From: Pavel Roskin <proski@gnu.org>
To: Michael Buesch <mb@bu3sch.de>
Cc: bcm43xx-dev@lists.berlios.de, netdev@vger.kernel.org
Subject: Re: Can someone please try...
Date: Tue, 16 Jan 2007 18:51:59 -0500 [thread overview]
Message-ID: <1168991519.17787.17.camel@dv> (raw)
In-Reply-To: <200701162307.02891.mb@bu3sch.de>
On Tue, 2007-01-16 at 23:07 +0100, Michael Buesch wrote:
> On Tuesday 16 January 2007 22:50, Pavel Roskin wrote:
> > On Tue, 2007-01-16 at 20:23 +0100, Michael Buesch wrote:
> >
> > > A patch for that is already upstream.
> >
> > I don't see it. It's not in your tree yet.
>
> It is on its way upstream to linville.
Well, it's pretty cruel to ask others to test code with known fatal
bugs, IMHO. Even it git were extremely poor at handling a patch applied
in two branches. In fact, git is not so bad at all at handling such
situations.
> > > It's surprising that it doesn't happen for me, though.
> > > Neiter on PPC, nor on i386.
> >
> > It did happen for me on i386, as well as on x86_64. The dump was for
> > x86_64, as evidenced by the register size. Maybe you have less
> > debugging options enabled?
>
> All.
That's commendable. I tried the 32-bit kernel without SMP and with
almost all debugging. One thing I noticed is that scanning ignores the
pure 802.11b AP running HostAP that I was going to use for testing.
Other APs are detected. The association didn't work, probably for that
reason.
Scanning may trigger many assertion failures:
bcm43xx_d80211: ASSERTION FAILED ((lna & ~0x7) == 0)
at: /home/proski/src/linux-2.6/drivers/net/
wireless/d80211/bcm43xx/bcm43xx_lo.c:235:lo_measure_feedthrough()
Finally, interrupting wpa_supplicant hits another bug:
BUG: unable to handle kernel paging request at virtual address c3e2cbf8
printing eip:
e03835e1
*pde = 0000f067
*pte = 03e2c000
Oops: 0002 [#1]
DEBUG_PAGEALLOC
Modules linked in: bcm43xx_d80211 ssb
CPU: 0
EIP: 0060:[<e03835e1>] Not tainted VLI
EFLAGS: 00210282 (2.6.20-rc3 #3)
EIP is at bcm43xx_wireless_core_init+0x5a/0x98e [bcm43xx_d80211]
eax: 00000000 ebx: c3dab740 ecx: 000000e1 edx: c3493808
esi: c34937f8 edi: c3e2cbf8 ebp: c3e60e38 esp: c3e60db8
ds: 007b es: 007b ss: 0068
Process wpa_supplicant (pid: 2942, ti=c3e60000 task=c3f92590 task.ti=c3e60000)
Stack: c0339db6 c0339db6 00000000 c3f92590 c0339db6 00200246 c3e60df0 c3f30000
c3dab740 c0339de4 c3493808 c3e60e0c c3e60e0c 00200246 c3e60e2c c0339dc0
00000000 00000002 c0339de4 c3e60e50 c3f92590 22222222 22222222 22222222
Call Trace:
[<c010335d>] show_trace_log_lvl+0x1a/0x2f
[<c010340d>] show_stack_log_lvl+0x9b/0xa3
[<c01035a6>] show_registers+0x191/0x267
[<c010378f>] die+0x113/0x212
[<c011010a>] do_page_fault+0x43a/0x50c
[<c033b47c>] error_code+0x74/0x7c
[<e03850bc>] bcm43xx_add_interface+0x4f/0xb7 [bcm43xx_d80211]
[<c032022f>] ieee80211_open+0x19d/0x27e
[<c02dbb77>] dev_open+0x2d/0x64
[<c02da71f>] dev_change_flags+0x51/0xf1
[<c030b67a>] devinet_ioctl+0x235/0x53a
[<c030bc38>] inet_ioctl+0x73/0x91
[<c02d1db8>] sock_ioctl+0x1ac/0x1c9
[<c015dd64>] do_ioctl+0x1c/0x51
[<c015df94>] vfs_ioctl+0x1fb/0x212
[<c015dfdc>] sys_ioctl+0x31/0x49
[<c0102cba>] sysenter_past_esp+0x5f/0x99
=======================
Code: 00 80 66 0d ef 8d be 9c 01 00 00 f3 ab 8b 7a 5c 80 62 49 c5 c7 42 4c ff ff ff ff 85 ff c7
42 50 00 00 00 00 74 13 b9 e1 00 00 00 <f3> ab 8b 42 5c 66 c7 80 76 03 00 00 ff ff 8b 4d a8 89 f
0 c7 41
EIP: [<e03835e1>] bcm43xx_wireless_core_init+0x5a/0x98e [bcm43xx_d80211] SS:ESP 0068:c3e60db8
Then I used MadWifi on the AP side, and "iwpriv scan" picked it.
