All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tobin Davis <tdavis@dsl-only.net>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel <alsa-devel@lists.sourceforge.net>
Subject: Re: Add support for Fujitsu PI1556 Realtek ALC880
Date: Wed, 07 Feb 2007 07:02:29 -0800	[thread overview]
Message-ID: <1170860549.28278.333.camel@localhost> (raw)
In-Reply-To: <s5hps8mutz3.wl%tiwai@suse.de>


[-- Attachment #1.1: Type: text/plain, Size: 633 bytes --]

On Wed, 2007-02-07 at 11:45 +0100, Takashi Iwai wrote:

> At Tue, 06 Feb 2007 15:05:21 -0800,
> Tobin Davis wrote:
> > 
> > This patch adds support for the Fujitsu PI1556 laptop.
> > 
> > Issue:  Volume knob on system maxes out lower than alsamixer (0x35 vs 0x40). 
> > Everything else works, and audio quality is good at 0x35.
> > 
> > Signed off by Tobin Davis <tdavis@dsl-only.net>                                       
> Looks OK, but don't forget to add the new description to
> ALSA-Configuration.txt, too.
> 

Oops.  Here's the patch again with the documentation fix as well.

Signed off by Tobin Davis <tdavis@dsl-only.net>

[-- Attachment #1.2: Type: text/html, Size: 1376 bytes --]

[-- Attachment #2: fujitsu_pi1536.patch.5 --]
[-- Type: text/x-patch, Size: 3884 bytes --]

diff -r a42a457ae20c pci/hda/patch_realtek.c
--- a/pci/hda/patch_realtek.c	Mon Feb 05 14:56:20 2007 +0100
+++ b/pci/hda/patch_realtek.c	Tue Feb 06 09:53:58 2007 -0800
@@ -52,6 +52,7 @@ enum {
 	ALC880_ASUS_DIG,
 	ALC880_ASUS_W1V,
 	ALC880_ASUS_DIG2,
+	ALC880_FUJITSU,
 	ALC880_UNIWILL_DIG,
 	ALC880_UNIWILL,
 	ALC880_UNIWILL_P53,
@@ -1073,6 +1074,20 @@ static struct snd_kcontrol_new alc880_un
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc880_fujitsu_mixer[] = {
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	{ } /* end */
+};
+
 static struct snd_kcontrol_new alc880_uniwill_p53_mixer[] = {
 	HDA_CODEC_VOLUME("HPhone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("HPhone Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -1385,6 +1400,11 @@ static struct hda_verb alc880_uniwill_p5
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
 	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_DCVOL_EVENT},
 
+	{ }
+};
+
+static struct hda_verb alc880_beep_init_verbs[] = {
+	{ 0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5) },
 	{ }
 };
 
@@ -2357,6 +2377,8 @@ static const char *alc880_models[ALC880_
 	[ALC880_ASUS_DIG]	= "asus-dig",
 	[ALC880_ASUS_DIG2]	= "asus-dig2",
 	[ALC880_UNIWILL_DIG]	= "uniwill",
+	[ALC880_UNIWILL_P53]	= "uniwill-p53",
+	[ALC880_FUJITSU]	= "fujitsu",
 	[ALC880_F1734]		= "F1734",
 	[ALC880_LG]		= "lg",
 	[ALC880_LG_LW]		= "lg-lw",
@@ -2427,6 +2449,7 @@ static struct snd_pci_quirk alc880_cfg_t
 	SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG),
 	SND_PCI_QUIRK(0x1734, 0x10ac, "FSC", ALC880_UNIWILL),
 	SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734),
+	SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
 
 	SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
 	SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
@@ -2635,7 +2658,21 @@ static struct alc_config_preset alc880_p
 		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
 		.dac_nids = alc880_asus_dac_nids,
 		.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
-		.channel_mode = alc880_w810_modes,
+		.channel_mode = alc880_threestack_modes,
+		.input_mux = &alc880_capture_source,
+		.unsol_event = alc880_uniwill_p53_unsol_event,
+		.init_hook = alc880_uniwill_p53_hp_automute,
+	},
+	[ALC880_FUJITSU] = {
+		.mixers = { alc880_fujitsu_mixer, 
+			    alc880_pcbeep_mixer, },
+		.init_verbs = { alc880_volume_init_verbs,
+				alc880_uniwill_p53_init_verbs,
+	       			alc880_beep_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
+		.dac_nids = alc880_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
+		.channel_mode = alc880_2_jack_modes,
 		.input_mux = &alc880_capture_source,
 		.unsol_event = alc880_uniwill_p53_unsol_event,
 		.init_hook = alc880_uniwill_p53_hp_automute,
diff -r bc0fda479cc4 Documentation/ALSA-Configuration.txt
--- a/Documentation/ALSA-Configuration.txt	Tue Feb 06 19:18:14 2007 +0100
+++ b/Documentation/ALSA-Configuration.txt	Wed Feb 07 07:00:24 2007 -0800
@@ -785,6 +785,7 @@ Prior to version 0.9.0rc4 options had a 
 	  asus-dig	ASUS with SPDIF out
 	  asus-dig2	ASUS with SPDIF out (using GPIO2)
 	  uniwill	3-jack
+	  fujitsu	Fujitsu Laptops (Pi1536)
 	  F1734		2-jack
 	  lg		LG laptop (m1 express dual)
 	  lg-lw		LG LW20/LW25 laptop

[-- Attachment #3: Type: text/plain, Size: 374 bytes --]

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

[-- Attachment #4: Type: text/plain, Size: 161 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel

  reply	other threads:[~2007-02-07 15:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-06 23:05 Add support for Fujitsu PI1556 Realtek ALC880 Tobin Davis
2007-02-07 10:45 ` Takashi Iwai
2007-02-07 15:02   ` Tobin Davis [this message]
2007-02-07 15:19     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1170860549.28278.333.camel@localhost \
    --to=tdavis@dsl-only.net \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.