From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, alan@lxorguk.ukuu.org.uk, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 09/12] libata: convert ata_pci_init_native_mode() users to new init model
Date: Fri, 9 Mar 2007 20:15:36 +0900 [thread overview]
Message-ID: <11734389362374-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1173438935540-git-send-email-htejun@gmail.com>
Convert drivers which use ata_pci_init_native_mode() to new init
model. ata_pci_init_native_host() is used instead. sata_nv, sata_uli
and sata_sis are in this category.
Tested on nVidia Corporation CK804 Serial ATA Controller [10de:0054]
in both BMDMA and ADMA mode.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/sata_nv.c | 86 +++++++++++++++++++++--------------------------
drivers/ata/sata_sis.c | 49 +++++++++------------------
drivers/ata/sata_uli.c | 62 +++++++++++++---------------------
3 files changed, 79 insertions(+), 118 deletions(-)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index eb0f877..37cbea5 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -368,7 +368,6 @@ static const struct ata_port_operations nv_generic_ops = {
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
- .irq_handler = nv_generic_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -395,7 +394,6 @@ static const struct ata_port_operations nv_nf2_ops = {
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
- .irq_handler = nv_nf2_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -422,7 +420,6 @@ static const struct ata_port_operations nv_ck804_ops = {
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
- .irq_handler = nv_ck804_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -451,7 +448,6 @@ static const struct ata_port_operations nv_adma_ops = {
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
- .irq_handler = nv_adma_interrupt,
.irq_clear = nv_adma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -476,6 +472,7 @@ static struct ata_port_info nv_port_info[] = {
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_generic_ops,
+ .irq_handler = nv_generic_interrupt,
},
/* nforce2/3 */
{
@@ -486,6 +483,7 @@ static struct ata_port_info nv_port_info[] = {
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_nf2_ops,
+ .irq_handler = nv_nf2_interrupt,
},
/* ck804 */
{
@@ -496,6 +494,7 @@ static struct ata_port_info nv_port_info[] = {
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
+ .irq_handler = nv_ck804_interrupt,
},
/* ADMA */
{
@@ -507,6 +506,7 @@ static struct ata_port_info nv_port_info[] = {
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_adma_ops,
+ .irq_handler = nv_adma_interrupt,
},
};
@@ -1068,14 +1068,14 @@ static int nv_adma_port_resume(struct ata_port *ap)
}
#endif
-static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+static void nv_adma_setup_port(struct ata_port *ap)
{
- void __iomem *mmio = probe_ent->iomap[NV_MMIO_BAR];
- struct ata_ioports *ioport = &probe_ent->port[port];
+ void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
+ struct ata_ioports *ioport = &ap->ioaddr;
VPRINTK("ENTER\n");
- mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+ mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE;
ioport->cmd_addr = mmio;
ioport->data_addr = mmio + (ATA_REG_DATA * 4);
@@ -1092,9 +1092,9 @@ static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int por
ioport->ctl_addr = mmio + 0x20;
}
-static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+static int nv_adma_host_init(struct ata_host *host)
{
- struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ struct pci_dev *pdev = to_pci_dev(host->dev);
unsigned int i;
u32 tmp32;
@@ -1109,8 +1109,8 @@ static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
- for (i = 0; i < probe_ent->n_ports; i++)
- nv_adma_setup_port(probe_ent, i);
+ for (i = 0; i < host->n_ports; i++)
+ nv_adma_setup_port(host->ports[i]);
return 0;
}
@@ -1467,14 +1467,13 @@ static void nv_adma_error_handler(struct ata_port *ap)
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
- struct ata_port_info *ppi[2];
- struct ata_probe_ent *probe_ent;
+ const struct ata_port_info *ppi[2];
+ struct ata_host *host;
struct nv_host_priv *hpriv;
int rc;
u32 bar;
void __iomem *base;
unsigned long type = ent->driver_data;
- u64 dma_mask = ATA_DMA_MASK;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
@@ -1490,43 +1489,38 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- pcim_pin_device(pdev);
- return rc;
- }
-
