regression 2.6.22-rc2 suspend to ram broken ( usb_hcd_pci_suspend+0x0/0x170() returns -16 )

[Soeren Sonnenburg <kernel@nn7.de>]

[-- Attachment #1: Type: text/plain, Size: 293 bytes --]

I suddenly can no longer s2ram with 2.6.22-rc2, as this seems caused by
usb_hcd_pci_suspend I am CC'ing linux usb-devel.

I am attaching a dmesg and lspci.

Soeren
-- 
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.

[-- Attachment #2: nosusp --]
[-- Type: text/plain, Size: 28342 bytes --]

Linux version 2.6.22-rc2-sonne (sonne@no) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #12 SMP PREEMPT Mon May 21 10:21:19 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007efce000 (usable)
 BIOS-e820: 000000007efce000 - 000000007f1cf000 (ACPI NVS)
 BIOS-e820: 000000007f1cf000 - 000000007febf000 (ACPI data)
 BIOS-e820: 000000007febf000 - 000000007feef000 (ACPI NVS)
 BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
 BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
1135MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 520142) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   520142
early_node_map[1] active PFN ranges
    0:        0 ->   520142
On node 0 totalpages: 520142
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2271 pages used for memmap
  HighMem zone: 288495 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 APPLE )
ACPI: XSDT 7FEFD120, 0074 (r1 APPLE   Apple00       55       1000013)
ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       55 Loki       5F)
ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE  MacBookP    10001 INTL 20050309)
ACPI: FACS 7FEC1000, 0040
ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ASF! 7FEF7000, 009C (r32 APPLE   Apple00        1 Loki       5F)
ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
ACPI: SSDT 7FEBC000, 064F (r1 APPLE   SataPri     1000 INTL 20050309)
ACPI: SSDT 7FEBB000, 069C (r1 APPLE   SataSec     1000 INTL 20050309)
ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists.  Total pages: 516079
Kernel command line: root=/dev/sda3 resume=/dev/sda5 rw S
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2307.138 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2055424k/2080568k available (2822k kernel code, 23792k reserved, 947k data, 252k init, 1163064k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9d000 - 0xfffff000   ( 392 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04b6000 - 0xc04f5000   ( 252 kB)
      .data : 0xc03c1a0d - 0xc04ae818   ( 947 kB)
      .text : 0xc0100000 - 0xc03c1a0d   (2822 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, Processors=2, Nodes=1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 4332.70 BogoMIPS (lpj=7218720)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU            1600  @ 2.16GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4329.89 BogoMIPS (lpj=7212636)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU            1600  @ 2.16GHz stepping 08
Total of 2 processors activated (8662.59 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=56
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: 98300000-983fffff
  PREFETCH window: 80000000-8fffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: 98200000-982fffff
  PREFETCH window: 98500000-985fffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: 98100000-981fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: 1000-1fff
  MEM window: 94100000-980fffff
  PREFETCH window: 90000000-93ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: 94000000-940fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2000k freed
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
ACPI: SSDT 7FEB9C10, 02AE (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
ACPI: SSDT 7FEB9910, 02C3 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FEB9F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
ACPI: SSDT 7FEB8F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input4
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15
ata1.00: ATAPI, max UDMA/33
Clocksource tsc unstable (delta = -282695906 ns)
ata1.00: configured for UDMA/33
ATA: abnormal status 0x7F on port 0x00010177
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW GWA4080M   AA26 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000140d8 ctl 0x000140f6 bmdma 0x00014020 irq 0
ata4: SATA max UDMA/133 cmd 0x000140d0 ctl 0x000140f2 bmdma 0x00014028 irq 0
ATA: abnormal status 0x7F on port 0x000140df
ATA: abnormal status 0x7F on port 0x000140df
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: ATA-7: ST9120821AS, 7.01, max UDMA/133
ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: configured for UDMA/133
