From: Tejun Heo <htejun@gmail.com>
To: nabiki@teleline.es, kaos@ocs.com.au, stevenm@umd.edu,
jfs@keytradebank.com, 0602@eq.cz, jgarzik@pobox.com,
akpm@osdl.org, alan@lxorguk.ukuu.org.uk,
linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 1/6] ata_piix: clean up port flags
Date: Sat, 30 Sep 2006 15:46:49 +0900 [thread overview]
Message-ID: <1159598809262-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11595988092938-git-send-email-htejun@gmail.com>
* move common flags into PIIX_PATA_FLAGS and PIIX_SATA_FLAGS
* kill unnecessary ATA_FLAG_SRST
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ata_piix.c | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 5719704..cdb99dc 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -106,6 +106,9 @@ enum {
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
+ PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
*/
@@ -453,7 +456,7 @@ static struct ata_port_info piix_port_in
/* piix_pata_33: 0: PIIX3 or 4 at 33MHz */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
.udma_mask = ATA_UDMA_MASK_40C,
@@ -463,7 +466,7 @@ static struct ata_port_info piix_port_in
/* ich_pata_33: 1 ICH0 - ICH at 33Mhz*/
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS,
+ .flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
.udma_mask = ATA_UDMA2, /* UDMA33 */
@@ -472,7 +475,7 @@ static struct ata_port_info piix_port_in
/* ich_pata_66: 2 ICH controllers up to 66MHz */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS,
+ .flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* MWDMA0 is broken on chip */
.udma_mask = ATA_UDMA4,
@@ -482,7 +485,7 @@ static struct ata_port_info piix_port_in
/* ich_pata_100: 3 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -492,7 +495,7 @@ static struct ata_port_info piix_port_in
/* ich_pata_133: 4 ICH with full UDMA6 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SRST | ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
.udma_mask = ATA_UDMA6, /* UDMA133 */
@@ -502,8 +505,7 @@ static struct ata_port_info piix_port_in
/* ich5_sata: 5 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR |
- PIIX_FLAG_IGNORE_PCS,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -513,8 +515,7 @@ static struct ata_port_info piix_port_in
/* i6300esb_sata: 6 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -524,8 +525,7 @@ static struct ata_port_info piix_port_in
/* ich6_sata: 7 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -535,8 +535,7 @@ static struct ata_port_info piix_port_in
/* ich6_sata_ahci: 8 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -547,8 +546,7 @@ static struct ata_port_info piix_port_in
/* ich6m_sata_ahci: 9 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -559,8 +557,7 @@ static struct ata_port_info piix_port_in
/* ich7m_sata_ahci: 10 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -571,8 +568,7 @@ static struct ata_port_info piix_port_in
/* ich8_sata_ahci: 11 */
{
.sht = &piix_sht,
- .flags = ATA_FLAG_SATA |
- PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
--
1.4.2.1
next prev parent reply other threads:[~2006-09-30 6:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-30 6:46 [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix Tejun Heo
2006-09-30 6:46 ` Tejun Heo [this message]
2006-11-01 4:55 ` [PATCH 1/6] ata_piix: clean up port flags Jeff Garzik
2006-11-01 5:12 ` Tejun Heo
2006-11-01 5:19 ` Jeff Garzik
2006-11-01 5:35 ` Jeff Garzik
2006-09-30 6:46 ` [PATCH 3/6] libata: convert @post_reset to @flags in ata_dev_read_id() Tejun Heo
2006-11-01 5:36 ` Jeff Garzik
2006-09-30 6:46 ` [PATCH 2/6] libata: unexport ata_dev_revalidate() Tejun Heo
2006-09-30 6:46 ` [PATCH 5/6] ata_piix: apply device detection via polling IDENTIFY Tejun Heo
2006-09-30 6:46 ` [PATCH 6/6] ata_piix: strip now unneded MAP related stuff Tejun Heo
2006-09-30 6:46 ` [PATCH 4/6] libata: implement presence detection via polling IDENTIFY Tejun Heo
2006-09-30 8:59 ` [PATCHSET] libata: implement presence detection using polling IDENTIFY for ata_piix Alessandro Bono
2006-09-30 9:09 ` Alessandro Bono
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1159598809262-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=0602@eq.cz \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jfs@keytradebank.com \
--cc=jgarzik@pobox.com \
--cc=kaos@ocs.com.au \
--cc=linux-ide@vger.kernel.org \
--cc=nabiki@teleline.es \
--cc=stevenm@umd.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.