- if(type >= CK804 && adma_enabled) {
+ /* determine type and allocate host */
+ if (type >= CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
type = ADMA;
- dma_mask = DMA_64BIT_MASK;
}
- rc = pci_configure_dma_masks(pdev, dma_mask, NULL);
+ ppi[0] = ppi[1] = &nv_port_info[type];
+ rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
if (rc)
return rc;
- rc = -ENOMEM;
-
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+ hpriv->type = type;
+ host->private_data = hpriv;
- ppi[0] = ppi[1] = &nv_port_info[type];
- probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- if (!probe_ent)
- return -ENOMEM;
-
- if (!pcim_iomap(pdev, NV_MMIO_BAR, 0))
- return -EIO;
- probe_ent->iomap = pcim_iomap_table(pdev);
+ if (type == ADMA) {
+ rc = pci_configure_dma_masks(pdev, DMA_64BIT_MASK, NULL);
+ if (rc)
+ return rc;
+ }
- probe_ent->private_data = hpriv;
- hpriv->type = type;
+ /* request and iomap NV_MMIO_BAR */
+ rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME);
+ if (rc)
+ return rc;
- base = probe_ent->iomap[NV_MMIO_BAR];
- probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
- probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
+ /* configure SCR access */
+ base = host->iomap[NV_MMIO_BAR];
+ host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
+ host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
/* enable SATA space for CK804 */
if (type >= CK804) {
@@ -1537,20 +1531,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
- pci_set_master(pdev);
-
+ /* init ADMA */
if (type == ADMA) {
- rc = nv_adma_host_init(probe_ent);
+ rc = nv_adma_host_init(host);
if (rc)
return rc;
}
- rc = ata_device_add(probe_ent);
- if (rc != NV_PORTS)
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
+ IRQF_SHARED, ppi[0]->sht);
}
static void nv_remove_one (struct pci_dev *pdev)
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 75c5683..d8ee062 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -121,7 +121,6 @@ static const struct ata_port_operations sis_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -131,7 +130,6 @@ static const struct ata_port_operations sis_ops = {
};
static struct ata_port_info sis_port_info = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x7,
@@ -256,12 +254,13 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_probe_ent *probe_ent = NULL;
- int rc;
+ struct ata_port_info pi = sis_port_info;
+ const struct ata_port_info *ppi[2] = { &pi, &pi };
+ struct ata_host *host;
u32 genctl, val;
- struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
u8 pmr;
u8 port2_start = 0x20;
+ int rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -270,16 +269,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- pcim_pin_device(pdev);
- return rc;
- }
-
- rc = pci_configure_dma_masks(pdev, ATA_DMA_MASK, NULL);
- if (rc)
- return rc;
-
/* check and see if the SCRs are in IO space or PCI cfg space */
pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
@@ -346,30 +335,26 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
- probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- if (!probe_ent)
- return -ENOMEM;
+ rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+ if (rc)
+ return rc;
- if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
- void *mmio;
+ if (!(pi.flags & SIS_FLAG_CFGSCR)) {
+ void __iomem *mmio;
- mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
- if (!mmio)
- return -ENOMEM;
+ rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
+ if (rc)
+ return rc;
+ mmio = host->iomap[SIS_SCR_PCI_BAR];
- probe_ent->port[0].scr_addr = mmio;
- probe_ent->port[1].scr_addr = mmio + port2_start;
+ host->ports[0]->ioaddr.scr_addr = mmio;
+ host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
}
pci_set_master(pdev);
pci_intx(pdev, 1);
-
- if (!ata_device_add(probe_ent))
- return -EIO;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
-
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &sis_sht);
}
static int __init sis_init(void)
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index bfdb73e..f74e383 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,7 +115,6 @@ static const struct ata_port_operations uli_ops = {
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -127,7 +126,6 @@ static const struct ata_port_operations uli_ops = {
};
static struct ata_port_info uli_port_info = {
- .sht = &uli_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f, /* pio0-4 */
@@ -185,12 +183,13 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_probe_ent *probe_ent;
