From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ruben Porras Date: Thu, 15 Mar 2007 08:47:16 +0000 Subject: [LARTC] Problem attaching htb class to a htb qdisc Message-Id: <1173948436.5168.3.camel@localhost> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'm trying to build a QoS system that would divide the outgoing traffic into four categories, each one also subdivided into two more categories. For that I chose a htb root qdisc subdivided into four classes, each of these classes contains also a htb qdisc. Until these point everything goes well, but when I try to attach a new class to the leaf htb qdisc a problem with the sintaxis arises. Code follows: tc qdisc add dev $DEV root handle 1: htb default 30 tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit tc class add dev $DEV parent 1:1 classid 1:20 htb rate ${UPLINK}kbit tc class add dev $DEV parent 1:1 classid 1:30 htb rate ${UPLINK}kbit tc class add dev $DEV parent 1:1 classid 1:40 htb rate ${UPLINK}kbit tc qdisc add dev $DEV parent 1:10 handle 10: htb default 12 tc class add dev $DEV parent 10: classid 1:11 htb rate ${UPLINK}kbit prio 1 RTNETLINK answers: Invalid argument tc class add dev $DEV parent 10: classid 1:12 htb rate ${UPLINK}kbit prio 2 RTNETLINK answers: Invalid argument tc qdisc add dev $DEV parent 1:11 handle 11: sfq perturb 10 tc qdisc add dev $DEV parent 1:12 handle 12: sfq perturb 10 ... If I attach the classes to 1: instead of 10: everything goes well, but I do not understand why I can't attach a class to 10: Any help would be appreciated. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc