From: Jeff Gustafson <jeffgus@zimage.com>
To: linux-ide@vger.kernel.org
Subject: SiI 3124 bus reset issues
Date: Tue, 19 Jun 2007 16:16:20 -0700 [thread overview]
Message-ID: <1182294980.7072.31.camel@sally> (raw)
Hi all,
I found issue similar to the one I am having in the archive on this
list. I never found a resolution to the problem in the archive.
I have a 4-port Sil 3124 64-bit PCI-X card in a Dell PowerEdge 750. It
is connected to four SATA hard drives in an external drive bay that
provides power and hotswap rails.
There doesn't seem to be a problem running three drives, but as soon as
I do something with a forth drive all hell breaks loose. The problem
doesn't seem localized to a slot in the drive bay or a particular drive.
The issue seems to only happen when I try to access a forth drive.
I have also tried the card in another system (in a 32-bit slot) and I
experience the same problem.
/proc/interrupts
CPU0 CPU1
0: 250 1 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
6: 2 0 IO-APIC-edge floppy
8: 1 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
14: 4002 0 IO-APIC-edge libata
15: 5192 0 IO-APIC-edge libata
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb1
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
18: 0 0 IO-APIC-fasteoi ehci_hcd:usb3
20: 0 0 IO-APIC-fasteoi libata
21: 0 0 IO-APIC-fasteoi __tmp1014268147
22: 8737 0 IO-APIC-fasteoi eth0
23: 1434 0 IO-APIC-fasteoi eth1
NMI: 0 0
LOC: 45044 36735
ERR: 0
MIS: 0
Jun 12 13:10:06 silo2 kernel: ata3: waiting for device to spin up (8
secs)
Jun 12 13:10:15 silo2 kernel: ata3: soft resetting port
Jun 12 13:10:15 silo2 kernel: ata3: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Jun 12 13:10:15 silo2 kernel: ata3.00: ata_hpa_resize 1: sectors =
781422768, hpa_sectors = 781422768
Jun 12 13:10:15 silo2 kernel: ata3.00: ata_hpa_resize 1: sectors =
781422768, hpa_sectors = 781422768
Jun 12 13:10:15 silo2 kernel: ata3.00: configured for UDMA/100
Jun 12 13:10:15 silo2 kernel: ata3: EH complete
Jun 12 13:10:15 silo2 kernel: SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Jun 12 13:10:15 silo2 kernel: sde: Write Protect is off
Jun 12 13:10:15 silo2 kernel: SCSI device sde: write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Jun 12 13:10:15 silo2 kernel: ata3.00: exception Emask 0x10 SAct 0x9ff
SErr 0x80000 action 0x2 frozen
Jun 12 13:10:15 silo2 kernel: ata3.00: (irq_stat 0x01100010, PHY RDY
changed)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/08:00:00:1c:00/00:00:00:00:00/40 tag 0 cdb 0x0 data 4096 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/e0:08:08:1c:00/00:00:00:00:00/40 tag 1 cdb 0x0 data 114688 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/c8:10:38:19:00/00:00:00:00:00/40 tag 2 cdb 0x0 data 102400 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/10:18:e8:1c:00/00:00:00:00:00/40 tag 3 cdb 0x0 data 8192 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/20:20:f8:1c:00/00:00:00:00:00/40 tag 4 cdb 0x0 data 16384 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/c8:28:00:1a:00/00:00:00:00:00/40 tag 5 cdb 0x0 data 102400 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/38:30:c8:1a:00/00:00:00:00:00/40 tag 6 cdb 0x0 data 28672 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/00:38:00:1b:00/01:00:00:00:00/40 tag 7 cdb 0x0 data 131072 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/48:40:18:1d:00/00:00:00:00:00/40 tag 8 cdb 0x0 data 36864 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3.00: cmd
61/08:58:30:19:00/00:00:00:00:00/40 tag 11 cdb 0x0 data 4096 out
Jun 12 13:10:15 silo2 kernel: res
50/00:00:af:90:93/00:00:2e:00:00/e0 Emask 0x10 (ATA bus error)
Jun 12 13:10:15 silo2 kernel: ata3: waiting for device to spin up (8
secs)
Jun 12 13:10:24 silo2 kernel: ata3: soft resetting port
Jun 12 13:10:24 silo2 kernel: ata3: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Jun 12 13:10:24 silo2 kernel: ata3.00: ata_hpa_resize 1: sectors =
781422768, hpa_sectors = 781422768
Jun 12 13:10:24 silo2 kernel: ata3.00: ata_hpa_resize 1: sectors =
781422768, hpa_sectors = 781422768
Jun 12 13:10:24 silo2 kernel: ata3.00: configured for UDMA/100
Jun 12 13:10:24 silo2 kernel: ata3: EH complete
Jun 12 13:10:24 silo2 kernel: SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
next reply other threads:[~2007-06-19 23:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-19 23:16 Jeff Gustafson [this message]
2007-07-03 6:58 ` SiI 3124 bus reset issues Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1182294980.7072.31.camel@sally \
--to=jeffgus@zimage.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.