- struct ata_port_info *ppi[2];
- int rc;
+ const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
unsigned int board_idx = (unsigned int) ent->driver_data;
+ struct ata_host *host;
struct uli_priv *hpriv;
void __iomem * const *iomap;
+ struct ata_ioports *ioaddr;
+ int n_ports, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -199,51 +198,42 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- pcim_pin_device(pdev);
- return rc;
- }
-
- rc = pci_configure_dma_masks(pdev, ATA_DMA_MASK, NULL);
+ n_ports = 2;
+ if (board_idx == uli_5287)
+ n_ports = 4;
+ rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host);
if (rc)
return rc;
- ppi[0] = ppi[1] = &uli_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- if (!probe_ent)
- return -ENOMEM;
-
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+ host->private_data = hpriv;
- probe_ent->private_data = hpriv;
-
- iomap = pcim_iomap_table(pdev);
+ iomap = host->iomap;
switch (board_idx) {
case uli_5287:
hpriv->scr_cfg_addr[0] = ULI5287_BASE;
hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
- probe_ent->n_ports = 4;
- probe_ent->port[2].cmd_addr = iomap[0] + 8;
- probe_ent->port[2].altstatus_addr =
- probe_ent->port[2].ctl_addr = (void __iomem *)
+ ioaddr = &host->ports[2]->ioaddr;
+ ioaddr->cmd_addr = iomap[0] + 8;
+ ioaddr->altstatus_addr =
+ ioaddr->ctl_addr = (void __iomem *)
((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
- probe_ent->port[2].bmdma_addr = iomap[4] + 16;
+ ioaddr->bmdma_addr = iomap[4] + 16;
hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
+ ata_std_ports(ioaddr);
- probe_ent->port[3].cmd_addr = iomap[2] + 8;
- probe_ent->port[3].altstatus_addr =
- probe_ent->port[3].ctl_addr = (void __iomem *)
+ ioaddr = &host->ports[3]->ioaddr;
+ ioaddr->cmd_addr = iomap[2] + 8;
+ ioaddr->altstatus_addr =
+ ioaddr->ctl_addr = (void __iomem *)
((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
- probe_ent->port[3].bmdma_addr = iomap[4] + 24;
+ ioaddr->bmdma_addr = iomap[4] + 24;
hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
-
- ata_std_ports(&probe_ent->port[2]);
- ata_std_ports(&probe_ent->port[3]);
+ ata_std_ports(ioaddr);
break;
case uli_5289:
@@ -263,12 +253,8 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_intx(pdev, 1);
-
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &uli_sht);
}
static int __init uli_init(void)
--
1.5.0.1
next prev parent reply other threads:[~2007-03-09 11:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-03-09 11:15 [PATCHSET] libata: implement new initialization model, take #3 Tejun Heo
2007-03-09 11:15 ` [PATCH 03/12] libata: separate out ata_host_alloc() and ata_host_attach() Tejun Heo
2007-03-09 15:34 ` Jeff Garzik
2007-03-12 22:25 ` Brian King
2007-03-13 6:06 ` Tejun Heo
2007-03-13 22:34 ` Brian King
2007-03-14 4:48 ` Tejun Heo
2007-03-14 15:25 ` Brian King
2007-03-09 11:15 ` [PATCH 02/12] libata: separate out ata_host_start() Tejun Heo
2007-03-09 11:15 ` [PATCH 05/12] libata: convert legacy PCI host handling to new init model Tejun Heo
2007-03-09 17:46 ` Jeff Garzik
2007-03-09 11:15 ` [PATCH 01/12] libata: allocate ap separately from shost Tejun Heo
2007-03-09 15:00 ` Jeff Garzik
2007-03-09 11:15 ` [PATCH 04/12] libata: implement ata_host_alloc_pinfo() and ata_host_attach() Tejun Heo
2007-03-09 16:08 ` Jeff Garzik
2007-03-09 11:15 ` [PATCH 07/12] libata: add init helpers including ata_pci_prepare_native_host() Tejun Heo
2007-03-09 11:15 ` [PATCH 06/12] libata: convert native PCI host handling to new init model Tejun Heo
2007-03-09 15:45 ` Jeff Garzik
2007-03-09 11:15 ` [PATCH 08/12] libata: convert drivers with combined SATA/PATA ports " Tejun Heo
2007-03-09 12:46 ` Alan Cox
2007-03-09 11:55 ` Jeff Garzik
2007-03-09 13:04 ` Tejun Heo
2007-03-09 11:15 ` [PATCH 12/12] libata: kill probe_ent and related helpers Tejun Heo
2007-03-09 11:15 ` [PATCH 11/12] libata: convert the remaining PATA drivers to new init model Tejun Heo
2007-03-09 12:49 ` Alan Cox
2007-03-09 11:15 ` [PATCH 10/12] libata: convert the remaining SATA " Tejun Heo
2007-03-09 11:15 ` Tejun Heo [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-04-11 6:42 [PATCHSET] libata: implement new initialization model, take #4 Tejun Heo
2007-04-11 6:42 ` [PATCH 09/12] libata: convert ata_pci_init_native_mode() users to new init model Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11734389362374-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.