All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Kevin Hilman <khilman@mvista.com>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 16/18] ARM: OMAP: 243x: Add mappings for SDRC and SMS
Date: Mon,  9 Apr 2007 17:30:59 -0400	[thread overview]
Message-ID: <11761543231102-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <11761543144181-git-send-email-tony@atomide.com>

From: Kevin Hilman <khilman@mvista.com>

Add mappings for SDRC ans SMS so that omap2_memory_init() works on the
2430.  This also allows the mpurate= command-line option to work.

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c             |   17 ++++++++++++-----
 include/asm-arm/arch-omap/io.h       |    7 +++++++
 include/asm-arm/arch-omap/omap24xx.h |    3 ++-
 3 files changed, 21 insertions(+), 6 deletions(-)

Index: linux-2.6/arch/arm/mach-omap2/io.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/io.c	2007-04-09 15:34:44.000000000 -0400
+++ linux-2.6/arch/arm/mach-omap2/io.c	2007-04-09 15:34:49.000000000 -0400
@@ -55,6 +55,18 @@ static struct map_desc omap2_io_desc[] _
 		.length		= OMAP243X_GPMC_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual	= OMAP243X_SDRC_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS),
+		.length		= OMAP243X_SDRC_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= OMAP243X_SMS_VIRT,
+		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS),
+		.length		= OMAP243X_SMS_SIZE,
+		.type		= MT_DEVICE
+	},
 #endif
 	{
 		.virtual	= DSP_MEM_24XX_VIRT,
@@ -96,11 +108,6 @@ void __init omap2_init_common_hw(void)
 {
 	omap2_mux_init();
 	omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
 	omap2_init_memory();
-#endif
 	gpmc_init();
 }
Index: linux-2.6/include/asm-arm/arch-omap/io.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/io.h	2007-04-09 15:34:44.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/io.h	2007-04-09 15:34:49.000000000 -0400
@@ -80,6 +80,13 @@
 #define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
 #define OMAP243X_GPMC_VIRT	0xFE000000
 #define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP24XX_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
 #endif
 
 #define IO_OFFSET	0x90000000
Index: linux-2.6/include/asm-arm/arch-omap/omap24xx.h
===================================================================
--- linux-2.6.orig/include/asm-arm/arch-omap/omap24xx.h	2007-04-09 15:34:44.000000000 -0400
+++ linux-2.6/include/asm-arm/arch-omap/omap24xx.h	2007-04-09 15:34:49.000000000 -0400
@@ -27,8 +27,9 @@
 #ifdef CONFIG_ARCH_OMAP2430
 #define OMAP24XX_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
 #define OMAP24XX_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP24XX_SDRC_BASE	(0x6D000000)
 #define OMAP242X_CONTROL_STATUS	(L4_24XX_BASE + 0x2f8)
+#define OMAP243X_SMS_BASE	0x6C000000
+#define OMAP24XX_SDRC_BASE	0x6D000000
 #define OMAP243X_GPMC_BASE	0x6E000000
 #endif
 

  reply	other threads:[~2007-04-09 21:39 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-09 21:30 [PATCH 0/18] ARM: OMAP: Updates for OMAP2 common code Tony Lindgren
2007-04-09 21:30 ` [PATCH 1/18] ARM: OMAP2: Place SMS and SDRC into smart idle mode Tony Lindgren
2007-04-09 21:30   ` [PATCH 2/18] ARM: OMAP2: Force APLLs always active Tony Lindgren
2007-04-09 21:30     ` [PATCH 3/18] ARM: OMAP: Enable serial idling and wakeup features Tony Lindgren
2007-04-09 21:30       ` [PATCH 4/18] ARM: OMAP: Optimize INTC register accesses and enable autoidling Tony Lindgren
2007-04-09 21:30         ` [PATCH 5/18] ARM: OMAP: Board Apollon update, fix boot Tony Lindgren
2007-04-09 21:30           ` [PATCH 6/18] ARM: OMAP: omap2/memory.c compile fixes Tony Lindgren
2007-04-09 21:30             ` [PATCH 7/18] ARM: OMAP: 24xx pinmux updates Tony Lindgren
2007-04-09 21:30               ` [PATCH 8/18] ARM: OMAP: omap2/gpmc updates Tony Lindgren
2007-04-09 21:30                 ` [PATCH 9/18] ARM: OMAP: abstract debug card setup (smc, leds) Tony Lindgren
2007-04-09 21:30                   ` [PATCH 10/18] ARM: OMAP: Add minimal OMAP2430 support Tony Lindgren
2007-04-09 21:30                     ` [PATCH 11/18] ARM: OMAP: Tabify mux.c Tony Lindgren
2007-04-09 21:30                       ` [PATCH 12/18] ARM: OMAP: TUSB EVM init Tony Lindgren
2007-04-09 21:30                         ` [PATCH 13/18] ARM: OMAP: Merge gpmc changes from N800 tree Tony Lindgren
2007-04-09 21:30                           ` [PATCH 14/18] ARM: OMAP: Merge driver headers " Tony Lindgren
2007-04-09 21:30                             ` [PATCH 15/18] ARM: OMAP: Merge PM code " Tony Lindgren
2007-04-09 21:30                               ` Tony Lindgren [this message]
2007-04-09 21:31                                 ` [PATCH 17/18] ARM: OMAP: Device init for OMAP24xx Enhanced Audio Controller Tony Lindgren
2007-04-09 21:31                                   ` [PATCH 18/18] ARM: OMAP: Fix PRCM base register usage for 243x Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11761543231102-git-send-email-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=khilman@mvista.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.