Re: Moving from arch/ppc to arch/powerpc with an MPC8248 (part 1)

[Heiko Schocher <hs@denx.de>]

Hello Laurent, Vitaly

>> Are you using up-to-date powerpc.git? I get rid of hardcoded
CPM_MAP_ADDR
>> completely (or it should be such, heh). please make sure you have my recent

I found two more in arch/powerpc/sysdev/cpm2_common.c (in actual powerpc.git Tree):

diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index ec26599..2159895 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -60,7 +60,7 @@ intctl_cpm2_t *cpm2_intctl;
 void
 cpm2_reset(void)
 {
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	cpm2_immr = (cpm2_map_t *) ioremap(get_immrbase(), CPM_MAP_SIZE);
 	cpm2_intctl = cpm2_map(im_intctl);
 
 	/* Reclaim the DP memory for our use.
@@ -234,7 +234,7 @@ static void cpm2_dpinit(void)
 {
 	spin_lock_init(&cpm_dpmem_lock);
 
-	im_dprambase = ioremap(CPM_MAP_ADDR, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+	im_dprambase = (u8 *) ioremap(get_immrbase(), CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
 
 	/* initialize the info header */
 	rh_init(&cpm_dpmem_info, 1,


>> commits in.
>
> I'm using up-to-date linux-2.6.git, which is probably way old compared to 
> powerpc.git :-) What's the powerpc.git URL ? Do you plan to push your changes 
> upstream for 2.6.21 ?

I think you find the powerpc.git at
http://www.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc.git/

Am I right?

I also "playing" at the moment to port a running mpc8272 base port under
arch/ppc to arch/powerpc, but I cant say, when I am finishing it ...

When I compile the Tree I got a compilererror in
drivers/serial/cpm_uart/cpm_uart_cpm2.c, because I have a SMC as a
console. I fixed it with the following patch:

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 787a8f1..5a36ad2 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -285,7 +285,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 int __init cpm_uart_init_portdesc(void)
 {
 #if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
-	u32 addr;
+	u16* addr;
 #endif
 	pr_debug("CPM uart[-]:init portdesc\n");
 

Best regards
Heiko
-- 
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany