From: Matthew Wilcox <willy@linux.intel.com>
To: linux-scsi@vger.kernel.org
Cc: Matthew Wilcox <matthew@wil.cx>, Matthew Wilcox <willy@linux.intel.com>
Subject: [PATCH] gdth: Stop abusing ->done for internal commands
Date: Tue, 25 Sep 2007 12:42:03 -0400 [thread overview]
Message-ID: <1190738524757-git-send-email-willy@linux.intel.com> (raw)
In-Reply-To: <1190738524460-git-send-email-willy@linux.intel.com>
From: Matthew Wilcox <matthew@wil.cx>
The ->done member was being used to mark commands as being internal.
I decided to put a magic number in ->underflow instead. I believe this
to be safe as no current user of ->underflow has any of the bottom 9
bits set.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
---
drivers/scsi/gdth.c | 19 +++++++++++--------
drivers/scsi/gdth_proc.c | 4 ++--
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 8a6a5f8..42a200f 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -691,6 +691,9 @@ static const struct file_operations gdth_fops = {
.release = gdth_close,
};
+#define GDTH_MAGIC 0xc2e7c389 /* I got it from /dev/urandom */
+#define IS_GDTH_INTERNAL_CMD(scp) (scp->underflow == GDTH_MAGIC)
+
#include "gdth_proc.h"
#include "gdth_proc.c"
@@ -713,7 +716,7 @@ static void gdth_scsi_done(struct scsi_cmnd *scp)
{
TRACE2(("gdth_scsi_done()\n"));
- if (scp->done == gdth_scsi_done)
+ if (IS_GDTH_INTERNAL_CMD(scp))
complete((struct completion *)scp->request);
else
scp->scsi_done(scp);
@@ -738,7 +741,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
scp->SCp.this_residual = IOCTL_PRI; /* priority */
- scp->done = gdth_scsi_done;
+ scp->underflow = GDTH_MAGIC;
gdth_queuecommand(scp, NULL);
wait_for_completion(&wait);
@@ -2319,7 +2322,7 @@ static void gdth_putq(int hanum,Scsi_Cmnd *scp,unchar priority)
ha = HADATA(gdth_ctr_tab[hanum]);
spin_lock_irqsave(&ha->smp_lock, flags);
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
scp->SCp.this_residual = (int)priority;
b = virt_ctr ? NUMDATA(scp->device->host)->busnum:scp->device->channel;
t = scp->device->id;
@@ -2382,7 +2385,7 @@ static void gdth_next(int hanum)
for (nscp = pscp = ha->req_first; nscp; nscp = (Scsi_Cmnd *)nscp->SCp.ptr) {
if (nscp != pscp && nscp != (Scsi_Cmnd *)pscp->SCp.ptr)
pscp = (Scsi_Cmnd *)pscp->SCp.ptr;
- if (nscp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(nscp)) {
b = virt_ctr ?
NUMDATA(nscp->device->host)->busnum : nscp->device->channel;
t = nscp->device->id;
@@ -2408,7 +2411,7 @@ static void gdth_next(int hanum)
firsttime = FALSE;
}
- if (nscp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(nscp)) {
if (nscp->SCp.phase == -1) {
nscp->SCp.phase = CACHESERVICE; /* default: cache svc. */
if (nscp->cmnd[0] == TEST_UNIT_READY) {
@@ -2471,7 +2474,7 @@ static void gdth_next(int hanum)
else
gdth_scsi_done(nscp);
}
- } else if (nscp->done == gdth_scsi_done) {
+ } else if (IS_GDTH_INTERNAL_CMD(nscp)) {
if (!(cmd_index=gdth_special_cmd(hanum,nscp)))
this_cmd = FALSE;
next_cmd = FALSE;
@@ -3812,7 +3815,7 @@ static int gdth_sync_event(int hanum,int service,unchar index,Scsi_Cmnd *scp)
scp->sense_buffer[2] = NOT_READY;
scp->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
}
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
ha->dvr.size = sizeof(ha->dvr.eu.sync);
ha->dvr.eu.sync.ionode = hanum;
ha->dvr.eu.sync.service = service;
@@ -4910,7 +4913,7 @@ static int gdth_queuecommand(struct scsi_cmnd *scp,
#endif
priority = DEFAULT_PRI;
- if (scp->done == gdth_scsi_done)
+ if (IS_GDTH_INTERNAL_CMD(scp))
priority = scp->SCp.this_residual;
else
gdth_update_timeout(hanum, scp, scp->timeout_per_command * 6);
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 32982eb..1f8d9a5 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -805,7 +805,7 @@ static void gdth_stop_timeout(int hanum, int busnum, int id)
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;
@@ -829,7 +829,7 @@ static void gdth_start_timeout(int hanum, int busnum, int id)
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
- if (scp->done != gdth_scsi_done) {
+ if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;
--
1.5.3.1
next prev parent reply other threads:[~2007-09-25 16:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-25 16:42 Remove ->done from scsi_cmnd Matthew Wilcox
2007-09-25 16:42 ` [PATCH] Fix mistaken uses of ->done Matthew Wilcox
2007-09-25 16:42 ` [PATCH] pluto: Don't abuse ->done for internal commands Matthew Wilcox
2007-09-25 16:42 ` Matthew Wilcox [this message]
2007-09-25 17:30 ` [PATCH] gdth: Stop abusing " Boaz Harrosh
2007-09-25 17:33 ` Matthew Wilcox
2007-09-25 16:42 ` [PATCH] Get rid of scsi_cmnd->done Matthew Wilcox
2007-09-25 17:05 ` Boaz Harrosh
2007-09-25 17:09 ` Matthew Wilcox
2007-09-26 19:54 ` Remove ->done from scsi_cmnd Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1190738524757-git-send-email-willy@linux.intel.com \
--to=willy@linux.intel.com \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.