From: greg@kroah.com (Greg KH)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH 7/30] i2c-algo-sibyte: Merge into i2c-sibyte
Date: Wed, 27 Sep 2006 01:01:38 +0000 [thread overview]
Message-ID: <11593189412834-git-send-email-greg@kroah.com> (raw)
From: Jean Delvare <khali at linux-fr.org>
i2c-algo-sibyte: Merge into i2c-sibyte
Merge i2c-algo-sibyte into i2c-sibyte, as this is a complete,
hardware-dependent SMBus implementation and not a reusable algorithm.
Perform some basic coding style cleanups while we're here (mainly
space-based indentation replaced by tabulations.)
Signed-off-by: Jean Delvare <khali at linux-fr.org>
Cc: Ralf Baechle <ralf at linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/i2c/algos/Kconfig | 6 -
drivers/i2c/algos/Makefile | 1
drivers/i2c/algos/i2c-algo-sibyte.c | 186 -----------------------------------
drivers/i2c/busses/i2c-sibyte.c | 158 +++++++++++++++++++++++++++++-
include/linux/i2c-algo-sibyte.h | 33 ------
5 files changed, 155 insertions(+), 229 deletions(-)
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3040801..c034820 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -53,12 +53,6 @@ config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
-config I2C_ALGO_SIBYTE
- tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC && I2C
- help
- Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
config I2C_ALGO_SGI
tristate "I2C SGI interfaces"
depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 867fe1f..208be04 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bi
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
deleted file mode 100644
index 16d666f..0000000
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 2001,2002,2003 Broadcom Corporation
- Copyright (C) 1995-2000 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Ky?sti M?lkki <kmalkki at cc.hut.fi> and even
- Frodo Looijaard <frodol at dds.nl>. */
-
-/* Ported for SiByte SOCs by Broadcom Corporation. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sibyte.h>
-
-/* ----- global defines ----------------------------------------------- */
-#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-
-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan; /* have a look at what's hanging 'round */
-
-
-static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data * data)
-{
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
- int data_bytes = 0;
- int error;
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- switch (size) {
- case I2C_SMBUS_QUICK:
- csr_out32((V_SMB_ADDR(addr) | (read_write = I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
- V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
- break;
- case I2C_SMBUS_BYTE:
- if (read_write = I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_BYTE_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write = I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_WORD_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write = I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 2;
- } else {
- csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
- csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- default:
- return -1; /* XXXKW better error code? */
- }
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
- if (error & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
- return -1; /* XXXKW better error code? */
- }
-
- if (data_bytes = 1)
- data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
- if (data_bytes = 2)
- data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
-
- return 0;
-}
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
- return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
-}
-
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm i2c_sibyte_algo = {
- .smbus_xfer = smbus_xfer,
- .functionality = bit_func,
-};
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
-{
- int i;
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-
- /* register new adapter to i2c module... */
- i2c_adap->algo = &i2c_sibyte_algo;
-
- /* Set the frequency to 100 kHz */
- csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
- csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
-
- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
- return i2c_add_adapter(i2c_adap);
-}
-
-
-int i2c_sibyte_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
-
-EXPORT_SYMBOL(i2c_sibyte_add_bus);
-EXPORT_SYMBOL(i2c_sibyte_del_bus);
-
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index fa503ed..f516eb7 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2004 Steven J. Hill
* Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 1995-2000 Simon G. Vogl
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -17,11 +18,162 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/i2c-algo-sibyte.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_smbus.h>
+
+struct i2c_algo_sibyte_data {
+ void *data; /* private data */
+ int bus; /* which bus */
+ void *reg_base; /* CSR base */
+};
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+/* ----- global variables --------------------------------------------- */
+
+/* module parameters:
+ */
+static int bit_scan; /* have a look at what's hanging 'round */
+module_param(bit_scan, int, 0);
+MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data * data)
+{
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+ int data_bytes = 0;
+ int error;
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ csr_out32((V_SMB_ADDR(addr) |
+ (read_write = I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+ V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write = I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write = I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_LB(data->byte),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write = I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 2;
+ } else {
+ csr_out32(V_SMB_LB(data->word & 0xff),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32(V_SMB_MB(data->word >> 8),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ default:
+ return -1; /* XXXKW better error code? */
+ }
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+ if (error & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+ return -1; /* XXXKW better error code? */
+ }
+
+ if (data_bytes = 1)
+ data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+ if (data_bytes = 2)
+ data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+ return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+ return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static struct i2c_algorithm i2c_sibyte_algo = {
+ .smbus_xfer = smbus_xfer,
+ .functionality = bit_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+ int i;
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+ /* register new adapter to i2c module... */
+ i2c_adap->algo = &i2c_sibyte_algo;
+
+ /* Set the frequency to 100 kHz */
+ csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+ csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+ /* scan bus */
+ if (bit_scan) {
+ union i2c_smbus_data data;
+ int rc;
+ printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
+ i2c_adap->name);
+ for (i = 0x00; i < 0x7f; i++) {
+ /* XXXKW is this a realistic probe? */
+ rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &data);
+ if (!rc) {
+ printk("(%02x)",i);
+ } else
+ printk(".");
+ }
+ printk("\n");
+ }
+
+ return i2c_add_adapter(i2c_adap);
+}
+
+
static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
@@ -58,8 +210,8 @@ static int __init i2c_sibyte_init(void)
static void __exit i2c_sibyte_exit(void)
{
- i2c_sibyte_del_bus(&sibyte_board_adapter[0]);
- i2c_sibyte_del_bus(&sibyte_board_adapter[1]);
+ i2c_del_bus(&sibyte_board_adapter[0]);
+ i2c_del_bus(&sibyte_board_adapter[1]);
}
module_init(i2c_sibyte_init);
diff --git a/include/linux/i2c-algo-sibyte.h b/include/linux/i2c-algo-sibyte.h
deleted file mode 100644
index 03914de..0000000
--- a/include/linux/i2c-algo-sibyte.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef I2C_ALGO_SIBYTE_H
-#define I2C_ALGO_SIBYTE_H 1
-
-#include <linux/i2c.h>
-
-struct i2c_algo_sibyte_data {
- void *data; /* private data */
- int bus; /* which bus */
- void *reg_base; /* CSR base */
-};
-
-int i2c_sibyte_add_bus(struct i2c_adapter *, int speed);
-int i2c_sibyte_del_bus(struct i2c_adapter *);
-
-#endif /* I2C_ALGO_SIBYTE_H */
--
1.4.2.1
reply other threads:[~2006-09-27 1:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11593189412834-git-send-email-greg@kroah.com \
--to=greg@kroah.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.