All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Clemens Ladisch" <cladisch@fastmail.net>
To: Nathan Allen Stratton <nathan@robotics.net>, alsa-devel@alsa-project.org
Subject: Re: Osprey 440 almost supported!!! Need X9221 i2c support!
Date: Fri, 22 Jun 2007 10:51:31 +0200	[thread overview]
Message-ID: <1182502291.5842.1196490029@webmail.messagingengine.com> (raw)
In-Reply-To: <Pine.LNX.4.58.0706212241460.15772@barney.robotics.net>

Nathan Allen Stratton wrote:
> [...]
> So the issue now is that the audio is WAY to high so it is very distorted.
> The audio is controlled via X9221A chips on the i2c bus at 0x50, there are
> not drivers for X9221 so I can't lower the audio levels.

There is a datasheet for these chips, so writing some code for this
should be easy.  However, the I2C controller is not managed by the
snd-bt87x driver but by the bttv driver.


Regards,
Clemens

  reply	other threads:[~2007-06-22  8:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-06-22  2:41 Osprey 440 almost supported!!! Need X9221 i2c support! Nathan Allen Stratton
2007-06-22  8:51 ` Clemens Ladisch [this message]
2007-06-22 15:10   ` Nathan Allen Stratton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1182502291.5842.1196490029@webmail.messagingengine.com \
    --to=cladisch@fastmail.net \
    --cc=alsa-devel@alsa-project.org \
    --cc=nathan@robotics.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.