From: Tobin Davis <tdavis@dsl-only.net>
To: Michael Ringe <Michael.Ringe@web.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: intel_hda model parameter for Samsung Q35
Date: Tue, 02 Jan 2007 15:39:46 -0800 [thread overview]
Message-ID: <1167781186.31371.150.camel@localhost> (raw)
In-Reply-To: <459AE9DF.4050001@web.de>
[-- Attachment #1.1: Type: text/plain, Size: 6873 bytes --]
Could you also indicate what audio codec this system has? It should
show in alsamixer, or better yet, post "cat /proc/asound/card0/codec*".
Thanks,
Tobin
On Wed, 2007-01-03 at 00:25 +0100, Michael Ringe wrote:
> Using the dribers included in Kernel 2.6.19
> My hardware is a Samsung Q35 Pro (Intel Core 2 Duo T5500)
>
> Loading snd_hda_intel without parameters produces strong high frequency noise.
>
> I am now using model=3stack which works fine and also shows the SPDIF output
> controls (I could not test SPDIF, though).
> Feel free to contact me for any further information.
>
> --Michael
>
> lspci -nv follows
>
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0
> Capabilities: <access denied>
>
> 00:02.0 0300: 8086:27a2 (rev 03)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at d8100000 (32-bit, non-prefetchable) [size=512K]
> I/O ports at 1800 [size=8]
> Memory at c0000000 (32-bit, prefetchable) [size=256M]
> Memory at d8200000 (32-bit, non-prefetchable) [size=256K]
> Capabilities: <access denied>
>
> 00:02.1 0380: 8086:27a6 (rev 03)
> Subsystem: 144d:c504
> Flags: fast devsel
> Memory at d8180000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: <access denied>
>
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at d8240000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:1c.0 0604: 8086:27d0 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: d4000000-d5ffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000d1f00000
> Capabilities: <access denied>
>
> 00:1c.1 0604: 8086:27d2 (rev 02)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
> Capabilities: <access denied>
>
> 00:1d.0 0c03: 8086:27c8 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 22
> I/O ports at 1820 [size=32]
>
> 00:1d.1 0c03: 8086:27c9 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 23
> I/O ports at 1840 [size=32]
>
> 00:1d.2 0c03: 8086:27ca (rev 02)
> Subsystem: 144d:c50400:1d.3 0c03: 8086:27cb (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 17
> I/O ports at 1880 [size=32]
>
> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 22
> Memory at d8444000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
>
> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01)
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: d8000000-d80fffff
> Prefetchable memory behind bridge: 0000000050000000-0000000051f00000
> Capabilities: <access denied>
>
> 00:1f.0 0601: 8086:27b9 (rev 02)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0
> Capabilities: <access denied>
>
> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at 1810 [size=16]
>
> 00:1f.3 0c05: 8086:27da (rev 02)
> Subsystem: 144d:c504
> Flags: medium devsel, IRQ 23
> I/O ports at 18a0 [size=32]
>
> 02:00.0 0280: 8086:4222 (rev 02)
> Subsystem: 8086:1001
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 05:05.0 0200: 14e4:170c (rev 02)05:09.0 0607: 1180:0476 (rev b4)
> Subsystem: 144d:c504
> Flags: bus master, medium devsel, latency 168, IRQ 18
> Memory at d8004000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
> Memory window 0: 50000000-51fff000 (prefetchable)
> Memory window 1: 52000000-53fff000
> I/O window 0: 00003000-000030ff
> I/O window 1: 00003400-000034ff
> 16-bit legacy interface ports at 0001
>
> 05:09.1 0c00: 1180:0552 (rev 09) (prog-if 10)
> Subsystem: 144d:c024
> Flags: bus master, medium devsel, latency 64, IRQ 21
> Memory at d8002000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
>
> 05:09.2 0805: 1180:0822 (rev 18)
> Subsystem: 144d:c024
> Flags: bus master, medium devsel, latency 64, IRQ 19
> Memory at d8002800 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
> 05:09.3 0880: 1180:0843
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8002c00 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> 05:09.4 0880: 1180:0592 (rev 09)
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8003000 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> 05:09.5 0880: 1180:0852 (rev 04)
> Subsystem: 144d:c024
> Flags: medium devsel, IRQ 255
> Memory at d8003400 (32-bit, non-prefetchable) [disabled] [size=256]
> Capabilities: <access denied>
>
> Subsystem: 144d:c504
> Flags: bus master, fast devsel, latency 32, IRQ 19
> Memory at d8000000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
>
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at 1860 [size=32]
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 11309 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2007-01-02 23:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-02 23:25 intel_hda model parameter for Samsung Q35 Michael Ringe
2007-01-02 23:39 ` Tobin Davis [this message]
2007-01-04 21:50 ` Michael Ringe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1167781186.31371.150.camel@localhost \
--to=tdavis@dsl-only.net \
--cc=Michael.Ringe@web.de \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.