From: Aalderd Bouwman <aalderd.boac@wanadoo.nl>
To: Tejun Heo <htejun@gmail.com>
Cc: jgarzik@pobox.com, linux-ide@vger.kernel.org
Subject: Re: [PATCHSET] ahci updates regarding vt8251 support
Date: Sat, 14 Oct 2006 18:49:46 +0200 [thread overview]
Message-ID: <1160844586.3040.6.camel@anja> (raw)
In-Reply-To: <11607058883329-git-send-email-htejun@gmail.com>
Tejun,
The result of my test:
Loading the driver at boot:
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xE0006D00 ctl 0x0 bmdma 0x0 irq 10
ata2: SATA max UDMA/133 cmd 0xE0006D80 ctl 0x0 bmdma 0x0 irq 10
ata3: SATA max UDMA/133 cmd 0xE0006E00 ctl 0x0 bmdma 0x0 irq 10
ata4: SATA max UDMA/133 cmd 0xE0006E80 ctl 0x0 bmdma 0x0 irq 10
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST3808110AS 3.AA PQ: 0
ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Turning my drive on/mount/umount/off:
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen
ata2: (irq_stat 0x00000040, connection status changed)
ata2: waiting for device to spin up (8 secs)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0
ANSI: 5
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
ata2: exception Emask 0x10 SAct 0x0 SErr 0x30000 action 0x2 frozen
ata2: (irq_stat 0x04400000, PHY RDY changed)
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
Synchronizing SCSI cache for disk sdb:
FAILED
status = 0, message = 00, host = 4, driver = 00
<3>ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2
frozen
ata2: (irq_stat 0x00000040, connection status changed)
ata2: waiting for device to spin up (8 secs)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0
ANSI: 5
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
ReiserFS: sdb1: using ordered data mode
ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdb1: checking transaction log (sdb1)
ReiserFS: sdb1: Using r5 hash to sort names
ata2: exception Emask 0x10 SAct 0x0 SErr 0x30000 action 0x2 frozen
ata2: (irq_stat 0x04400000, PHY RDY changed)
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2: failed to recover some devices, retrying in 5 secs
ata2: hard resetting port
ata2: SATA link down (SStatus 0 SControl 300)
ata2.00: disabled
ata2: EH complete
ata2.00: detaching (SCSI 1:0:0:0)
Synchronizing SCSI cache for disk sdb:
FAILED
status = 0, message = 00, host = 4, driver = 00
As you see it works!!
Only you found FAILED by synchronizing the SCSI cache for disk sdb.
Is that a problem or did I forget anything?
Tejun: Did you also make NCQ working?
Aalderd.
On Fri, 2006-10-13 at 11:18 +0900, Tejun Heo wrote:
> Hello,
>
> This patchset updates libata and ahci to improve vt8251 EH and hotplug
> support.
>
> #01 : separate out sata_port_hardreset(), to be used by vt8251 reset
> #02 : update CLO handling in softreset and kill RESET_NEEDS_CLO
> #03 : update vt8251 support in ahci
>
> This patchset is against the current #upstream
> (da54f5fe54c7d75e2db7d17961fb36a8c28a8501).
>
> Aalderd, can you test this patchset?
>
> Thanks.
>
> --
> tejun
>
>
>
next prev parent reply other threads:[~2006-10-14 16:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 2:18 [PATCHSET] ahci updates regarding vt8251 support Tejun Heo
2006-10-13 2:18 ` [PATCH 1/3] libata: separate out and export sata_port_hardreset() Tejun Heo
2006-10-13 2:18 ` [PATCH 2/3] ahci: update softreset and kill AHCI_FLAG_RESET_NEEDS_CLO Tejun Heo
2006-10-13 2:18 ` [PATCH 3/3] ahci: update ahci-vt8251 reset sequence Tejun Heo
2006-10-14 16:49 ` Aalderd Bouwman [this message]
2006-10-15 5:47 ` [PATCHSET] ahci updates regarding vt8251 support Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1160844586.3040.6.camel@anja \
--to=aalderd.boac@wanadoo.nl \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.