From: James Bottomley <James.Bottomley@SteelEye.com>
To: "Wu, Gilbert" <Gilbert_Wu@adaptec.com>
Cc: dougg@torque.net, Linux-scsi@vger.kernel.org
Subject: RE: [PATCH] aic94xx: fix smartctl utility problem
Date: Mon, 17 Sep 2007 17:59:01 -0500 [thread overview]
Message-ID: <1190069941.3386.64.camel@localhost.localdomain> (raw)
In-Reply-To: <BC382691D59EC94C8E57543C47EF8ED55B20E1@aime2k302.adaptec.com>
On Mon, 2007-09-17 at 13:53 -0700, Wu, Gilbert wrote:
> I tested the SATA DVD Plextor model 716SA and 755SA with direct
> attached. Both failed in my tested system and it end up with System
> Panic even without my patch.
Actually, because of the difficulty of wiring it up, I've not tried
directly attached SATAPI devices, only expander remote ones (which do
work). I did manage to cheat and force one into a drive bay using a
mini inifiniband connector, and it seems to work just fine as well.
This is the boot log with it directly connected to phy6:
aic94xx: posting 8 control phy scbs
aic94xx: control_phy_tasklet_complete: phy6, lrate:0x8, proto:0xe
aic94xx: control_phy_tasklet_complete: phy0: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy1: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy2: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy3: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy4: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy5: no device present: oob_status:0x0
aic94xx: control_phy_tasklet_complete: phy7: no device present: oob_status:0x0
aic94xx: escb_tasklet_complete: phy6: BYTES_DMAED
aic94xx: STP proto device-to-host FIS:
aic94xx: 00: 34 00 10 01
aic94xx: 04: 01 14 eb 00
aic94xx: 08: 00 00 00 00
aic94xx: 0c: 01 00 00 00
aic94xx: 10: 00 00 00 00
aic94xx: asd_form_port: updating phy_mask 0x40 for phy6
sas: phy6 added to port0, phy_mask:0x40
sas: DOING DISCOVERY on port 0, pid:3197
sas: sas_ata_phy_reset: Found ATAPI device.
ata1.00: ATAPI: PLEXTOR DVDR PX-755A, 1.03, max UDMA/66
ata1.00: configured for UDMA/66
scsi 3:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi generic sg1 type 5
sas: DONE DISCOVERY on port 0, pid:3197, result:0
> The CSMI_TASK should not make any
> difference between ATA and ATAPI device. I am digging into it for root
> cause.
It does if it's set on a command that's not generated by the smartctl
utility ... which is what happens for the ATA PACKET COMMAND case.
James
next prev parent reply other threads:[~2007-09-17 22:59 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-14 17:58 [PATCH] aic94xx: fix smartctl utility problem Gilbert Wu
2007-09-14 18:14 ` Jeff Garzik
2007-09-15 17:05 ` James Bottomley
2007-09-16 16:37 ` James Bottomley
2007-09-16 19:43 ` Jeff Garzik
2007-09-16 23:01 ` Douglas Gilbert
2007-09-16 23:21 ` James Bottomley
2007-09-17 20:53 ` Wu, Gilbert
2007-09-17 22:59 ` James Bottomley [this message]
2007-09-18 1:43 ` Wu, Gilbert
2007-09-18 3:31 ` James Bottomley
2007-09-21 18:53 ` Wu, Gilbert
2007-09-21 20:40 ` James Bottomley
2007-09-21 23:05 ` Wu, Gilbert
2007-09-20 18:52 ` Douglas Gilbert
2007-09-18 20:35 ` Luben Tuikov
-- strict thread matches above, loose matches on Subject: below --
2007-09-14 12:30 Gilbert Wu
2007-09-14 17:26 ` Jeff Garzik
2007-09-14 17:30 ` Wu, Gilbert
2007-09-05 22:25 Gilbert Wu
2007-09-06 10:06 ` Jeff Garzik
2007-09-06 18:33 ` Wu, Gilbert
2007-09-07 23:00 ` Jeff Garzik
2007-09-07 23:58 ` Wu, Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1190069941.3386.64.camel@localhost.localdomain \
--to=james.bottomley@steeleye.com \
--cc=Gilbert_Wu@adaptec.com \
--cc=Linux-scsi@vger.kernel.org \
--cc=dougg@torque.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.