From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Clemens Ladisch" Subject: Re: Can't set less than 48k rate in the Intel-ICH4 (AD1981B) Date: Thu, 21 Sep 2006 09:39:42 +0200 Message-ID: <1158824382.14818.271465641@webmail.messagingengine.com> References: <20060921130546.02f871fe@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20060921130546.02f871fe@localhost.localdomain> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@lists.sourceforge.net Errors-To: alsa-devel-bounces@lists.sourceforge.net To: Junji Umeno , "alsa-devel@lists.sourceforge.net" List-Id: alsa-devel@alsa-project.org Junji Umeno wrote: > I can't set less than 48kHz rate for capture sampling. > In my case, > Alsa prepares 4 pcm devices, > and I use the first 0-0 and the 4th 0-3, each playback and capture. So your system has more than one codec? > But when I set to the 3rd less than 48k rate, > Alsa shows error,"cannot set sample rate". > On the other way, > the 1st can be set less than 48k rate as a capture port. I'd guess the codec connected to the ICH4's 4th DMA input is another model. Regards, Clemens ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV