All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 02/22] [POWERPC] 85xx: Renamed mpc8544_ds.c to mpc85xx_ds.c
Date: Thu, 13 Sep 2007 16:07:40 -0500	[thread overview]
Message-ID: <1189717683471-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1189717681533-git-send-email-galak@kernel.crashing.org>

Renamed the mpc8544_ds.c board code to mpc85xx_ds.c to make it more
generic in prep for other boards based on the same platform.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mpc8544_ds_defconfig |    2 +-
 arch/powerpc/platforms/85xx/Kconfig       |    8 +-
 arch/powerpc/platforms/85xx/Makefile      |    2 +-
 arch/powerpc/platforms/85xx/mpc8544_ds.c  |  188 -----------------------------
 arch/powerpc/platforms/85xx/mpc85xx_ds.c  |  188 +++++++++++++++++++++++++++++
 5 files changed, 194 insertions(+), 194 deletions(-)
 delete mode 100644 arch/powerpc/platforms/85xx/mpc8544_ds.c
 create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_ds.c

diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index 86582ae..150221f 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -136,7 +136,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8544_DS=y
+CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx=y
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f620171..b8476b2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -29,13 +29,13 @@ config MPC85xx_MDS
 	help
 	  This option enables support for the MPC85xx MDS board
 
-config MPC8544_DS
-	bool "Freescale MPC8544 DS"
+config MPC85xx_DS
+	bool "Freescale MPC85xx DS"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
 	select FSL_ULI1575
 	help
-	  This option enables support for the MPC8544 DS board
+	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
 endchoice
 
@@ -58,4 +58,4 @@ config MPC85xx
 	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
-		|| MPC85xx_MDS || MPC8544_DS
+		|| MPC85xx_MDS || MPC85xx_DS
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index d70f2d0..25bd9e2 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,5 +5,5 @@ obj-$(CONFIG_PPC_85xx)	+= misc.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
-obj-$(CONFIG_MPC8544_DS)  += mpc8544_ds.o
+obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
deleted file mode 100644
index 48983bc..0000000
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * MPC8544 DS Board Setup
- *
- * Author Xianghua Xiao (x.xiao@freescale.com)
- * Roy Zang <tie-fei.zang@freescale.com>
- * 	- Add PCI/PCI Exprees support
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <asm/i8259.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include "mpc85xx.h"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
-#else
-#define DBG(fmt, args...)
-#endif
-
-#ifdef CONFIG_PPC_I8259
-static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int cascade_irq = i8259_irq();
-
-	if (cascade_irq != NO_IRQ) {
-		generic_handle_irq(cascade_irq);
-	}
-	desc->chip->eoi(irq);
-}
-#endif	/* CONFIG_PPC_I8259 */
-
-void __init mpc8544_ds_pic_init(void)
-{
-	struct mpic *mpic;
-	struct resource r;
-	struct device_node *np = NULL;
-#ifdef CONFIG_PPC_I8259
-	struct device_node *cascade_node = NULL;
-	int cascade_irq;
-#endif
-
-	np = of_find_node_by_type(np, "open-pic");
-
-	if (np == NULL) {
-		printk(KERN_ERR "Could not find open-pic node\n");
-		return;
-	}
-
-	if (of_address_to_resource(np, 0, &r)) {
-		printk(KERN_ERR "Failed to map mpic register space\n");
-		of_node_put(np);
-		return;
-	}
-
-	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " OpenPIC  ");
-	BUG_ON(mpic == NULL);
-
-	mpic_init(mpic);
-
-#ifdef CONFIG_PPC_I8259
-	/* Initialize the i8259 controller */
-	for_each_node_by_type(np, "interrupt-controller")
-	    if (of_device_is_compatible(np, "chrp,iic")) {
-		cascade_node = np;
-		break;
-	}
-
-	if (cascade_node == NULL) {
-		printk(KERN_DEBUG "Could not find i8259 PIC\n");
-		return;
-	}
-
-	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
-		printk(KERN_ERR "Failed to map cascade interrupt\n");
-		return;
-	}
-
-	DBG("mpc8544ds: cascade mapped to irq %d\n", cascade_irq);
-
-	i8259_init(cascade_node, 0);
-	of_node_put(cascade_node);
-
-	set_irq_chained_handler(cascade_irq, mpc8544_8259_cascade);
-#endif	/* CONFIG_PPC_I8259 */
-}
-
-#ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
-extern int uli_exclude_device(struct pci_controller *hose,
-				u_char bus, u_char devfn);
-
-static int mpc85xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	struct device_node* node;	
-	struct resource rsrc;
-
-	node = (struct device_node *)hose->arch_data;
-	of_address_to_resource(node, 0, &rsrc);
-
-	if ((rsrc.start & 0xfffff) == 0xb000) {
-		return uli_exclude_device(hose, bus, devfn);
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-#endif	/* CONFIG_PCI */
-
-/*
- * Setup the architecture
- */
-static void __init mpc8544_ds_setup_arch(void)
-{
-#ifdef CONFIG_PCI
-	struct device_node *np;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc8544_ds_setup_arch()", 0);
-
-#ifdef CONFIG_PCI
-	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
-		struct resource rsrc;
-		of_address_to_resource(np, 0, &rsrc);
-		if ((rsrc.start & 0xfffff) == 0xb000)
-			fsl_add_bridge(np, 1);
-		else
-			fsl_add_bridge(np, 0);
-	}
-	uses_fsl_uli_m1575 = 1;
-	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-#endif
-
-	printk("MPC8544 DS board from Freescale Semiconductor\n");
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init mpc8544_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	return of_flat_dt_is_compatible(root, "MPC8544DS");
-}
-
-define_machine(mpc8544_ds) {
-	.name			= "MPC8544 DS",
-	.probe			= mpc8544_ds_probe,
-	.setup_arch		= mpc8544_ds_setup_arch,
-	.init_IRQ		= mpc8544_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_irq,
-	.restart		= mpc85xx_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
new file mode 100644
index 0000000..48983bc
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -0,0 +1,188 @@
+/*
+ * MPC8544 DS Board Setup
+ *
+ * Author Xianghua Xiao (x.xiao@freescale.com)
+ * Roy Zang <tie-fei.zang@freescale.com>
+ * 	- Add PCI/PCI Exprees support
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+#ifdef CONFIG_PPC_I8259
+static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq != NO_IRQ) {
+		generic_handle_irq(cascade_irq);
+	}
+	desc->chip->eoi(irq);
+}
+#endif	/* CONFIG_PPC_I8259 */
+
+void __init mpc8544_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+#ifdef CONFIG_PPC_I8259
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize the i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+	    if (of_device_is_compatible(np, "chrp,iic")) {
+		cascade_node = np;
+		break;
+	}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	DBG("mpc8544ds: cascade mapped to irq %d\n", cascade_irq);
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc8544_8259_cascade);
+#endif	/* CONFIG_PPC_I8259 */
+}
+
+#ifdef CONFIG_PCI
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn);
+
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
+{
+	struct device_node* node;	
+	struct resource rsrc;
+
+	node = (struct device_node *)hose->arch_data;
+	of_address_to_resource(node, 0, &rsrc);
+
+	if ((rsrc.start & 0xfffff) == 0xb000) {
+		return uli_exclude_device(hose, bus, devfn);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+#endif	/* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc8544_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8544_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+		struct resource rsrc;
+		of_address_to_resource(np, 0, &rsrc);
+		if ((rsrc.start & 0xfffff) == 0xb000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+	}
+	uses_fsl_uli_m1575 = 1;
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#endif
+
+	printk("MPC8544 DS board from Freescale Semiconductor\n");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8544_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MPC8544DS");
+}
+
+define_machine(mpc8544_ds) {
+	.name			= "MPC8544 DS",
+	.probe			= mpc8544_ds_probe,
+	.setup_arch		= mpc8544_ds_setup_arch,
+	.init_IRQ		= mpc8544_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= mpc85xx_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
-- 
1.5.2.4

