Re: [PATCH] SMU LED driver

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Sun, 2006-12-24 at 12:23 +0100, Michael Hanselmann wrote:
> This patch adds a driver for the front LED in recent PowerMacs which
> have an SMU.

As for the PMU driver, I'm pretty unhappy that it sycnhronously waits
for the completion. The original code I wrote was fully asynchronous.

Ben.

> Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
> 
> ---
> diff -Nrup --exclude-from linux-exclude-from linux-2.6.19.1.orig/drivers/macintosh/Kconfig linux-2.6.19.1/drivers/macintosh/Kconfig
> --- linux-2.6.19.1.orig/drivers/macintosh/Kconfig	2006-12-24 12:19:05.000000000 +0100
> +++ linux-2.6.19.1/drivers/macintosh/Kconfig	2006-12-24 12:19:41.000000000 +0100
> @@ -107,6 +107,15 @@ config PMAC_SMU
>  	  on the "SMU" system control chip which replaces the old PMU.
>  	  If you don't know, say Y.
>  
> +config PMAC_SMU_LED
> +	tristate "Support for the PowerMac front LED"
> +	depends on PMAC_SMU
> +	select NEW_LEDS
> +	select LEDS_CLASS
> +	help
> +	  Support the front LED on PowerMacs as a generic LED that can be
> +	  triggered by any of the supported triggers.
> +
>  config PMAC_APM_EMU
>  	tristate "APM emulation"
>  	depends on PPC_PMAC && PPC32 && PM && ADB_PMU
> diff -Nrup --exclude-from linux-exclude-from linux-2.6.19.1.orig/drivers/macintosh/Makefile linux-2.6.19.1/drivers/macintosh/Makefile
> --- linux-2.6.19.1.orig/drivers/macintosh/Makefile	2006-12-24 12:19:05.000000000 +0100
> +++ linux-2.6.19.1/drivers/macintosh/Makefile	2006-12-24 12:19:24.000000000 +0100
> @@ -17,6 +17,7 @@ obj-$(CONFIG_PMAC_BACKLIGHT)	+= via-pmu-
>  obj-$(CONFIG_ADB_CUDA)		+= via-cuda.o
>  obj-$(CONFIG_PMAC_APM_EMU)	+= apm_emu.o
>  obj-$(CONFIG_PMAC_SMU)		+= smu.o
> +obj-$(CONFIG_PMAC_SMU_LED)	+= smu-led.o
>  
>  obj-$(CONFIG_ADB)		+= adb.o
>  obj-$(CONFIG_ADB_MACII)		+= via-macii.o
> diff -Nrup --exclude-from linux-exclude-from linux-2.6.19.1.orig/drivers/macintosh/smu-led.c linux-2.6.19.1/drivers/macintosh/smu-led.c
> --- linux-2.6.19.1.orig/drivers/macintosh/smu-led.c	1970-01-01 01:00:00.000000000 +0100
> +++ linux-2.6.19.1/drivers/macintosh/smu-led.c	2006-12-24 12:19:24.000000000 +0100
> @@ -0,0 +1,91 @@
> +/*
> + * smu LED class device
> + *
> + * Copyright 2006 Michael Hanselmann <linux-kernel@hansmi.ch>
> + *
> + * This code is based upon via-pmu-led, written by Johannes Berg, and a sample
> + * program written by Benjamin Herrenschmidt.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> + * NON INFRINGEMENT.  See the GNU General Public License for more
> + * details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
> + */
> +
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/leds.h>
> +#include <asm/smu.h>
> +
> +static void smu_led_set(struct led_classdev *led_cdev,
> +		enum led_brightness brightness)
> +{
> +	struct smu_simple_cmd cmd;
> +	DECLARE_COMPLETION_ONSTACK(comp);
> +	unsigned int value;
> +	int rc;
> +
> +	switch (brightness) {
> +	case LED_OFF:
> +		value = 0;
> +		break;
> +
> +	case LED_FULL:
> +		value = 1;
> +		break;
> +
> +	default:
> +		return;
> +	}
> +
> +	rc = smu_queue_simple(&cmd, SMU_CMD_MISC_ee_COMMAND, 3,
> +		smu_done_complete, &comp,
> +		SMU_CMD_MISC_ee_LEDS_CTRL, 0x00, value);
> +	if (rc) {
> +		printk(KERN_ERR "smu-led: "
> +			"Queueing failed, error %d\n", rc);
> +		return;
> +	}
> +
> +	wait_for_completion(&comp);
> +
> +	if (cmd.cmd.status != 0) {
> +		printk(KERN_ERR "smu-led: Setting LED value failed\n");
> +		return;
> +	}
> +}
> +
> +static struct led_classdev smu_led = {
> +	.name = "smu-front-led",
> +	.brightness_set = smu_led_set,
> +};
> +
> +static int __init smu_led_init(void)
> +{
> +	if (!smu_present())
> +		return -ENODEV;
> +
> +	return led_classdev_register(NULL, &smu_led);
> +}
> +
> +static void __exit smu_led_exit(void)
> +{
> +}
> +
> +module_init(smu_led_init);
> +module_exit(smu_led_exit);
> +
> +MODULE_AUTHOR("Michael Hanselmann <linux-kernel@hansmi.ch>");
> +MODULE_DESCRIPTION("Front LED support for SMU based PowerMacs");
> +MODULE_LICENSE("GPL");