From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org, Forrest Zhao <forrest.zhao@gmail.com>
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 05/21] ahci: separate out ahci_exec_polled_cmd()
Date: Mon, 16 Jul 2007 14:29:39 +0900 [thread overview]
Message-ID: <11845637793463-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11845637782629-git-send-email-htejun@gmail.com>
Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will
be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd()
performs reset_engine before returning if the command fails (times
out). This is to improve robustness.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 54 +++++++++++++++++++++++++++++++--------------------
1 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1be238d..db65f4a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -993,17 +993,42 @@ static int ahci_kick_engine(struct ata_port *ap, int force_restart)
return rc;
}
-static int ahci_softreset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
+ struct ata_taskfile *tf, int is_cmd, u16 flags,
+ unsigned long timeout_msec)
{
+ const u32 cmd_fis_len = 5; /* five dwords */
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
- const u32 cmd_fis_len = 5; /* five dwords */
+ u8 *fis = pp->cmd_tbl;
+ u32 tmp;
+
+ /* prep the command */
+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
+
+ /* issue & wait */
+ writel(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (timeout_msec) {
+ tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
+ 1, timeout_msec);
+ if (tmp & 0x1) {
+ ahci_kick_engine(ap, 1);
+ return -EBUSY;
+ }
+ } else
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
+}
+
+static int ahci_softreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
+{
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
- u32 tmp;
- u8 *fis;
int rc;
DPRINTK("ENTER\n");
@@ -1021,7 +1046,6 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class,
"failed to reset engine (errno=%d)", rc);
ata_tf_init(ap->device, &tf);
- fis = pp->cmd_tbl;
/* issue the first D2H Register FIS */
msecs = 0;
@@ -1029,16 +1053,9 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class,
if (time_after(now, deadline))
msecs = jiffies_to_msecs(deadline - now);
- ahci_fill_cmd_slot(pp, 0,
- cmd_fis_len | AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY);
-
tf.ctl |= ATA_SRST;
- ata_tf_to_fis(&tf, 0, 0, fis);
-
- writel(1, port_mmio + PORT_CMD_ISSUE);
-
- tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, 1, msecs);
- if (tmp & 0x1) {
+ if (ahci_exec_polled_cmd(ap, 0, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
rc = -EIO;
reason = "1st FIS failed";
goto fail;
@@ -1048,13 +1065,8 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class,
msleep(1);
/* issue the second D2H Register FIS */
- ahci_fill_cmd_slot(pp, 0, cmd_fis_len);
-
tf.ctl &= ~ATA_SRST;
- ata_tf_to_fis(&tf, 0, 0, fis);
-
- writel(1, port_mmio + PORT_CMD_ISSUE);
- readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+ ahci_exec_polled_cmd(ap, 0, &tf, 0, 0, 0);
/* spec mandates ">= 2ms" before checking status.
* We wait 150ms, because that was the magic delay used for
--
1.5.0.3
next prev parent reply other threads:[~2007-07-16 5:29 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-16 5:29 [PATCHSET 1/4] libata: misc updates in preparation of PMP support, take #2 Tejun Heo
2007-07-16 5:29 ` [PATCH 01/21] ahci: build fix for !CONFIG_PM Tejun Heo
2007-07-16 5:29 ` [PATCH 03/21] ahci: use deadline instead of fixed timeout for 1st FIS for SRST Tejun Heo
2007-07-16 5:29 ` [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis() Tejun Heo
2007-07-20 11:56 ` Jeff Garzik
2007-07-20 12:02 ` Jeff Garzik
2007-07-20 12:18 ` Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 06/21] ahci: separate out ahci_do_softreset() Tejun Heo
2007-07-16 5:29 ` [PATCH 09/21] sata_sil24: separate out sil24_do_softreset() Tejun Heo
2007-07-16 5:29 ` Tejun Heo [this message]
2007-07-16 5:29 ` [PATCH 08/21] sata_sil24: separate out sil24_exec_polled_cmd() Tejun Heo
2007-07-16 5:29 ` [PATCH 07/21] sata_sil24: replace sil24_update_tf() with sil24_read_tf() Tejun Heo
2007-07-16 5:29 ` [PATCH 10/21] libata: improve EH report formatting Tejun Heo
2007-07-16 5:29 ` [PATCH 04/21] ahci: separate out ahci_kick_engine() Tejun Heo
2007-07-16 5:29 ` [PATCH 12/21] libata: make ->scr_read/write callbacks return error code Tejun Heo
2007-07-20 11:58 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 18/21] libata: reorganize ata_ehi_hotplugged() Tejun Heo
2007-07-16 5:29 ` [PATCH 15/21] libata: improve SATA PHY speed down logic Tejun Heo
2007-07-20 12:20 ` Jeff Garzik
2007-07-16 5:29 ` [PATCH 14/21] ahci: implement SCR_NOTIFICATION r/w Tejun Heo
2007-07-16 5:29 ` [PATCH 17/21] libata: improve SCSI scan failure handling Tejun Heo
2007-07-20 12:26 ` Jeff Garzik
2007-07-20 12:28 ` Tejun Heo
2007-07-16 5:29 ` [PATCH 16/21] libata: quickly trigger SATA SPD down after debouncing failed Tejun Heo
2007-07-16 5:29 ` [PATCH 11/21] libata: implement AC_ERR_NCQ Tejun Heo
2007-07-16 5:29 ` [PATCH 13/21] ahci: make NO_NCQ handling more consistent Tejun Heo
2007-07-16 5:29 ` [PATCH 20/21] libata: schedule probing after SError access failure during autopsy Tejun Heo
2007-07-16 5:29 ` [PATCH 19/21] libata: clear HOTPLUG flag after a reset Tejun Heo
2007-07-16 5:29 ` [PATCH 21/21] libata: implement EH fast drain Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11845637793463-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=forrest.zhao@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.