From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 19 May 2008 08:26:54 +0200 Message-Id: <1168701330@domain.hid> MIME-Version: 1.0 From: Paradoxxa2001@domain.hid Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai-help] =?iso-8859-15?q?at91sam9263_and_user-space_support?= =?iso-8859-15?q?_compile_fails?= List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org God Morning, I tried "make uImage" already. I got the messages like: uncompressing kernel--- crc error --System halted I saw that the scripts uses zImage to make the uImage. And the uImage is b= uilt from the arch/arm/boot/compressed/vmlinux. The difference what i saw is th= at no=20 compression is used to build the uImage by the scripts. The Kernel with the printascii Function begin to start.=20 Here are the logs: --------------------------------------------------------------------------= -------------------- Starting kernel ... <5>Linux version 2.6.24-paradoxxa-pm9263 (support@domain.hid) (gcc version= 4.2.3 (Sourcery G++ Lite 2 008q1-126)) #7 Mon May 19 08:01:12 CEST 2008 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=3D00053177 Machine: Ronetix PM9263/BB9263 <4>Ignoring unrecognised tag 0x54410008 Memory policy: ECC disabled, Data cache writeback <7>On node 0 totalpages: 16384 <7> DMA zone: 128 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 16256 pages, LIFO batch:3 <7> Normal zone: 0 pages used for memmap <7> Movable zone: 0 pages used for memmap Clocks: CPU 199 MHz, master 99 MHz, main 18.432 MHz CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256= <5>Kernel command line: root=3D/dev/mtdblock4 rootfstype=3Djffs2 fbcon=3Drotate:= 3 mtdparts=3Dphysmap-flash.0 :256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand) ip=3D= 10.0.0.17:10.0.0.20:10.0.0 .20:255.255.255.0:PM9263:eth0:off <6>AT91: 160 gpio irqs in 5 banks PID hash table entries: 256 (order: 8, 1024 bytes) <6>I-pipe 1.9-01: pipeline enabled. Console: colour dummy device 80x30 <6>console [tty0] enabled <6>console [ttyS0] enabled Linux version 2.6.24-paradoxxa-pm9263 (support@domain.hid) (gcc version 4.= 2.3 (Sourcery G++ Lite 2008 q1-126)) #7 Mon May 19 08:01:12 CEST 2008 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=3D00053177 Machine: Ronetix PM9263/BB9263 Ignoring unrecognised tag 0x54410008 Memory policy: ECC disabled, Data cache writeback Clocks: CPU 199 MHz, master 99 MHz, main 18.432 MHz CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256= Kernel command line: root=3D/dev/mtdblock4 rootfstype=3Djffs2 fbcon=3Drotate:3 m= tdparts=3Dphysmap-flash.0:25 6k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand) ip=3D10.= 0.0.17:10.0.0.20:10.0.0.20 :255.255.255.0:PM9263:eth0:off AT91: 160 gpio irqs in 5 banks PID hash table entries: 256 (order: 8, 1024 bytes) I-pipe 1.9-01: pipeline enabled. Console: colour dummy device 80x30 console [tty0] enabled console [ttyS0] enabled <6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) <6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) <6>Memory:Memory: 64MB 64MB =3D 64MB total =3D 64MB total <5>Memory: 61184KB available (3220K code, 388K data, 108K init) Memory: 61184KB available (3220K code, 388K data, 108K init) <7>Calibrating delay loop... 99.12 BogoMIPS (lpj=3D495616) Mount-cache hash table