From: Zhu Yi <yi.zhu@intel.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, Zhu Yi <yi.zhu@intel.com>,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH] iwlwifi: replacing IPW with IWL in error messages
Date: Thu, 27 Sep 2007 11:27:30 +0800 [thread overview]
Message-ID: <11908636662994-git-send-email-yi.zhu@intel.com> (raw)
In-Reply-To: <11908636643693-git-send-email-yi.zhu@intel.com>
This patch repaces IPW with IWL in error messages.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 +++---
drivers/net/wireless/iwlwifi/iwl4965-base.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 44f983b..c271418 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -204,7 +204,7 @@ static void iwl_print_hex_dump(int level, void *p, u32 len)
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * The IPW operates with six queues, one receive queue in the device's
+ * The IWL operates with six queues, one receive queue in the device's
* sram, one transmit queue for sending commands to the device firmware,
* and four transmit queues for data.
***************************************************/
@@ -4591,12 +4591,12 @@ static void iwl_dump_nic_event_log(struct iwl_priv *priv)
/* bail out if nothing in log */
if (size == 0) {
- IWL_ERROR("Start IPW Event Log Dump: nothing in log\n");
+ IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
iwl_release_restricted_access(priv);
return;
}
- IWL_ERROR("Start IPW Event Log Dump: display count %d, wraps %d\n",
+ IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
size, num_wraps);
/* if uCode has wrapped back to top of log, start at the oldest entry,
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 61500a2..9ad68b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -203,7 +203,7 @@ static void iwl_print_hex_dump(int level, void *p, u32 len)
* reclaiming packets (on 'tx done IRQ), if free space become > high mark,
* Tx queue resumed.
*
- * The IPW operates with six queues, one receive queue in the device's
+ * The IWL operates with six queues, one receive queue in the device's
* sram, one transmit queue for sending commands to the device firmware,
* and four transmit queues for data.
***************************************************/
@@ -4900,12 +4900,12 @@ static void iwl_dump_nic_event_log(struct iwl_priv *priv)
/* bail out if nothing in log */
if (size == 0) {
- IWL_ERROR("Start IPW Event Log Dump: nothing in log\n");
+ IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
iwl_release_restricted_access(priv);
return;
}
- IWL_ERROR("Start IPW Event Log Dump: display count %d, wraps %d\n",
+ IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
size, num_wraps);
/* if uCode has wrapped back to top of log, start at the oldest entry,
--
1.5.1
next parent reply other threads:[~2007-09-27 3:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <11908636643693-git-send-email-yi.zhu@intel.com>
2007-09-27 3:27 ` Zhu Yi [this message]
2007-09-27 3:27 ` [PATCH] iwlwifi: workaournd REPLY_COMPRESSED_BA command in iwl_rx_handle Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Correction for sending beacon in config_ap Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: clear station table in rxon unconditionally Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Fix typo in rate sacling algorithm Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: fix add_station to avoid FW error Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: removing unnecessary memset in 4965 rate scale Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add debugfs framework to " Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add read rate scale table debugfs function Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: limit printouts on hot path Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add supp_rates to rate scale sta private data Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: rs_rate_scale_perform clean up Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: set fixed rate through debugfs Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: add debugfs rate scale stats Zhu Yi
2007-09-27 3:27 ` [PATCH] iwlwifi: Update iwlwifi version stamp to 1.1.17 Zhu Yi
2007-09-27 4:35 ` [PATCH] iwlwifi: set fixed rate through debugfs Randy Dunlap
2007-09-27 4:43 ` Zhu Yi
2007-09-27 14:26 ` Randy Dunlap
2007-09-28 7:44 ` Tomas Winkler
2007-09-27 4:32 ` [PATCH] iwlwifi: replacing IPW with IWL in error messages Randy Dunlap
2007-09-27 4:42 ` Zhu Yi
2007-09-27 20:41 ` iwlwifi driver updates John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11908636662994-git-send-email-yi.zhu@intel.com \
--to=yi.zhu@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.