From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 16 May 2008 14:40:02 +0200 Message-Id: <1165867616@domain.hid> MIME-Version: 1.0 From: Paradoxxa2001@domain.hid Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai-help] =?iso-8859-15?q?at91sam9263_and_user-space_support?= =?iso-8859-15?q?_compile_fails?= List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org The manual of my starterkit says i should do this with the vmlinux: arm-elf-objcopy -O binary -S vmImage vmlinux.bin gzip -f9 vmlinux.bin mkimage -A arm -O linux -T kernel -C gzip -a 0x20008000 -e 0x20008000 -n "= Linux Kernel Image" -d vmlinux.bin.gz vmImage When im take the ./arch/arm/boot/compressed/vmlinux it won't work. If i take the ./vmlinux it is to big. -----Urspr=FCngliche Nachricht----- Von: "Gilles Chanteperdrix" Gesendet: 16.05.08 14:18:30 An: Paradoxxa2001@domain.hid CC: xenomai@xenomai.org Betreff: Re: [Xenomai-help] at91sam9263 and user-space support compile fai= ls On Fri, May 16, 2008 at 1:07 PM, wrote: > I have found some debug flags. > Now the vmlinux is smaller but still to big > > -rwxr-xr-x 1 paradoxxa paradoxxa 4,8M 16. Mai 12:36 vmlinux > -rwxr-xr-x 1 paradoxxa paradoxxa 1,7M 16. Mai 12:36 arch/arm/boot/compre= ssed/vmlinux A 1.7M vmlinux is Ok. I do not understand what you mean. --=20 Gilles =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/=3Fmc=3D100071&distributionid=3D000000000066