Re: [PATCH] [7/9] pasemi: Configure DMA controller interrupts

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

On Thu, 2007-02-01 at 22:54 -0600, Olof Johansson wrote:
> plain text document attachment (pasemi-dma-irqs)
> The DMA controller on PWRficient is somewhat special -- has a PCI header
> so it looks like it's on the root PCI (-Express) root bus, but it uses
> more than the default number of interrupts (and they are hardwired).
> 
> We need to wire up all interrupts for the DMA controller. The generic
> IRQ code will only map the primary interrupt from the PCI header (128),
> so add 129->211 by hand.

Or you can have them in the device-tree ... the generic code only maps
PCI IRQ index 0 but nothing prevents your fixup code to map the other
ones.

However, I do wonder what is the point of creating a mapping and nor
storing the resulting virq anywhere ? When are those IRQs actually
used ?

That is the place where the mapping should happen... There is no
guarantee that the resulting virq from irq_create_mapping() will be the
same as the HW irq you passed in (it will in -most- cases with the
current code, but it's a bug to rely on that behaviour). Thus you should
store the result of irq_create_mapping() and use that. I see no
advantage in "pre-mapping" things that way.

Ben.
 
> 
> Signed-off-by: Olof Johansson <olof@lixom.net>
> 
> Index: merge/arch/powerpc/platforms/pasemi/pci.c
> ===================================================================
> --- merge.orig/arch/powerpc/platforms/pasemi/pci.c
> +++ merge/arch/powerpc/platforms/pasemi/pci.c
> @@ -163,6 +163,19 @@ static void __init pas_fixup_phb_resourc
>  }
>  
> 
> +void __devinit pas_pci_irq_fixup(struct pci_dev *dev)
> +{
> +	/* DMA is special, 84 interrupts (128 -> 211), all but 128
> +	 * need to be mapped by hand here.
> +	 */
> +	if (dev->vendor == 0x1959 && dev->device == 0xa007) {
> +		int i;
> +		for (i = 129; i < 212; i++)
> +			irq_create_mapping(NULL, i);
> +	}
> +}
> +
> +
>  void __init pas_pci_init(void)
>  {
>  	struct device_node *np, *root;
> Index: merge/arch/powerpc/platforms/pasemi/setup.c
> ===================================================================
> --- merge.orig/arch/powerpc/platforms/pasemi/setup.c
> +++ merge/arch/powerpc/platforms/pasemi/setup.c
> @@ -242,4 +242,5 @@ define_machine(pas) {
>  	.check_legacy_ioport    = pas_check_legacy_ioport,
>  	.progress		= pas_progress,
>  	.machine_check_exception = pas_machine_check_handler,
> +	.pci_irq_fixup		= pas_pci_irq_fixup,
>  };
> Index: merge/arch/powerpc/platforms/pasemi/pasemi.h
> ===================================================================
> --- merge.orig/arch/powerpc/platforms/pasemi/pasemi.h
> +++ merge/arch/powerpc/platforms/pasemi/pasemi.h
> @@ -3,6 +3,7 @@
>  
>  extern unsigned long pas_get_boot_time(void);
>  extern void pas_pci_init(void);
> +extern void __devinit pas_pci_irq_fixup(struct pci_dev *dev);
>  
>  extern void __init pasemi_idle_init(void);
>  
> 
> --
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev