From: Daniel Walker <dwalker@mvista.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>, Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org
Subject: Re: 2.6.20-rc6-mm3
Date: Tue, 06 Feb 2007 17:12:41 -0800 [thread overview]
Message-ID: <1170810761.3455.147.camel@dwalker1> (raw)
In-Reply-To: <1170804989.3785.58.camel@chaos>
On Wed, 2007-02-07 at 00:36 +0100, Thomas Gleixner wrote:
> There are no other clock event devices in a PC system at the moment
> and /proc/interrupt does not care, whether the interrupt was setup for a
> clock event device or something else. It displays the name which is
> given in the irqaction struct and does not care what it means. I did not
> change the name in the IRQ#0 setup, so it still displays "timer" (which
> can either be PIT or HPET), but this is something the interrupt layer
> does not know and does not care about.
So your saying the "timer" entry in /proc/interrupts can be either the
HPET timer, the PIT timer? Mine says "IO-APIC-edge" which does that map
to? It's going though the io-apic but it's still the pit ?
Daniel
next prev parent reply other threads:[~2007-02-07 1:12 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-30 4:45 2.6.20-rc6-mm3 Andrew Morton
2007-01-30 4:50 ` 2.6.20-rc6-mm3 Jeff Garzik
2007-01-30 5:11 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30 9:56 ` 2.6.20-rc6-mm3 Evgeniy Polyakov
2007-01-30 8:16 ` 2.6.20-rc6-mm3 Sunil Naidu
2007-01-30 8:32 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30 9:06 ` 2.6.20-rc6-mm3 Olivier Galibert
2007-01-30 9:26 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-30 18:47 ` 2.6.20-rc6-mm3 Olivier Galibert
2007-01-31 7:57 ` 2.6.20-rc6-mm3 Len Brown
2007-02-01 4:25 ` 2.6.20-rc6-mm3 Len Brown
2007-01-30 22:18 ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-01-30 22:27 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31 0:55 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-01-31 13:22 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-01-31 14:25 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-01 8:01 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-01 10:44 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-01 11:12 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-03-01 11:11 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-01 11:12 ` 2.6.20-rc6-mm3 Karsten Wiese
2007-02-03 0:37 ` 2.6.20-rc6-mm3 Pavel Machek
2007-02-01 13:03 ` [PATCH -mm] gtod persistent clock resume fix Thomas Gleixner
2007-01-31 11:54 ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-02-01 4:10 ` 2.6.20-rc6-mm3 Len Brown
2007-02-01 4:10 ` 2.6.20-rc6-mm3 Len Brown
2007-02-01 4:17 ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01 4:17 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31 1:16 ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31 1:25 ` 2.6.20-rc6-mm3 Andrew Morton
2007-01-31 11:38 ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31 12:29 ` 2.6.20-rc6-mm3 Alexey Starikovskiy
2007-01-31 16:02 ` 2.6.20-rc6-mm3 Maciej Rutecki
2007-01-31 18:28 ` 2.6.20-rc6-mm3 Tilman Schmidt
2007-01-31 21:52 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-01-31 23:21 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 19:04 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-01 19:36 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-01 20:01 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-01 21:11 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 22:33 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-02 19:18 ` dynticks + iptables almost stops the boot process [was: Re: 2.6.20-rc6-mm3] Mattia Dongili
2007-02-02 20:27 ` Thomas Gleixner
2007-02-02 20:43 ` Mattia Dongili
2007-02-06 16:48 ` Ingo Molnar
2007-02-06 19:28 ` Mattia Dongili
2007-02-06 23:12 ` Tilman Schmidt
2007-02-06 23:17 ` Thomas Gleixner
2007-02-07 1:01 ` Andrew Morton
2007-02-07 19:33 ` Ingo Molnar
2007-02-01 21:37 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 20:24 ` 2.6.20-rc6-mm3 Mattia Dongili
2007-02-01 0:14 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 0:24 ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01 0:27 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 0:36 ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01 0:38 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 6:20 ` 2.6.20-rc6-mm3 David Chinner
2007-02-01 7:12 ` 2.6.20-rc6-mm3 Andrew Morton
2007-02-01 19:01 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 19:18 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 20:18 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-01 20:26 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 23:02 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-05 12:02 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 12:17 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 12:56 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-05 18:20 ` 2.6.20-rc6-mm3 Christoph Lameter
2007-02-05 18:34 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-02 4:08 ` 2.6.20-rc6-mm3 David Chinner
2007-02-02 7:31 ` 2.6.20-rc6-mm3 Jens Axboe
2007-02-01 18:24 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-01 19:37 ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-01 20:29 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-01 20:38 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-02 14:22 ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 14:47 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-02 14:50 ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 16:04 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-03 7:30 ` 2.6.20-rc6-mm3 Cedric Le Goater
2007-02-03 7:57 ` 2.6.20-rc6-mm3 Starikovskiy, Alexey Y
2007-02-02 17:39 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 16:03 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 18:36 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 18:45 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 19:07 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 19:55 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 20:20 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 20:40 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 20:52 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 20:56 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:09 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:20 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:23 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:41 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 21:54 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 22:08 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 22:42 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 22:56 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:04 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:14 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:22 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:28 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 23:35 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:44 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 23:51 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-07 2:46 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:36 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-07 1:12 ` Daniel Walker [this message]
2007-02-07 14:53 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 23:37 ` 2.6.20-rc6-mm3 Ingo Molnar
2007-02-06 22:13 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:43 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:59 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 21:17 ` 2.6.20-rc6-mm3 Thomas Gleixner
2007-02-06 21:25 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:15 ` 2.6.20-rc6-mm3 Rob Landley
2007-02-06 23:28 ` 2.6.20-rc6-mm3 Daniel Walker
2007-02-06 23:55 ` 2.6.20-rc6-mm3 Rob Landley
2007-02-06 22:11 ` [-mm patch] #ifdef ACPI_FUTURE_USAGE acpi_os_readable() Adrian Bunk
2007-02-06 22:12 ` [RFC: -mm patch] drivers/net/atl1/: possible cleanups Adrian Bunk
2007-02-07 0:19 ` Jay Cliburn
2007-02-07 0:22 ` Jeff Garzik
2007-02-07 0:24 ` J. K. Cliburn
2007-02-07 0:24 ` Adrian Bunk
2007-02-06 22:12 ` [-mm patch] drivers/scsi/aacraid/: cleanups Adrian Bunk
2007-02-06 22:12 ` [Cluster-devel] [-mm patch] make gfs2_writepages() static Adrian Bunk
2007-02-06 22:12 ` Adrian Bunk
2007-02-07 10:50 ` [Cluster-devel] " Steven Whitehouse
2007-02-07 10:50 ` Steven Whitehouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170810761.3455.147.camel@dwalker1 \
--to=dwalker@mvista.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.