From: greg@kroah.com (Greg KH)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH 4/8] smsc47m1: List the SMSC LPC47M112 as
Date: Wed, 18 Oct 2006 20:09:35 +0000 [thread overview]
Message-ID: <1161202189122-git-send-email-greg@kroah.com> (raw)
From: Jean Delvare <khali at linux-fr.org>
The SMSC LPC47M112 Super-I/O chip appears to be compatible with the
LPC47M10x and LPC47M13x as far as hardware monitoring is concerned.
The device ID is even the same, so it's really only a documentation
update.
Signed-off-by: Jean Delvare <khali at linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
Documentation/hwmon/smsc47m1 | 4 +++-
drivers/hwmon/Kconfig | 4 ++--
drivers/hwmon/smsc47m1.c | 11 ++++++-----
3 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index c15bbe6..04a1112 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -2,12 +2,14 @@ Kernel driver smsc47m1
===========
Supported chips:
- * SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
+ * SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x,
+ LPC47M15x and LPC47M192
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m1'
Datasheets:
http://www.smsc.com/main/datasheets/47b27x.pdf
http://www.smsc.com/main/datasheets/47m10x.pdf
+ http://www.smsc.com/main/datasheets/47m112.pdf
http://www.smsc.com/main/tools/discontinued/47m13x.pdf
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9b88b25..e0dede7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -369,8 +369,8 @@ config SENSORS_SMSC47M1
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
- LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
- LPC47M997 chips.
+ LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
+ LPC47M192 and LPC47M997 chips.
The temperature and voltage sensor features of the LPC47M192
and LPC47M997 are supported by another driver, select also
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 47132fd..beb881c 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -2,8 +2,8 @@
smsc47m1.c - Part of lm_sensors, Linux kernel modules
for hardware monitoring
- Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
- LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
+ Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
+ LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123 at yahoo.com>
Copyright (C) 2004 Jean Delvare <khali at linux-fr.org>
@@ -380,8 +380,8 @@ static int __init smsc47m1_find(unsigned
val = superio_inb(SUPERIO_REG_DEVID);
/*
- * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
- * 0x5F) and LPC47B27x (device id 0x51) have fan control.
+ * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
+ * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
* The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
* can do much more besides (device id 0x60).
* The LPC47M997 is undocumented, but seems to be compatible with
@@ -390,7 +390,8 @@ static int __init smsc47m1_find(unsigned
if (val = 0x51)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
else if (val = 0x59)
- printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
+ printk(KERN_INFO "smsc47m1: Found SMSC "
+ "LPC47M10x/LPC47M112/LPC47M13x\n");
else if (val = 0x5F)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
else if (val = 0x60)
--
1.4.2.4
reply other threads:[~2006-10-18 20:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1161202189122-git-send-email-greg@kroah.com \
--to=greg@kroah.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.