  reply	other threads:[~2007-09-13 21:08 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-13 21:07 [PATCH 00/22] [POWERPC] Patches in for-2.6.24 Kumar Gala
2007-09-13 21:07 ` [PATCH 01/22] ucc_geth: kill unused include Kumar Gala
2007-09-13 21:07   ` Kumar Gala [this message]
2007-09-13 21:07     ` [PATCH 03/22] [POWERPC] 85xx: Clean up from 85xx_ds rename Kumar Gala
2007-09-13 21:07       ` [PATCH 04/22] [POWERPC] Update mpc7448hpc2 device tree to be compatible for tsi109 chip Kumar Gala
2007-09-13 21:07         ` [PATCH 05/22] [POWERPC] linkstation updates Kumar Gala
2007-09-13 21:07           ` [PATCH 06/22] [POWERPC] 86xx: Remove unnecessary loops_per_jiffy initialization code Kumar Gala
2007-09-13 21:07             ` [PATCH 07/22] [POWERPC] 85xx: " Kumar Gala
2007-09-13 21:07               ` [PATCH 08/22] [POWERPC] fsl_soc.c cleanup Kumar Gala
2007-09-13 21:07                 ` [PATCH 09/22] [POWERPC] Handle alignment faults on SPE load/store instructions Kumar Gala
2007-09-13 21:07                   ` [PATCH 10/22] [POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port Kumar Gala
2007-09-13 21:07                     ` [PATCH 11/22] [POWERPC] DTS cleanup Kumar Gala
2007-09-13 21:07                       ` [PATCH 12/22] [POWERPC] Move PCI nodes to be sibilings with SOC nodes Kumar Gala
2007-09-13 21:07                         ` [PATCH 13/22] [POWERPC] 83xx: Removed PCI exclude of PHB Kumar Gala
2007-09-13 21:07                           ` [PATCH 14/22] [POWERPC] Add cpu feature for SPE handling Kumar Gala
2007-09-13 21:07                             ` [PATCH 15/22] [POWERPC] Fix modpost warnings from head*.S on ppc32 Kumar Gala
2007-09-13 21:07                               ` [PATCH 16/22] [PPC] Add clrbits8 and setbits8 Kumar Gala
2007-09-13 21:07                                 ` [PATCH 17/22] [POWERPC] QE: extern par_io_config_pin and par_io_data_set funcs Kumar Gala
2007-09-13 21:07                                   ` [PATCH 18/22] [POWERPC] add clrsetbits macros Kumar Gala
2007-09-13 21:07                                     ` [PATCH 19/22] [POWERPC] 86xx: Fix definition of global-utilites structure Kumar Gala
2007-09-13 21:07                                       ` [PATCH 20/22] [POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct index Kumar Gala
2007-09-13 21:07                                         ` [PATCH 21/22] [POWERPC] fsl_soc: add support for fsl_spi Kumar Gala
2007-09-13 21:08                                           ` [PATCH 22/22] [POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stub Kumar Gala
2007-09-14 12:32                                             ` Paul Mackerras
2007-09-14 13:21                                               ` Kumar Gala
2007-09-14 13:50                                                 ` Kumar Gala
2007-09-13 22:54         ` [PATCH 04/22] [POWERPC] Update mpc7448hpc2 device tree to be compatible for tsi109 chip Segher Boessenkool
2007-09-14 13:28           ` Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1189717683471-git-send-email-galak@kernel.crashing.org \
    --to=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.