From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, alan@lxorguk.ukuu.org.uk,
linux-ide@vger.kernel.org, brking@linux.vnet.ibm.com
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 05/12] libata: convert legacy PCI host handling to new init model
Date: Wed, 11 Apr 2007 15:42:05 +0900 [thread overview]
Message-ID: <11762737253488-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1176273724198-git-send-email-htejun@gmail.com>
Convert legacy PCI host handling to alloc-init-register model.
ata_init_legacy_host(), ata_request_legacy_irqs() and
ata_pci_init_bmdma() are separated out and follow the new init model.
The two legacy handling functions use separate ata_legacy_devres
instead of generic devm_* resources. This reduces devres overhead for
legacy hosts which was a bit high because it didn't use PCI/iomap
merged resoruces.
ata_pci_init_one() is rewritten in terms of the aboved functions but
native mode handling is still using the old method. Conversion will
be completed when native mode handling is updated.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-sff.c | 404 ++++++++++++++++++++++++++++++++++------------
1 files changed, 302 insertions(+), 102 deletions(-)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 93cc967..d48e154 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -627,75 +627,266 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
return probe_ent;
}
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
- struct ata_port_info **port, int port_mask)
+/**
+ * ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ * @host: target ATA host
+ *
+ * Acquire PCI BMDMA resources and initialize @host accordingly.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int ata_pci_init_bmdma(struct ata_host *host)
{
- struct ata_probe_ent *probe_ent;
- void __iomem *iomap[5] = { }, *bmdma;
+ struct device *gdev = host->dev;
+ struct pci_dev *pdev = to_pci_dev(gdev);
+ int i, rc;
- if (port_mask & ATA_PORT_PRIMARY) {
- iomap[0] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CMD, 8);
- iomap[1] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CTL, 1);
- if (!iomap[0] || !iomap[1])
- return NULL;
+ /* TODO: If we get no DMA mask we should fall back to PIO */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+
+ /* request and iomap DMA region */
+ rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+ if (rc) {
+ dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
+ return -ENOMEM;
}
+ host->iomap = pcim_iomap_table(pdev);
- if (port_mask & ATA_PORT_SECONDARY) {
- iomap[2] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CMD, 8);
- iomap[3] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CTL, 1);
- if (!iomap[2] || !iomap[3])
- return NULL;
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ void __iomem *bmdma = host->iomap[4] + 8 * i;
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ioaddr->bmdma_addr = bmdma;
+ if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+ (ioread8(bmdma + 2) & 0x80))
+ host->flags |= ATA_HOST_SIMPLEX;
}
- bmdma = pcim_iomap(pdev, 4, 16); /* may fail */
+ return 0;
+}
- /* alloc and init probe_ent */
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
- if (!probe_ent)
- return NULL;
+struct ata_legacy_devres {
+ unsigned int mask;
+ unsigned long cmd_port[2];
+ void __iomem * cmd_addr[2];
+ void __iomem * ctl_addr[2];
+ unsigned int irq[2];
+ void * irq_dev_id[2];
+};
- probe_ent->n_ports = 2;
- probe_ent->irq_flags = IRQF_SHARED;
+static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
+{
+ int i;
- if (port_mask & ATA_PORT_PRIMARY) {
- probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
- probe_ent->port[0].cmd_addr = iomap[0];
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = iomap[1];
- if (bmdma) {
- probe_ent->port[0].bmdma_addr = bmdma;
- if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
- (ioread8(bmdma + 2) & 0x80))
- probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
- }
- ata_std_ports(&probe_ent->port[0]);
- } else
- probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
+ for (i = 0; i < 2; i++) {
+ if (!legacy_dr->irq[i])
+ continue;
+
+ free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
+ legacy_dr->irq[i] = 0;
+ legacy_dr->irq_dev_id[i] = NULL;
+ }
+}
+
+static void ata_legacy_release(struct device *gdev, void *res)
+{
+ struct ata_legacy_devres *this = res;
+ int i;
+
+ ata_legacy_free_irqs(this);
+
+ for (i = 0; i < 2; i++) {
+ if (this->cmd_addr[i])
+ ioport_unmap(this->cmd_addr[i]);
+ if (this->ctl_addr[i])
+ ioport_unmap(this->ctl_addr[i]);
+ if (this->cmd_port[i])
+ release_region(this->cmd_port[i], 8);
+ }
+}
+
+static int ata_init_legacy_port(struct ata_port *ap,
+ struct ata_legacy_devres *legacy_dr)
+{
+ struct ata_host *host = ap->host;
