From: Bryan Wu <bryan.wu@analog.com>
To: torvalds@linux-foundation.org, akpm@linux-foundation.org,
linux-kernel@vger.kernel.org
Cc: Simon Arlott <simon@fire.lp0.eu>, Bryan Wu <bryan.wu@analog.com>
Subject: [PATCH 03/20] Blackfin arch: spelling fixes
Date: Mon, 28 May 2007 16:37:38 +0800 [thread overview]
Message-ID: <118034147765-git-send-email-bryan.wu@analog.com> (raw)
In-Reply-To: <11803414753217-git-send-email-bryan.wu@analog.com>
From: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
arch/blackfin/kernel/irqchip.c | 2 +-
arch/blackfin/kernel/traps.c | 2 +-
arch/blackfin/mach-bf533/boards/cm_bf533.c | 2 +-
arch/blackfin/mach-bf533/boards/ezkit.c | 2 +-
arch/blackfin/mach-bf533/ints-priority.c | 2 +-
arch/blackfin/mach-bf537/boards/generic_board.c | 2 +-
arch/blackfin/mach-bf537/boards/pnav10.c | 2 +-
arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
arch/blackfin/mach-bf537/ints-priority.c | 2 +-
arch/blackfin/mach-bf561/boards/cm_bf561.c | 4 ++--
arch/blackfin/mach-bf561/ints-priority.c | 2 +-
arch/blackfin/mach-common/ints-priority-dc.c | 2 +-
arch/blackfin/mach-common/ints-priority-sc.c | 2 +-
arch/blackfin/mm/blackfin_sram.c | 6 +++---
14 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index df5bf02..80996a1 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -91,7 +91,7 @@ int show_interrupts(struct seq_file *p, void *v)
}
/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * do_IRQ handles all hardware IRQs. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9932ede..5ab87b0 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -557,7 +557,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
break;
#ifndef CONFIG_DEBUG_HWERR
/* If one of the last few instructions was a STI
- * it is likily that the error occured awhile ago
+ * it is likely that the error occured awhile ago
* and we just noticed
*/
if (x >= 0x0040 && x <= 0x0047 && i <= 0)
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 23a7f60..edd31ce 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf533.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
*
* Created: 2005
* Description: Board description file
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 747298e..0b522d9 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -1,6 +1,6 @@
/*
* File: arch/blackfin/mach-bf533/ezkit.c
- * Based on: Orginal Work
+ * Based on: Original Work
* Author: Aidan Williams <aidan@nicta.com.au>
*
* Created: 2005
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 36a6933..a3e1789 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 9019c0e..fd57e74 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -55,7 +55,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 40d3a1b..8aaf76d 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -59,7 +59,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ba2f875..3a29b4d 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -108,7 +108,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index fd6308e..2dbf3df 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created:
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6824e95..3dc5c04 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf561.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
*
* Created: 2006
* Description: Board description file
@@ -43,7 +43,7 @@
char *bfin_board_name = "Bluetechnix CM BF561";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI perpherals info goes here */
+/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index 89c52ff..86e3b0e 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created:
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index f3cf070..80943bb 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -4,7 +4,7 @@
* Author:
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* 1996 Roman Zippel
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 34b6228..2cfc7d5 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -4,7 +4,7 @@
* Author:
*
* Created: ?
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* 1996 Roman Zippel
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index dd0c650..3c9e635 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -149,7 +149,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
size = (size + 3) & ~3;
/* not use the good method to match the best slot !!! */
- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if ((pfree[i].flag == SRAM_SLT_FREE)
&& (pfree[i].size >= size)) {
@@ -162,7 +162,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
if (i >= count)
return NULL;
- /* updated the NULL memeory slot !!! */
+ /* updated the NULL memory slot !!! */
if (pfree[i].size > size) {
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_NULL) {
@@ -186,7 +186,7 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
int i, index = -1;
void *addr = NULL;
- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
addr = pfree[i].paddr;
--
1.5.2
next prev parent reply other threads:[~2007-05-28 8:37 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-28 8:37 [PATCH 00/20] Blackfin update for 2.6.22-rc3 Bryan Wu
2007-05-28 8:37 ` [PATCH 01/20] Blackfin arch: remove defconfig file Bryan Wu
2007-05-28 8:37 ` [PATCH 02/20] Blackfin arch: DMA code minor naming convention fix Bryan Wu
2007-05-28 8:37 ` Bryan Wu [this message]
2007-05-28 8:37 ` [PATCH 04/20] Blackfin arch: fix bug ad1836 fails to build properly for BF533-EZKIT Bryan Wu
2007-05-28 8:37 ` [PATCH 05/20] Blackfin arch: all symbols were offset by 4k, since we didn't have the __text label Bryan Wu
2007-05-28 8:37 ` [PATCH 06/20] Blackfin arch: mark our memory init functions with __init so they get freed after init Bryan Wu
2007-05-28 8:37 ` [PATCH 07/20] Blackfin arch: implement a basic /proc/sram file for L1 allocation visibility Bryan Wu
2007-05-28 8:37 ` [PATCH 08/20] Blackfin arch: Add header files for BF548 Bryan Wu
2007-05-28 8:37 ` [PATCH 09/20] Blackfin arch: fixup Blackfin MAINTIANERS team member list Bryan Wu
2007-05-28 11:48 ` Pekka Enberg
2007-05-28 14:33 ` Robin Getz
2007-05-28 8:37 ` [PATCH 10/20] Blackfin arch: scrub old console defines Bryan Wu
2007-05-28 8:37 ` [PATCH 11/20] Blackfin arch: update defconfigs Bryan Wu
2007-05-28 8:37 ` [PATCH 12/20] Blackfin arch: unify differences between our diff head.S files -- no functional changes Bryan Wu
2007-05-28 8:37 ` [PATCH 13/20] Blackfin arch: move more of our startup code to .init so it can be freed once we are up and running Bryan Wu
2007-05-28 8:37 ` [PATCH 14/20] Blackfin arch: add proper ENDPROC() Bryan Wu
2007-05-28 8:37 ` [PATCH 15/20] Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR Bryan Wu
2007-05-28 8:37 ` [PATCH 16/20] Blackfin serial driver: ignore framing and parity errors Bryan Wu
2007-05-28 8:37 ` [PATCH 17/20] Blackfin RTC drivers: update MAINTAINERS information Bryan Wu
2007-05-28 8:37 ` [PATCH 18/20] Blackfin SPI driver: tweak spi cleanup function to match newer kernel changes Bryan Wu
2007-05-28 8:37 ` [PATCH 19/20] Blackfin on-chip watchdog driver Bryan Wu
2007-05-29 17:20 ` Mike Frysinger
2007-05-31 20:17 ` Mike Frysinger
2007-05-28 8:37 ` [PATCH 20/20] binfmt_flat: minimum support for the Blackfin relocations Bryan Wu
2007-05-29 20:59 ` [PATCH 00/20] Blackfin update for 2.6.22-rc3 Linus Torvalds
2007-05-29 23:31 ` Bernd Schmidt
2007-05-30 1:04 ` Linus Torvalds
2007-05-30 2:31 ` Bryan Wu
2007-05-30 2:42 ` Andrew Morton
2007-05-30 2:56 ` Bryan Wu
2007-05-30 13:09 ` Robin Getz
2007-05-30 13:30 ` Sam Ravnborg
2007-05-30 13:48 ` Robin Getz
2007-05-30 15:53 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=118034147765-git-send-email-bryan.wu@analog.com \
--to=bryan.wu@analog.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=simon@fire.lp0.eu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.