From: Matthew Wilcox <matthew@wil.cx>
To: linux-scsi@vger.kernel.org
Cc: Matthew Wilcox <matthew@wil.cx>
Subject: [PATCH 06/17] advansys: Remove ASC_SELECT_QUEUE_DEPTHS
Date: Sun, 16 Sep 2007 09:37:37 -0600 [thread overview]
Message-ID: <11899570693386-git-send-email-matthew@wil.cx> (raw)
In-Reply-To: <1189867145.3339.3.camel@localhost.localdomain>
It was only ever set; never tested, nor cleared.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
---
drivers/scsi/advansys.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 52ea41d..5e6bcf2 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2230,7 +2230,6 @@ do { \
/* asc_board_t flags */
#define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */
-#define ASC_SELECT_QUEUE_DEPTHS 0x08
#define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0)
#define ASC_WIDE_BOARD(boardp) ((boardp)->flags & ASC_IS_WIDE_BOARD)
@@ -10135,7 +10134,6 @@ advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc)
static int advansys_slave_configure(struct scsi_device *sdev)
{
asc_board_t *boardp = ASC_BOARDP(sdev->host);
- boardp->flags |= ASC_SELECT_QUEUE_DEPTHS;
if (ASC_NARROW_BOARD(boardp))
advansys_narrow_slave_configure(sdev,
--
1.5.2.4
next prev parent reply other threads:[~2007-09-16 15:37 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-09 14:53 [0/22] Advansys updates 2007-09-09 Matthew Wilcox
2007-09-09 14:56 ` [PATCH 01/22] advansys: Fix VLB driver name Matthew Wilcox
2007-09-09 14:56 ` [PATCH 02/22] advansys: Create AdvBuildCarrierFreelist Matthew Wilcox
2007-09-09 14:56 ` [PATCH 03/22] advansys: Create AdvLoadMicrocode Matthew Wilcox
2007-09-09 14:56 ` [PATCH 04/22] advansys: Reformat microcode Matthew Wilcox
2007-09-09 14:56 ` [PATCH 05/22] advansys: Shrink advansys_board_found a little more Matthew Wilcox
2007-09-09 14:56 ` [PATCH 06/22] advansys: Remove `waiting' queue Matthew Wilcox
2007-09-09 14:56 ` [PATCH 07/22] advansys: Remove a check for an impossible condition Matthew Wilcox
2007-09-09 14:56 ` [PATCH 08/22] advansys: Remove `done' queue Matthew Wilcox
2007-09-09 14:56 ` [PATCH 09/22] advansys: Remove `active' queue and all remaining internal queueing code Matthew Wilcox
2007-09-09 14:56 ` [PATCH 10/22] advansys: Enable interrupts earlier in queuecommand Matthew Wilcox
2007-09-09 14:56 ` [PATCH 11/22] advansys: Support 16-byte commands properly Matthew Wilcox
2007-09-09 14:56 ` [PATCH 12/22] advansys: Remove a check for an impossible condition Matthew Wilcox
2007-09-09 14:56 ` [PATCH 13/22] advansys: Remove some custom wrappers Matthew Wilcox
2007-09-09 14:56 ` [PATCH 14/22] advansys: Comment/indentation/macro cleanup Matthew Wilcox
2007-09-09 14:56 ` [PATCH 15/22] advansys: Use DRV_NAME Matthew Wilcox
2007-09-09 14:56 ` [PATCH 16/22] advansys: Eliminate prototypes Matthew Wilcox
2007-09-09 15:29 ` Jeff Garzik
2007-09-09 17:48 ` Matthew Wilcox
2007-09-15 14:39 ` James Bottomley
2007-09-16 15:31 ` Matthew Wilcox
2007-09-16 22:41 ` FUJITA Tomonori
2007-09-16 23:03 ` Matthew Wilcox
2007-09-16 23:17 ` FUJITA Tomonori
2007-09-17 12:21 ` Matthew Wilcox
2007-09-16 15:37 ` [PATCH 01/17] " Matthew Wilcox
2007-09-16 15:37 ` [PATCH 02/17] advansys: Remove array of scsi targets Matthew Wilcox
2007-09-16 15:37 ` [PATCH 03/17] advansys: Restructure asc_execute_scsi_cmnd() Matthew Wilcox
2007-09-16 15:37 ` [PATCH 04/17] advansys: Fix simultaneous calls to ->queuecommand Matthew Wilcox
2007-09-16 15:37 ` [PATCH 05/17] advansys: Improve reset handler Matthew Wilcox
2007-09-16 15:37 ` Matthew Wilcox [this message]
2007-09-16 15:37 ` [PATCH 07/17] advansys: Remove ASC_WIDE_BOARD predicate Matthew Wilcox
2007-09-16 15:37 ` [PATCH 08/17] advansys: Sort out irq number mess Matthew Wilcox
2007-09-16 15:37 ` [PATCH 09/17] advansys: Merge ASC_IERR definitions Matthew Wilcox
2007-09-16 15:37 ` [PATCH 10/17] advansys: Remove asc_board_t typedef and ASC_BOARDP macro Matthew Wilcox
2007-09-16 16:14 ` Matthew Wilcox
2007-09-16 15:37 ` [PATCH 11/17] advansys: Remove library version & serial numbers Matthew Wilcox
2007-09-16 15:37 ` [PATCH 12/17] advansys: Sort out debug macros Matthew Wilcox
2007-09-16 15:37 ` [PATCH 13/17] advansys: Remove private lock Matthew Wilcox
2007-09-16 15:37 ` [PATCH 14/17] advansys: Get rid of board index number Matthew Wilcox
2007-09-16 15:37 ` [PATCH 15/17] advansys: Make sdtr_period_tbl a pointer Matthew Wilcox
2007-09-16 15:37 ` [PATCH 16/17] advansys: Move a couple of fields from struct board to struct adv_dvc Matthew Wilcox
2007-09-16 15:37 ` [PATCH 17/17] advansys: Remove DvcGetPhyAddr Matthew Wilcox
2007-09-16 20:39 ` [PATCH 10/17] advansys: Remove asc_board_t typedef and ASC_BOARDP macro Matthew Wilcox
2007-09-09 14:56 ` [PATCH 17/22] advansys: Remove array of scsi targets Matthew Wilcox
2007-09-09 14:56 ` [PATCH 18/22] advansys: Restructure asc_execute_scsi_cmnd() Matthew Wilcox
2007-09-09 14:56 ` [PATCH 19/22] advansys: Fix simultaneous calls to ->queuecommand Matthew Wilcox
2007-09-09 14:56 ` [PATCH 20/22] advansys: Improve reset handler Matthew Wilcox
2007-09-09 14:56 ` [PATCH 21/22] advansys: Remove ASC_SELECT_QUEUE_DEPTHS Matthew Wilcox
2007-09-09 14:56 ` [PATCH 22/22] advansys: Remove ASC_WIDE_BOARD predicate Matthew Wilcox
2007-09-10 20:00 ` [0/22] Advansys updates 2007-09-09 FUJITA Tomonori
2007-09-11 18:18 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11899570693386-git-send-email-matthew@wil.cx \
--to=matthew@wil.cx \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.