+ int port_no = ap->port_no;
+ unsigned long cmd_port, ctl_port;
+
+ if (port_no == 0) {
+ cmd_port = ATA_PRIMARY_CMD;
+ ctl_port = ATA_PRIMARY_CTL;
+ } else {
+ cmd_port = ATA_SECONDARY_CMD;
+ ctl_port = ATA_SECONDARY_CTL;
+ }
+
+ /* request cmd_port */
+ if (request_region(cmd_port, 8, "libata"))
+ legacy_dr->cmd_port[port_no] = cmd_port;
+ else {
+ dev_printk(KERN_WARNING, host->dev,
+ "0x%0lX IDE port busy\n", cmd_port);
+ return -EBUSY;
+ }
+
+ /* iomap cmd and ctl ports */
+ legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
+ legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
+ if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no])
+ return -ENOMEM;
+
+ /* init IO addresses */
+ ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
+ ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
+ ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
+ ata_std_ports(&ap->ioaddr);
+
+ return 0;
+}
+
+/**
+ * ata_init_legacy_host - acquire legacy ATA resources and init ATA host
+ * @host: target ATA host
+ * @legacy_mask: out parameter, mask indicating ports is in legacy mode
+ * @was_busy: out parameter, indicates whether any port was busy
+ *
+ * Acquire legacy ATA resources for ports.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int ata_init_legacy_host(struct ata_host *host,
+ unsigned int *legacy_mask, int *was_busy)
+{
+ struct device *gdev = host->dev;
+ struct ata_legacy_devres *legacy_dr;
+ int i, rc;
+
+ if (!devres_open_group(gdev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ rc = -ENOMEM;
+ legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
+ GFP_KERNEL);
+ if (!legacy_dr)
+ goto err_out;
+ devres_add(gdev, legacy_dr);
+
+ for (i = 0; i < 2; i++) {
+ *legacy_mask &= ~(1 << i);
+ rc = ata_init_legacy_port(host->ports[i], legacy_dr);
+ if (rc == 0)
+ legacy_dr->mask |= 1 << i;
+ else if (rc == -EBUSY)
+ (*was_busy)++;
+ }
+
+ if (!legacy_dr->mask)
+ return -EBUSY;
+
+ for (i = 0; i < 2; i++)
+ if (!(legacy_dr->mask & (1 << i)))
+ host->ports[i]->ops = &ata_dummy_port_ops;
- if (port_mask & ATA_PORT_SECONDARY) {
- if (probe_ent->irq)
- probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
+ *legacy_mask |= legacy_dr->mask;
+
+ devres_remove_group(gdev, NULL);
+ return 0;
+
+ err_out:
+ devres_release_group(gdev, NULL);
+ return rc;
+}
+
+/**
+ * ata_request_legacy_irqs - request legacy ATA IRQs
+ * @host: target ATA host
+ * @handler: array of IRQ handlers
+ * @irq_flags: array of IRQ flags
+ * @dev_id: array of IRQ dev_ids
+ *
+ * Request legacy IRQs for non-dummy legacy ports in @host. All
+ * IRQ parameters are passed as array to allow ports to have
+ * separate IRQ handlers.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int ata_request_legacy_irqs(struct ata_host *host,
+ irq_handler_t const *handler,
+ const unsigned int *irq_flags,
+ void * const *dev_id)
+{
+ struct device *gdev = host->dev;
+ struct ata_legacy_devres *legacy_dr;
+ int i, rc;
+
+ legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
+ BUG_ON(!legacy_dr);
+
+ for (i = 0; i < 2; i++) {
+ unsigned int irq;
+
+ /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
+ if (i == 0)
+ irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
else
- probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
- probe_ent->port[1].cmd_addr = iomap[2];
- probe_ent->port[1].altstatus_addr =
- probe_ent->port[1].ctl_addr = iomap[3];
- if (bmdma) {
- probe_ent->port[1].bmdma_addr = bmdma + 8;
- if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
- (ioread8(bmdma + 10) & 0x80))
- probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+ irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
+
+ if (!(legacy_dr->mask & (1 << i)))
+ continue;
+
+ if (!handler[i]) {
+ dev_printk(KERN_ERR, gdev,
+ "NULL handler specified for port %d\n", i);
+ rc = -EINVAL;
+ goto err_out;
}
- ata_std_ports(&probe_ent->port[1]);
- /* FIXME: could be pointing to stack area; must copy */
- probe_ent->pinfo2 = port[1];
- } else
- probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
+ rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
+ dev_id[i]);
+ if (rc) {
+ dev_printk(KERN_ERR, gdev,
+ "irq %u request failed (errno=%d)\n", irq, rc);
+ goto err_out;
+ }
- return probe_ent;
-}
+ /* record irq allocation in legacy_dr */
+ legacy_dr->irq[i] = irq;
+ legacy_dr->irq_dev_id[i] = dev_id[i];
+
+ /* only used to print info */
+ if (i == 0)
+ host->irq = irq;
+ else
+ host->irq2 = irq;
+ }
+
+ return 0;
+ err_out:
+ ata_legacy_free_irqs(legacy_dr);
+ return rc;
+}
/**
* ata_pci_init_one - Initialize/register PCI IDE host controller
@@ -727,7 +918,8 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
{
struct device *dev = &pdev->dev;
struct ata_probe_ent *probe_ent = NULL;
- struct ata_port_info *port[2];
