All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Mark M. Hoffman" <mhoffman@lightlink.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH] hwmon: (w83627ehf) read fan_div values during
Date: Sun, 12 Aug 2007 18:47:30 +0000	[thread overview]
Message-ID: <11869444522773-git-send-email-mhoffman@lightlink.com> (raw)

From: Mark M. Hoffman <mhoffman@lightlink.com>

This patch forces the driver to read the fan divider values during early init.
Otherwise, a call to store_fan_min() could access uninitialized variables.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/w83627ehf.c |   48 +++++++++++++++++++++++++++-----------------
 1 files changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index c51ae2e..bca7fbc 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -421,6 +421,31 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
 	}
 }
 
+static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
+{
+	int i;
+
+	i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+	data->fan_div[0] = (i >> 4) & 0x03;
+	data->fan_div[1] = (i >> 6) & 0x03;
+	i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
+	data->fan_div[2] = (i >> 6) & 0x03;
+	i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
+	data->fan_div[0] |= (i >> 3) & 0x04;
+	data->fan_div[1] |= (i >> 4) & 0x04;
+	data->fan_div[2] |= (i >> 5) & 0x04;
+	if (data->has_fan & ((1 << 3) | (1 << 4))) {
+		i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+		data->fan_div[3] = i & 0x03;
+		data->fan_div[4] = ((i >> 2) & 0x03)
+				 | ((i >> 5) & 0x04);
+	}
+	if (data->has_fan & (1 << 3)) {
+		i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
+		data->fan_div[3] |= (i >> 5) & 0x04;
+	}
+}
+
 static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
@@ -432,25 +457,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 	if (time_after(jiffies, data->last_updated + HZ + HZ/2)
 	 || !data->valid) {
 		/* Fan clock dividers */
-		i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = (i >> 6) & 0x03;
-		i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
-		data->fan_div[2] = (i >> 6) & 0x03;
-		i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
-		data->fan_div[0] |= (i >> 3) & 0x04;
-		data->fan_div[1] |= (i >> 4) & 0x04;
-		data->fan_div[2] |= (i >> 5) & 0x04;
-		if (data->has_fan & ((1 << 3) | (1 << 4))) {
-			i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
-			data->fan_div[3] = i & 0x03;
-			data->fan_div[4] = ((i >> 2) & 0x03)
-					 | ((i >> 5) & 0x04);
-		}
-		if (data->has_fan & (1 << 3)) {
-			i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
-			data->fan_div[3] |= (i >> 5) & 0x04;
-		}
+		w83627ehf_update_fan_div(data);
 
 		/* Measured voltages and limits */
 		for (i = 0; i < data->in_num; i++) {
@@ -1312,6 +1319,9 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	if (!(i & (1 << 1)) && (!fan5pin))
 		data->has_fan |= (1 << 4);
 
+	/* Read fan clock dividers immediately */
+	w83627ehf_update_fan_div(data);
+
 	/* Register sysfs hooks */
   	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
 		if ((err = device_create_file(dev,
-- 
1.5.2.2


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

                 reply	other threads:[~2007-08-12 18:47 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11869444522773-git-send-email-mhoffman@lightlink.com \
    --to=mhoffman@lightlink.com \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.