ATA: abnormal status 0x7F on port 0x000140d7
scsi 2:0:1:0: Direct-Access     ATA      ST9120821AS      7.01 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 2:0:1:0: [sda] Attached SCSI disk
sd 2:0:1:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input5
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: HID 05ac:1000 as /class/input/input7
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input8
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2000KiB [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\bdone.
VFS: Mounted root (ext2 filesystem).
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Trying to move old root to /initrd ... okay
Freeing unused kernel memory: 252k freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102 (c) Dave Jones
appletouch Geyser 3 inited.
input: appletouch as /class/input/input9
usbcore: registered new interface driver appletouch
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.14 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:16:cb:9b:35:cc
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
fw_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: STAC922x, Apple subsys_id=106b0200
fw_core: created new fw device fw0 (0 config rom retries)
Adding 2099140k swap on /dev/sda5.  Priority:-1 extents:1 across:2099140k
EXT3 FS on sda3, internal journal
applesmc: Apple MacBook Pro detected:
applesmc:  - Model with accelerometer
applesmc:  - Model with light sensors and backlight
applesmc:  - Model with 12 temperature sensors
applesmc: device has already been initialized (0xe0, 0xf8).
applesmc: device successfully initialized.
applesmc: 2 fans found.
input: applesmc as /class/input/input10
Registered led device: smc:kbd_backlight
applesmc: driver successfully loaded.
coretemp: This driver uses undocumented features of Core CPU. Temperature might be wrong!
fuse init (API version 7.8)
Stopping tasks ... done.
Suspending console(s)
usb_endpoint usbdev4.2_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2
usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2
usb_endpoint usbdev4.2_ep00: PM: suspend 0->2, parent 4-2 already 2
usb 4-2: PM: suspend 2->2, parent usb4 already 2
usb 1-4:1.1: PM: suspend 2->2, parent 1-4 already 2
usb_endpoint usbdev1.3_ep81: PM: suspend 0->2, parent 1-4:1.0 already 2
usb 1-4:1.0: PM: suspend 2->2, parent 1-4 already 2
usb_endpoint usbdev1.3_ep00: PM: suspend 0->2, parent 1-4 already 2
usb 1-4: PM: suspend 2->2, parent usb1 already 2
usb_endpoint usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
usb_endpoint usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
sd 2:0:1:0: [sda] Synchronizing SCSI cache
sd 2:0:1:0: [sda] Stopping disk
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
pci_set_power_state(): 0000:00:1f.1: state=3, current state=5
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x170() returns -16
suspend_device(): pci_device_suspend+0x0/0x60() returns -16
Could not suspend device 0000:00:1d.0: error -16
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing 98405400)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100000, writing 100007)
ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
sd 2:0:1:0: [sda] Starting disk
ATA: abnormal status 0x7F on port 0x00010177
ATA: abnormal status 0x7F on port 0x000140df
ATA: abnormal status 0x7F on port 0x000140df
ATA: abnormal status 0x7F on port 0x000140d7
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
ata3.01: configured for UDMA/133
ata1.00: configured for UDMA/33
sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
usb_endpoint usbdev1.1_ep00: PM: resume from 0, parent usb1 still 2
usb_endpoint usbdev1.1_ep81: PM: resume from 0, parent 1-0:1.0 still 2
usb_endpoint usbdev3.1_ep00: PM: resume from 0, parent usb3 still 2
usb_endpoint usbdev3.1_ep81: PM: resume from 0, parent 3-0:1.0 still 2
usb_endpoint usbdev4.1_ep00: PM: resume from 0, parent usb4 still 2
usb_endpoint usbdev4.1_ep81: PM: resume from 0, parent 4-0:1.0 still 2
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb_endpoint usbdev1.3_ep00: PM: resume from 0, parent 1-4 still 2
usb_endpoint usbdev1.3_ep81: PM: resume from 0, parent 1-4:1.0 still 2
usb_endpoint usbdev4.2_ep00: PM: resume from 0, parent 4-2 still 2
usb_endpoint usbdev4.2_ep83: PM: resume from 0, parent 4-2:1.0 still 2
applesmc: device has already been initialized (0xe0, 0xf8).
Some devices failed to suspend
Restarting tasks ... done.

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:07.0 Performance counters: Intel Corporation Unknown device 27a3 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
03:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
0c:03.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)