+ struct ata_host *host = NULL;
+ const struct ata_port_info *port[2];
u8 mask;
unsigned int legacy_mode = 0;
int rc;
@@ -783,66 +975,74 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
pcim_pin_device(pdev);
goto err_out;
}
+
+ /* TODO: If we get no DMA mask we should fall back to PIO */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out;
+
+ pci_set_master(pdev);
} else {
- /* Deal with combined mode hack. This side of the logic all
- goes away once the combined mode hack is killed in 2.6.21 */
- if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
- pcim_pin_device(pdev);
- printk(KERN_WARNING "ata: 0x%0X IDE port busy\n",
- ATA_PRIMARY_CMD);
- } else
- legacy_mode |= ATA_PORT_PRIMARY;
+ int was_busy = 0;
+
+ rc = -ENOMEM;
+ host = ata_host_alloc_pinfo(dev, port, 2);
+ if (!host)
+ goto err_out;
- if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
+ rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
+ if (was_busy)
pcim_pin_device(pdev);
- printk(KERN_WARNING "ata: 0x%X IDE port busy\n",
- ATA_SECONDARY_CMD);
- } else
- legacy_mode |= ATA_PORT_SECONDARY;
-
- if (legacy_mode & ATA_PORT_PRIMARY)
- pci_request_region(pdev, 1, DRV_NAME);
- if (legacy_mode & ATA_PORT_SECONDARY)
- pci_request_region(pdev, 3, DRV_NAME);
- /* If there is a DMA resource, allocate it */
- pci_request_region(pdev, 4, DRV_NAME);
- }
+ if (rc)
+ goto err_out;
- /* we have legacy mode, but all ports are unavailable */
- if (legacy_mode == (1 << 3)) {
- rc = -EBUSY;
- goto err_out;
- }
+ /* request respective PCI regions, may fail */
+ rc = pci_request_region(pdev, 1, DRV_NAME);
+ rc = pci_request_region(pdev, 3, DRV_NAME);
- /* TODO: If we get no DMA mask we should fall back to PIO */
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out;
+ /* init bmdma */
+ ata_pci_init_bmdma(host);
+ pci_set_master(pdev);
+ }
if (legacy_mode) {
- probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode);
+ irq_handler_t handler[2] = { host->ops->irq_handler,
+ host->ops->irq_handler };
+ unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
+ void *dev_id[2] = { host, host };
+
+ rc = ata_host_start(host);
+ if (rc)
+ goto err_out;
+
+ rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
+ if (rc)
+ goto err_out;
+
+ rc = ata_host_register(host, port_info[0]->sht);
+ if (rc)
+ goto err_out;
} else {
if (n_ports == 2)
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
else
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
- }
- if (!probe_ent) {
- rc = -ENOMEM;
- goto err_out;
- }
+ probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY);
- pci_set_master(pdev);
+ if (!probe_ent) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
- if (!ata_device_add(probe_ent)) {
- rc = -ENODEV;
- goto err_out;
- }
+ if (!ata_device_add(probe_ent)) {
+ rc = -ENODEV;
+ goto err_out;
+ }
- devm_kfree(dev, probe_ent);
+ devm_kfree(dev, probe_ent);
+ }
devres_remove_group(dev, NULL);
return 0;
--
1.5.0.3
next prev parent reply other threads:[~2007-04-11 6:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-11 6:42 [PATCHSET] libata: implement new initialization model, take #4 Tejun Heo
2007-04-11 6:42 ` [PATCH 03/12] libata: separate out ata_host_alloc() and ata_host_register() Tejun Heo
2007-04-11 6:42 ` [PATCH 02/12] libata: separate out ata_host_start() Tejun Heo
2007-04-11 6:42 ` [PATCH 04/12] libata: implement ata_host_alloc_pinfo() and ata_host_register() Tejun Heo
2007-04-11 6:42 ` [PATCH 01/12] libata: allocate ap separately from shost Tejun Heo
2007-04-11 6:42 ` [PATCH 11/12] libata: convert the remaining PATA drivers to new init model Tejun Heo
2007-04-11 8:22 ` Alan Cox
2007-04-11 8:37 ` [PATCH 11/12 UPDATED] " Tejun Heo
2007-04-11 6:42 ` [PATCH 09/12] libata: convert ata_pci_init_native_mode() users " Tejun Heo
2007-04-11 6:42 ` [PATCH 12/12] libata: kill probe_ent and related helpers Tejun Heo
2007-04-11 6:42 ` [PATCH 06/12] libata: convert native PCI host handling to new init model Tejun Heo
2007-04-11 6:42 ` [PATCH 07/12] libata: add init helpers including ata_pci_prepare_native_host() Tejun Heo
2007-04-11 6:42 ` Tejun Heo [this message]
2007-04-11 6:42 ` [PATCH 10/12] libata: convert the remaining SATA drivers to new init model Tejun Heo
2007-04-11 6:42 ` [PATCH 08/12] libata: convert drivers with combined SATA/PATA ports " Tejun Heo
-- strict thread matches above, loose matches on Subject: below --
2007-03-09 11:15 [PATCHSET] libata: implement new initialization model, take #3 Tejun Heo
2007-03-09 11:15 ` [PATCH 05/12] libata: convert legacy PCI host handling to new init model Tejun Heo
2007-03-09 17:46 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11762737253488-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=brking@linux.vnet.ibm.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.