entries: 512 Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: CPU: Testing write buffer coherenc= y: ok ok <6>net=5Fnamespace: 64 bytes net=5Fnamespace: 64 bytes <6>NET: Registered protocol family 16 NET: Registered protocol family 16 <6>usbcore: registered new interface driver usbfs usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb usbcore: registered new device driver usb <6>NET: Registered protocol family 2 NET: Registered protocol family 2 <6>Time: at91=5Ftc0 clocksource has been installed. Time: at91=5Ftc0 clocksource has been installed. <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) <6>TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) <6>TCP: Hash tables configured (established 2048 bind 2048) TCP: Hash tables configured (established 2048 bind 2048) <6>TCP reno registered TCP reno registered <4>NetWinder Floating Point Emulator V0.97 (double precision) NetWinder Floating Point Emulator V0.97 (double precision) <6>I-pipe: Domain Xenomai registered. I-pipe: Domain Xenomai registered. <6>Xenomai: hal/arm started. Xenomai: hal/arm started. <6>Xenomai: real-time nucleus v2.4.3 (Back to Shalla-Bal) loaded. Xenomai: real-time nucleus v2.4.3 (Back to Shalla-Bal) loaded. <6>Xenomai: starting native API services. Xenomai: starting native API services. <6>Xenomai: starting POSIX services. Xenomai: starting POSIX services. <6>Xenomai: starting RTDM services. Xenomai: starting RTDM services. <6>JFFS2 version 2.2. (NAND) =C2=A9 2001-2006 Red Hat, Inc. JFFS2 version 2.2. (NAND) =C2=A9 2001-2006 Red Hat, Inc. <6>io scheduler noop registered io scheduler noop registered <6>io scheduler anticipatory registered (default) io scheduler anticipatory registered (default) <6>atmel=5Flcdfb atmel=5Flcdfb.0: 4096KiB frame buffer at 70000000 (mapped at = c5000000) atmel=5Flcdfb atmel=5Flcdfb.0: 4096KiB frame buffer at 70000000 (mapped at c50= 00000) Console: switching to colour frame buffer device 40x30 Console: switching to colour frame buffer device 40x30 <6>atmel=5Flcdfb atmel=5Flcdfb.0: fb0: Atmel LCDC at 0x00700000 (mapped at c48= 50000), irq 26 atmel=5Flcdfb atmel=5Flcdfb.0: fb0: Atmel LCDC at 0x00700000 (mapped at c48500= 00), irq 26 <6>atmel=5Fusart.0: ttyS0 at MMIO 0xfeffee00 (irq =3D 1) is a ATMEL=5FSERIAL atmel=5Fusart.0: ttyS0 at MMIO 0xfeffee00 (irq =3D 1) is a ATMEL=5FSERIAL <6>atmel=5Fusart.1: ttyS1 at MMIO 0xfff8c000 (irq =3D 7) is a ATMEL=5FSERIAL atmel=5Fusart.1: ttyS1 at MMIO 0xfff8c000 (irq =3D 7) is a ATMEL=5FSERIAL <6>MACB=5Fmii=5Fbus: probed MACB=5Fmii=5Fbus: probed <6>eth0: Atmel MACB at 0xfffbc000 irq 21 (02:00:11:53:d0:85) eth0: Atmel MACB at 0xfffbc000 irq 21 (02:00:11:53:d0:85) <6>eth0: attached PHY driver [Generic PHY] (mii=5Fbus:phy=5Faddr=3Dffffffff:01, = irq=3D-1) eth0: attached PHY driver [Generic PHY] (mii=5Fbus:phy=5Faddr=3Dffffffff:01, irq= =3D-1) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 50MHz system bus speed for PIO modes; override with idebu= s=3Dxx ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=3Dx= x <5>physmap platform flash device: 04000000 at 10000000 physmap platform flash device: 04000000 at 10000000 <6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank <7>physmap-flash.0: Found an alias at 