From: Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>
To: acpi devel <linux-acpi@vger.kernel.org>
Subject: scary warnings
Date: Fri, 01 Jun 2007 01:11:28 +0100 [thread overview]
Message-ID: <1180656688.3779.6.camel@monteirov> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1214 bytes --]
I got this messages warnings, I just found it, after had other problems
not related with ACPI, I am been running with this kernels one or two
months ago, and I don't had problems, just reporting the situation,
could be useful anyway.
Thanks,
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
(...)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Warning (tbutils-0158): Incorrect checksum in table [ ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810037cc3b50), AE_BAD_SIGNATURE
ACPI Warning (tbutils-0158): Incorrect checksum in table [ ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810037cc3a50), AE_BAD_SIGNATURE
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
--
Sérgio M.B.
[-- Attachment #1.2: dmesg.txt --]
[-- Type: text/plain, Size: 4038 bytes --]
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
ACPI: RSDP 000F7CA0, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 6000616 MSFT 97)
ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 6000616 MSFT 97)
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
ACPI: DSDT 3FFB0450, 3CD7 (r1 75D8P 75D8P004 4 INTL 2002026)
ACPI: FACS 3FFC0000, 0040
ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 6000616 MSFT 97)
ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 6000616 MSFT 97)
ACPI: OEMB 3FFC0040, 0046 (r1 A M I AMI_OEM 6000616 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: Core revision 20070126
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
ACPI Warning (tbutils-0158): Incorrect checksum in table [ \x05ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ \x05ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810037cc3b50), AE_BAD_SIGNATURE
ACPI Warning (tbutils-0158): Incorrect checksum in table [ \x05ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ \x05ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810037cc3a50), AE_BAD_SIGNATURE
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2192 bytes --]
next reply other threads:[~2007-06-01 0:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-01 0:11 Sergio Monteiro Basto [this message]
2007-06-01 0:55 ` scary warnings Len Brown
2007-06-06 2:10 ` Sergio Monteiro Basto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1180656688.3779.6.camel@monteirov \
--to=sergio@sergiomb.no-ip.org \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.