Moreover, wpa_supplicant reported connection! I interrupted
wpa_supplicant and started it again, and then the kernel oopsed again.
Strangely, the driver is not even mentioned in the backtrace.
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
printing eip:
c02d8863
*pde = 00000000
Oops: 0002 [#1]
DEBUG_PAGEALLOC
Modules linked in: bcm43xx_d80211 ssb
CPU: 0
EIP: 0060:[<c02d8863>] Not tainted VLI
EFLAGS: 00210246 (2.6.20-rc3 #3)
EIP is at datagram_poll+0xba/0xc5
eax: 00000000 ebx: cc252bf8 ecx: 00000049 edx: 00000000
esi: 00000002 edi: 00000004 ebp: cb940b70 esp: cb940b68
ds: 007b es: 007b ss: 0068
Process wpa_supplicant (pid: 4344, ti=cb940000 task=c2be0590 task.ti=cb940000)
Stack: c0353220 c9fedf2c cb940b7c c02d1643 00000000 cb940e30 c015ebae c033b3bd
cb940e54 cb940e50 cb940f9c cb940f50 cb940be0 00000000 00000000 cb940e5c
cb940e60 cb940e64 cb940e50 cb940e54 cb940e58 00000070 00000000 00000000
Call Trace:
[<c010335d>] show_trace_log_lvl+0x1a/0x2f
[<c010340d>] show_stack_log_lvl+0x9b/0xa3
[<c01035a6>] show_registers+0x191/0x267
[<c010378f>] die+0x113/0x212
[<c011010a>] do_page_fault+0x43a/0x50c
[<c033b47c>] error_code+0x74/0x7c
[<c02d1643>] sock_poll+0x12/0x15
[<c015ebae>] do_select+0x2b4/0x4cc
[<c015f076>] core_sys_select+0x2b0/0x2d5
[<c015f631>] sys_select+0x99/0x170
[<c0102cba>] sysenter_past_esp+0x5f/0x99
=======================
Code: ca 3c 02 74 2b 8b 83 7c 01 00 00 ba 02 00 00 00 89 d6 99 f7 fe 39 83 cc 00 00 00 7d 08 81
c9 04 03 00 00 eb 0b 8b 83 44 02 00 00 <0f> ba 68 04 00 5b 89 c8 5e 5d c3 55 89 e5 57 56 89 c6 5
3 83 ec
EIP: [<c02d8863>] datagram_poll+0xba/0xc5 SS:ESP 0068:cb940b68
--
Regards,
Pavel Roskin
next prev parent reply other threads:[~2007-01-16 23:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-16 17:06 Can someone please try Michael Buesch
2007-01-16 18:29 ` Pavel Roskin
2007-01-16 19:23 ` Michael Buesch
2007-01-16 21:50 ` Pavel Roskin
2007-01-16 22:07 ` Michael Buesch
2007-01-16 23:51 ` Pavel Roskin [this message]
2007-01-17 9:52 ` Michael Buesch
2007-01-18 9:41 ` Pavel Roskin
2007-01-19 7:54 ` Pavel Roskin
2007-01-22 20:06 ` Michael Buesch
2007-01-22 20:44 ` Pavel Roskin
2007-01-22 21:00 ` Michael Buesch
2007-01-22 22:04 ` Larry Finger
2007-01-23 6:14 ` Pavel Roskin
2007-01-23 9:21 ` Michael Buesch
[not found] ` <200701231021.34995.mb-fseUSCV1ubazQB+pC5nmwQ@public.gmane.org>
2007-01-24 5:43 ` Pavel Roskin
2007-01-24 8:43 ` Michael Buesch
2007-01-16 19:00 ` Andreas Schwab
2007-01-16 19:24 ` Michael Buesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1168991519.17787.17.camel@dv \
--to=proski@gnu.org \
--cc=bcm43xx-dev@lists.berlios.de \
--cc=mb@bu3sch.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.