[PATCH v2]: Fix e500 v2 core reboot bug

[Zang Roy-r61911 <tie-fei.zang@freescale.com>]

Fix the e500 v2 core reset bug.
For e500 v2 core, a new reset control register is added to
reset the core.
On 85xx CDS board with e500 v2 core, normal reboot code will 
induce DDR block in u-boot. This patch fixes this bug. It is 
also tested on legacy e500 v1 core. 


Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---

 arch/powerpc/platforms/85xx/misc.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/misc.c b/arch/powerpc/platforms/85xx/misc.c
index 3e62fcb..886a13f 100644
--- a/arch/powerpc/platforms/85xx/misc.c
+++ b/arch/powerpc/platforms/85xx/misc.c
@@ -13,11 +13,29 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <asm/irq.h>
+#include <asm/io.h>
+#include <sysdev/fsl_soc.h>
+
+static __be32 __iomem *rstcr;
 
 extern void abort(void);
 
+static int __init mpc85xx_rstcr(void)
+{
+	/* map reset control register */
+	rstcr = ioremap(get_immrbase() + 0xE00B0, 0xff);
+	return 0;
+}
+
+arch_initcall(mpc85xx_rstcr);
+
 void mpc85xx_restart(char *cmd)
 {
 	local_irq_disable();
+	if (rstcr)
+		/* set reset control register */
+		out_be32(rstcr, 0x2);	/* HRESET_REQ */
+	else
+		printk (KERN_EMERG "Error: reset control register not mapped, spinning!\n");
 	abort();
 }
-- 
1.5.1