From: Yan Burman <burman.yan@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: auke-jan.h.kok@intel.com
Subject: [PATCH 2.6.19] e1000: replace kmalloc+memset with kcalloc and indent the way it is done in other parts of e1000
Date: Wed, 13 Dec 2006 09:43:55 +0200 [thread overview]
Message-ID: <1165995835.11348.3.camel@localhost> (raw)
Replace kmalloc+memset with kcalloc + remove now unused size variable
Signed-off-by: Yan Burman <burman.yan@gmail.com>
diff -rubp linux-2.6.19_orig/drivers/net/e1000/e1000_ethtool.c linux-2.6.19_tests/drivers/net/e1000/e1000_ethtool.c
--- linux-2.6.19_orig/drivers/net/e1000/e1000_ethtool.c 2006-11-30 21:28:21.000000000 +0200
+++ linux-2.6.19_tests/drivers/net/e1000/e1000_ethtool.c 2006-12-13 09:31:25.000000000 +0200
@@ -1045,19 +1045,18 @@ e1000_setup_desc_rings(struct e1000_adap
struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
uint32_t rctl;
- int size, i, ret_val;
+ int i, ret_val;
/* Setup Tx descriptor ring and Tx buffers */
if (!txdr->count)
txdr->count = E1000_DEFAULT_TXD;
- size = txdr->count * sizeof(struct e1000_buffer);
- if (!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
+ if (!(txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL))) {
ret_val = 1;
goto err_nomem;
}
- memset(txdr->buffer_info, 0, size);
txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
E1000_ROUNDUP(txdr->size, 4096);
@@ -1108,12 +1107,11 @@ e1000_setup_desc_rings(struct e1000_adap
if (!rxdr->count)
rxdr->count = E1000_DEFAULT_RXD;
- size = rxdr->count * sizeof(struct e1000_buffer);
- if (!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) {
+ if (!(rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL))) {
ret_val = 4;
goto err_nomem;
}
- memset(rxdr->buffer_info, 0, size);
rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
if (!(rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma))) {
diff -rubp linux-2.6.19_orig/drivers/net/e1000/e1000_main.c linux-2.6.19_tests/drivers/net/e1000/e1000_main.c
--- linux-2.6.19_orig/drivers/net/e1000/e1000_main.c 2006-11-30 21:28:21.000000000 +0200
+++ linux-2.6.19_tests/drivers/net/e1000/e1000_main.c 2006-12-13 09:34:19.000000000 +0200
@@ -1225,31 +1225,26 @@ e1000_sw_init(struct e1000_adapter *adap
static int __devinit
e1000_alloc_queues(struct e1000_adapter *adapter)
{
- int size;
-
- size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
- adapter->tx_ring = kmalloc(size, GFP_KERNEL);
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
if (!adapter->tx_ring)
return -ENOMEM;
- memset(adapter->tx_ring, 0, size);
- size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
- adapter->rx_ring = kmalloc(size, GFP_KERNEL);
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
if (!adapter->rx_ring) {
kfree(adapter->tx_ring);
return -ENOMEM;
}
- memset(adapter->rx_ring, 0, size);
#ifdef CONFIG_E1000_NAPI
- size = sizeof(struct net_device) * adapter->num_rx_queues;
- adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
+ adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
+ sizeof(struct net_device), GFP_KERNEL);
if (!adapter->polling_netdev) {
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
return -ENOMEM;
}
- memset(adapter->polling_netdev, 0, size);
#endif
return E1000_SUCCESS;
@@ -1625,18 +1620,17 @@ e1000_setup_rx_resources(struct e1000_ad
}
memset(rxdr->buffer_info, 0, size);
- size = sizeof(struct e1000_ps_page) * rxdr->count;
- rxdr->ps_page = kmalloc(size, GFP_KERNEL);
+ rxdr->ps_page = kcalloc(rxdr->count, sizeof(struct e1000_ps_page),
+ GFP_KERNEL);
if (!rxdr->ps_page) {
vfree(rxdr->buffer_info);
DPRINTK(PROBE, ERR,
"Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
- memset(rxdr->ps_page, 0, size);
- size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
- rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
+ rxdr->ps_page_dma = kcalloc(rxdr->count, sizeof(struct e1000_ps_page_dma),
+ GFP_KERNEL);
if (!rxdr->ps_page_dma) {
vfree(rxdr->buffer_info);
kfree(rxdr->ps_page);
@@ -1644,7 +1638,6 @@ e1000_setup_rx_resources(struct e1000_ad
"Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
- memset(rxdr->ps_page_dma, 0, size);
if (adapter->hw.mac_type <= e1000_82547_rev_2)
desc_len = sizeof(struct e1000_rx_desc);
reply other threads:[~2006-12-13 7:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1165995835.11348.3.camel@localhost \
--to=burman.yan@gmail.com \
--cc=auke-jan.h.kok@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.