From: Tobin Davis <gruemaster@email.uophx.edu>
To: alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: Add support for Fujitsu PI1556 Realtek ALC880
Date: Tue, 06 Feb 2007 15:05:21 -0800 [thread overview]
Message-ID: <1170803121.28278.305.camel@localhost> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 243 bytes --]
This patch adds support for the Fujitsu PI1556 laptop.
Issue: Volume knob on system maxes out lower than alsamixer (0x35 vs
0x40). Everything else works, and audio quality is good at 0x35.
Signed off by Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 641 bytes --]
[-- Attachment #2: fujitsu_pi1536.patch.5 --]
[-- Type: text/x-patch, Size: 3395 bytes --]
diff -r a42a457ae20c pci/hda/patch_realtek.c
--- a/pci/hda/patch_realtek.c Mon Feb 05 14:56:20 2007 +0100
+++ b/pci/hda/patch_realtek.c Tue Feb 06 09:53:58 2007 -0800
@@ -52,6 +52,7 @@ enum {
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
ALC880_ASUS_DIG2,
+ ALC880_FUJITSU,
ALC880_UNIWILL_DIG,
ALC880_UNIWILL,
ALC880_UNIWILL_P53,
@@ -1073,6 +1074,20 @@ static struct snd_kcontrol_new alc880_un
{ } /* end */
};
+static struct snd_kcontrol_new alc880_fujitsu_mixer[] = {
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ { } /* end */
+};
+
static struct snd_kcontrol_new alc880_uniwill_p53_mixer[] = {
HDA_CODEC_VOLUME("HPhone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("HPhone Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -1385,6 +1400,11 @@ static struct hda_verb alc880_uniwill_p5
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_DCVOL_EVENT},
+ { }
+};
+
+static struct hda_verb alc880_beep_init_verbs[] = {
+ { 0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5) },
{ }
};
@@ -2357,6 +2377,8 @@ static const char *alc880_models[ALC880_
[ALC880_ASUS_DIG] = "asus-dig",
[ALC880_ASUS_DIG2] = "asus-dig2",
[ALC880_UNIWILL_DIG] = "uniwill",
+ [ALC880_UNIWILL_P53] = "uniwill-p53",
+ [ALC880_FUJITSU] = "fujitsu",
[ALC880_F1734] = "F1734",
[ALC880_LG] = "lg",
[ALC880_LG_LW] = "lg-lw",
@@ -2427,6 +2449,7 @@ static struct snd_pci_quirk alc880_cfg_t
SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG),
SND_PCI_QUIRK(0x1734, 0x10ac, "FSC", ALC880_UNIWILL),
SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734),
+ SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
@@ -2635,7 +2658,21 @@ static struct alc_config_preset alc880_p
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
- .channel_mode = alc880_w810_modes,
+ .channel_mode = alc880_threestack_modes,
+ .input_mux = &alc880_capture_source,
+ .unsol_event = alc880_uniwill_p53_unsol_event,
+ .init_hook = alc880_uniwill_p53_hp_automute,
+ },
+ [ALC880_FUJITSU] = {
+ .mixers = { alc880_fujitsu_mixer,
+ alc880_pcbeep_mixer, },
+ .init_verbs = { alc880_volume_init_verbs,
+ alc880_uniwill_p53_init_verbs,
+ alc880_beep_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc880_dac_nids),
+ .dac_nids = alc880_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
+ .channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
.init_hook = alc880_uniwill_p53_hp_automute,
[-- Attachment #3: Type: text/plain, Size: 374 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #4: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next reply other threads:[~2007-02-06 23:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-06 23:05 Tobin Davis [this message]
2007-02-07 10:45 ` Add support for Fujitsu PI1556 Realtek ALC880 Takashi Iwai
2007-02-07 15:02 ` Tobin Davis
2007-02-07 15:19 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170803121.28278.305.camel@localhost \
--to=gruemaster@email.uophx.edu \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.