0x400000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0xc00000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x1400000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x1c00000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x2000000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x2400000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x2800000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x2c00000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x3000000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x3400000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x3800000 for the chip at 0x0 <7>physmap-flash.0: Found an alias at 0x3c00000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query Table at 0x0040 <5>number of CFI chips: 1 number of CFI chips: 1 <5>cfi=5Fcmdset=5F0002: Disabling erase-suspend-program due to code brokenness= . cfi=5Fcmdset=5F0002: Disabling erase-suspend-program due to code brokenness. <5>4 cmdlinepart partitions found on MTD device physmap-flash.0 4 cmdlinepart partitions found on MTD device physmap-flash.0 <5>Creating 4 MTD partitions on "physmap-flash.0": Creating 4 MTD partitions on "physmap-flash.0": <5>0x00000000-0x00040000 : "u-boot" 0x00000000-0x00040000 : "u-boot" <5>0x00040000-0x00050000 : "u-boot-env" 0x00040000-0x00050000 : "u-boot-env" <5>0x00050000-0x001b0000 : "kernel" 0x00050000-0x001b0000 : "kernel" <5>0x001b0000-0x00400000 : "rootfs" 0x001b0000-0x00400000 : "rootfs" <6>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3= ,3V 8-bit) NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V= 8-bit) <6>AT91 NAND: 8-bit, Software ECC AT91 NAND: 8-bit, Software ECC <6>Scanning device for bad blocks Scanning device for bad blocks <5>Creating 1 MTD partitions on "at91=5Fnand": Creating 1 MTD partitions on "at91=5Fnand": <5>0x00000000-0x10000000 : "nand" 0x00000000-0x10000000 : "nand" <6>atmel=5Fspi atmel=5Fspi.0: Atmel SPI Controller at 0xfffa4000 (irq 14) atmel=5Fspi atmel=5Fspi.0: Atmel SPI Controller at 0xfffa4000 (irq 14) <6>mtd=5Fdataflash spi0.0: AT45DB321x (4224 KBytes) mtd=5Fdataflash spi0.0: AT45DB321x (4224 KBytes) <6>atmel=5Fspi atmel=5Fspi.1: Atmel SPI Controller at 0xfffa8000 (irq 15) atmel=5Fspi atmel=5Fspi.1: Atmel SPI Controller at 0xfffa8000 (irq 15) <6>at91=5Fcf: irqs det #62, io #56 at91=5Fcf: irqs det #62, io #56 <7>ohci=5Fhcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <6>at91=5Fohci at91=5Fohci: AT91 OHCI at91=5Fohci at91=5Fohci: AT91 OHCI <6>at91=5Fohci at91=5Fohci: new USB bus registered, assigned bus number 1 at91=5Fohci at91=5Fohci: new USB bus registered, assigned bus number 1 <6>at91=5Fohci at91=5Fohci: irq 29, io mem 0x00a00000 at91=5Fohci at91=5Fohci: irq 29, io mem 0x00a00000 <6>usb usb1: configuration #1 chosen from 1 choice usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected hub 1-0:1.0: 2 ports detected <6>mice: PS/2 mouse device common for all mice mice: PS/2 mouse device common for all mice <6>ads7846 spi1.0: touchscreen, irq 31 ads7846 spi1.0: touchscreen, irq 31 <6>input: ADS784x Touchscreen as /class/input/input0 input: ADS784x Touchscreen as /class/input/input0 <6>rtc-at91sam9 at91=5Frtt.0: rtc core: registered at91=5Frtt as rtc0 rtc-at91sam9 at91=5Frtt.0: rtc core: registered at91=5Frtt as rtc0 <6>Driver for 1-wire Dallas network protocol. Driver for 1-wire Dallas network protocol. <6>pm926x=5Fw1, gpio pin 95 pm926x=5Fw1, gpio pin 95 <6>Registered led device: led0 Registered led device: led0 <6>Registered led device: led1 Registered led device: led1 <6>usbcore: registered new interface driver usbhid usbcore: registered new interface driver usbhid <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <6>Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:= 16:42 2007 UTC). Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:= 42 2007 UTC). <6>ALSA sound/arm/at91-ac97.c:564: ALSA sound/arm/at91-ac97.c:564: AC97C r= egs =3D FFFA0000 AC97C regs =3D FFFA0000 <6>ALSA sound/arm/at91-ac97.c:565: ALSA sound/arm/at91-ac97.c:565: AC97C i= rq =3D 18 AC97C irq =3D 18 <4>ALSA sound/arm/at91-ac97.c:493: ALSA sound/arm/at91-ac97.c:493: at91-ac= 97: codec read timeout 1 at91-ac97: codec read timeout 1 <4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91= -ac97: codec read timeout 1 at91-ac97: codec read timeout 1 <4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91= -ac97: codec read timeout 1 at91-ac97: codec read timeout 1 <4>ALSA sound/arm/at91-ac97.c:493: <4>ALSA sound/arm/at91-ac97.c:493: at91= -ac97: codec read timeout 1 at91-ac97: codec read timeout 1 <6>ASoC version 0.13.1 <6>ASoC version 0.13.1 <6>ALSA device list: ALSA device list: <6> #0: Atmel AC97 Controller at 0xfffa0000, irq 18 #0: Atmel AC97 Controller at 0xfffa0000, irq 18 <6>TCP cubic registered TCP cubic registered <6>NET: Registered protocol family 1 NET: Registered protocol family 1 <6>NET: Registered protocol family 17 NET: Registered protocol family 17 <6>RPC: Registered udp transport module. RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. RPC: Registered tcp transport module. <6>rtc-at91sam9 at91=5Frtt.0: setting system clock to 2008-05-19 08:15:34 UT= C (1211184934) rtc-at91sam9 at91=5Frtt.0: setting system clock to 2008-05-19 08:15:34 UTC (= 1211184934) IP-Config: Complete:IP-Config: Complete: device=3Deth0 device=3Deth0, addr=3D10.0.0.17, addr=3D10.0.0.17, mask=3D255.255.255.0, mas= k=3D255.255.255.0, gw=3D10.0.0 .20, gw=3D10.0.0.20, host=3DPM9263, domain=3D, nis-domain=3D(none), host=3DPM9263, domain=3D, nis-domain=3D(none), bootserver=3D10.0.0.20, bootserver=3D10.0.0.20, rootserver=3D10.0.0.20, rootserver=3D10.0.0.20, roo= tpath=3D, rootpath=3D <1>Unable to handle kernel NULL pointer dereference at virtual address 000= 00001 Unable to handle kernel NULL pointer dereference at virtual address 000000= 01 <1>pgd =3D c0004000 pgd =3D c0004000 <1>[00000001] *pgd=3D00000000[00000001] *pgd=3D00000000 Internal error: Oops: 5 [#1] Internal error: Oops: 5 [#1] Modules linked in:Modules linked in: CPU: 0 Not tainted (2.6.24-paradoxxa-pm9263 #7) CPU: 0 Not tainted (2.6.24-paradoxxa-pm9263 #7) PC is at name=5Fto=5Fdev=5Ft+0x160/0x28c PC is at name=5Fto=5Fdev=5Ft+0x160/0x28c LR is at name=5Fto=5Fdev=5Ft+0x13c/0x28c LR is at name=5Fto=5Fdev=5Ft+0x13c/0x28c pc : [] lr : [] psr: 20000013 sp : c3c17f2c ip : c3c17f2c fp : c3c17f78 pc : [] lr : [] psr: 20000013 sp : c3c17f2c ip : c3c17f2c fp : c3c17f78 r10: 00000000 r9 : 00000000 r8 : c3c16000 r10: 00000000 r9 : 00000000 r8 : c3c16000 r7 : 00000000 r6 : 00000000 r5 : c001d871 r4 : c3c17f30 r7 : 00000000 r6 : 00000000 r5 : c001d871 r4 : c3c17f30 r3 : 00000001 r2 : 00000001 r1 : 0000006d r0 : 00001730 r3 : 00000001 r2 : 00000001 r1 : 0000006d r0 : 00001730 Flags: nzCv IRQs on FIQs on Mode SVC=5F32 ISA ARM Segment kernel Flags: nzCv IRQs on FIQs on Mode SVC=5F32 ISA ARM Segment kernel Control: 0005317f Table: 20004000 DAC: 00000017 Control: 0005317f Table: 20004000 DAC: 00000017 Process swapper (pid: 1, stack limit =3D 0xc3c16258) Process swapper (pid: 1, stack limit =3D 0xc3c16258) Stack: (0xc3c17f2c to 0xc3c18000) Stack: (0xc3c17f2c to 0xc3c18000) 7f20: 7f20: 00000000= 00000000 6264746d 6264746 d 6b636f6c 6b636f6c c3c10034 c3c10034 c3c17f48 c3c17f48 7f40: 7f40: c004b3fc c004b3fc c006185c c006185c 00000003 00000003 00000000= 00000000 00000000 0000000 0 00000000 00000000 00000001 00000001 c001d86c c001d86c 7f60: 7f60: c001d85c c001d85c 00000000 00000000 c001c070 c001c070 c3c17f94= c3c17f94 c3c17f7c c3c17f7 c c0009328 c0009328 c00236c0 c00236c0 c3c17f88 c3c17f88 7f80: 7f80: c036a4e0 c036a4e0 00000000 00000000 c3c17ff4 c3c17ff4 c3c17f98= c3c17f98 c0008a98 c0008a9 8 c00092a4 c00092a4 00000000 00000000 00000000 00000000 7fa0: 7fa0: 00000000 00000000 c3c17fb0 c3c17fb0 c0024060 c0024060 c0037720= c0037720 00000000 0000000 0 00000000 00000000 c0008868 c0008868 c003ddbc c003ddbc 7fc0: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000= 00000000 00000000 0000000 0 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 7fe0: 00000000 00000000 00000000 00000000 00000000 00000000 c3c17ff8= c3c17ff8 c003ddbc c003ddb c c0008878 c0008878 0f73fc8c 0f73fc8c 1f13ac4e 1f13ac4e Backtrace: Backtrace: [] [] (name=5Fto=5Fdev=5Ft+0x0/0x28c) (name=5Fto=5Fdev=5Ft+0x0/0x2= 8c) from [] from [] (prepare=5Fnamespace+0x94/0x16c) (prepare=5Fnamespace+0x94/0x16c) r7:c001c070 r7:c001c070 r6:00000000 r6:00000000 r5:c001d85c r5:c001d85c r= 4:c001d86c r4:c001d86c [] [] (prepare=5Fnamespace+0x0/0x16c) (prepare=5Fnamespace= +0x0/0x16c) from [] from [] (kernel=5Finit+0x230/0x290) (kernel=5Finit+0x230/0x290) r5:00000000 r5:00000000 r4:c036a4e0 r4:c036a4e0 [] [] (kernel=5Finit+0x0/0x290) (kernel=5Finit+0x0/0x290) = from [] from [] (do=5Fexit+0x0/0x790) (do=5Fexit+0x0/0x790) Code: Code: 20000220 20000220 e2833001 e2833001 e50b3020 e50b3020 e51b2020= e51b2020 (e5d21000) (e5d2 1000) <4>---[ end trace aae4ab6fc1a48acc ]--- ---[ end trace aae4ab6fc1a48acc ]--- <0>Kernel panic - not syncing: Attempted to kill init! Kernel panic - not syncing: Attempted to kill init! <6>eth0: link up (100/Full) eth0: link up (100/Full) --------------------------------------------------------------------------= -------------------- Thomas -----Urspr=FCngliche Nachricht----- Von: "Gilles Chanteperdrix" Gesendet: 16.05.08 17:28:23 An: Paradoxxa2001@domain.hid CC: xenomai@xenomai.org Betreff: Re: [Xenomai-help] at91sam9263 and user-space support compile fai= ls On Fri, May 16, 2008 at 4:34 PM, wrote: > OK, i will include the printascii function. > Thank you for your patience. I appreciate you. You are welcome. Have you tried "make uImage" =3F --=20 Gilles =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F Xenomai-help mailing list Xenomai-help@domain.hid https://mail.gna.org/listinfo/xenomai-help =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/=3Fmc=3D100071&distributionid=3D000000000066