From: Tony Lindgren <tony@atomide.com>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH 4/8] musb_hdrc: Search and replace MGC_END0_FIFOSIZE with MUSB_EP0_FIFOSIZE, remove MGC_MAX_USB_ENDS
Date: Wed, 15 Aug 2007 07:21:41 -0700 [thread overview]
Message-ID: <11871877193281-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1187187715940-git-send-email-tony@atomide.com>
Search and replace MGC_END0_FIFOSIZE with MUSB_EP0_FIFOSIZE, remove MGC_MAX_USB_ENDS
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/usb/musb/g_ep0.c | 2 +-
drivers/usb/musb/musbdefs.h | 2 +-
drivers/usb/musb/musbhdrc.h | 4 +---
drivers/usb/musb/plat_uds.c | 4 ++--
4 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/musb/g_ep0.c b/drivers/usb/musb/g_ep0.c
index 1fa0cad..9585d00 100644
--- a/drivers/usb/musb/g_ep0.c
+++ b/drivers/usb/musb/g_ep0.c
@@ -497,7 +497,7 @@ static void ep0_txstate(struct musb *musb)
/* load the data */
pFifoSource = (u8 *) request->buf + request->actual;
- fifo_count = min((unsigned) MGC_END0_FIFOSIZE,
+ fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
request->length - request->actual);
musb_write_fifo(&musb->endpoints[0], fifo_count, pFifoSource);
request->actual += fifo_count;
diff --git a/drivers/usb/musb/musbdefs.h b/drivers/usb/musb/musbdefs.h
index 25dce14..5ce0505 100644
--- a/drivers/usb/musb/musbdefs.h
+++ b/drivers/usb/musb/musbdefs.h
@@ -175,7 +175,7 @@ static inline void musb_host_rx(struct musb *m, u8 e) {}
#endif
#ifndef MUSB_MAX_END0_PACKET
-#define MUSB_MAX_END0_PACKET ((u16)MGC_END0_FIFOSIZE)
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
#endif
/* host side ep0 states */
diff --git a/drivers/usb/musb/musbhdrc.h b/drivers/usb/musb/musbhdrc.h
index d26910f..225fac9 100644
--- a/drivers/usb/musb/musbhdrc.h
+++ b/drivers/usb/musb/musbhdrc.h
@@ -38,9 +38,7 @@
* HDRC-specific definitions
*/
-#define MGC_MAX_USB_ENDS 16
-
-#define MGC_END0_FIFOSIZE 64 /* this is non-configurable */
+#define MUSB_EP0_FIFOSIZE 64 /* this is non-configurable */
/*
* MUSBMHDRC Register map
diff --git a/drivers/usb/musb/plat_uds.c b/drivers/usb/musb/plat_uds.c
index 7b516ad..71e89d8 100644
--- a/drivers/usb/musb/plat_uds.c
+++ b/drivers/usb/musb/plat_uds.c
@@ -1335,8 +1335,8 @@ static int __init musb_core_init(u16 wType, struct musb *musb)
musb_driver_name, type, aRevision, aDate);
/* configure ep0 */
- musb->endpoints[0].max_packet_sz_tx = MGC_END0_FIFOSIZE;
- musb->endpoints[0].max_packet_sz_rx = MGC_END0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
/* discover endpoint configuration */
musb->nr_endpoints = 1;
--
1.5.2.3
next prev parent reply other threads:[~2007-08-15 14:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-15 14:21 [PATCH 0/8] musb_hdrc: Series of patches to clean-up musbhdrc.h Tony Lindgren
2007-08-15 14:21 ` [PATCH 1/8] musb_hdrc: Search and replace MGC_O_HDRC_ with MUSB_ Tony Lindgren
2007-08-15 14:21 ` [PATCH 2/8] musb_hdrc: Search and replace MGC_M_ " Tony Lindgren
2007-08-15 14:21 ` [PATCH 3/8] musb_hdrc: Search and replace MGC_S_XXX with MUSB_XXX_SHIFT Tony Lindgren
2007-08-15 14:21 ` Tony Lindgren [this message]
2007-08-15 14:21 ` [PATCH 5/8] musb_hdrc: Search and replace _bOffset with _offset Tony Lindgren
2007-08-15 14:21 ` [PATCH 6/8] musb_hdrc: Search and replace MGC_XXX_OFFSET with MUSB_XXX_OFFSET Tony Lindgren
2007-08-15 14:21 ` [PATCH 7/8] musb_hdrc: Remove old unsed MGC_TYPE_SPEED_XXX Tony Lindgren
2007-08-15 14:21 ` [PATCH 8/8] musb_hdrc: Tabify and clean-up musbhdrc.h Tony Lindgren
2007-08-15 16:20 ` David Brownell
2007-08-16 6:46 ` [PATCH] musb_hdrc: Add Nokia Copyright, Make GPLv2 text generic (Was: [PATCH 8/8] musb_hdrc: Tabify and clean-up musbhdrc.h) Tony Lindgren
2007-08-16 7:50 ` David Brownell
2007-08-16 9:13 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11871877193281-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.