All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: Eugene Shalygin <eugene.shalygin@gmail.com>
Cc: Denis Pauk <pauk.denis@gmail.com>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Jonathan Corbet <corbet@lwn.net>,
	linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] hwmon: (asus-ec-sensors) add CPU core voltage
Date: Tue, 08 Feb 2022 17:15:46 +0100	[thread overview]
Message-ID: <11918951.O9o76ZdvQC@natalenko.name> (raw)
In-Reply-To: <20220208094244.1106312-1-eugene.shalygin@gmail.com>

Hello.

On úterý 8. února 2022 10:42:43 CET Eugene Shalygin wrote:
> A user discovered [1] the CPU Core voltage sensor, which spans 2
> registers and provides output in mV. Althroug the discovery was made
> with a X470 chipset, the sensor is present in X570 (tested with C8H).
> For now simply add it to each board with the CPU current sensor present.
> 
> [1] https://github.com/zeule/asus-ec-sensors/issues/12
> 
> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
> ---
>  Documentation/hwmon/asus_ec_sensors.rst |  1 +
>  drivers/hwmon/asus-ec-sensors.c         | 29 ++++++++++++++++---------
>  2 files changed, 20 insertions(+), 10 deletions(-)
> 
> diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst
> index 22de1b037cfb..e7e8f1640f45 100644
> --- a/Documentation/hwmon/asus_ec_sensors.rst
> +++ b/Documentation/hwmon/asus_ec_sensors.rst
> @@ -39,6 +39,7 @@ The driver is aware of and reads the following sensors:
>  9. Readings from the "Water flow meter" header (RPM)
>  10. Readings from the "Water In" and "Water Out" temperature headers
>  11. CPU current
> +12. CPU core voltage
>  
>  Sensor values are read from EC registers, and to avoid race with the board
>  firmware the driver acquires ACPI mutex, the one used by the WMI when its
> diff --git a/drivers/hwmon/asus-ec-sensors.c b/drivers/hwmon/asus-ec-sensors.c
> index dd7b207d062f..bfac08a5dc57 100644
> --- a/drivers/hwmon/asus-ec-sensors.c
> +++ b/drivers/hwmon/asus-ec-sensors.c
> @@ -18,6 +18,7 @@
>   * - VRM Heat Sink fan RPM
>   * - Water Flow fan RPM
>   * - CPU current
> + * - CPU core voltage
>   */
>  
>  #include <linux/acpi.h>
> @@ -100,6 +101,8 @@ enum ec_sensors {
>  	ec_sensor_temp_t_sensor,
>  	/* VRM temperature [℃] */
>  	ec_sensor_temp_vrm,
> +	/* CPU Core voltage [mV] */
> +	ec_sensor_in_cpu_core,
>  	/* CPU_Opt fan [RPM] */
>  	ec_sensor_fan_cpu_opt,
>  	/* VRM heat sink fan [RPM] */
> @@ -121,6 +124,7 @@ enum ec_sensors {
>  #define SENSOR_TEMP_MB BIT(ec_sensor_temp_mb)
>  #define SENSOR_TEMP_T_SENSOR BIT(ec_sensor_temp_t_sensor)
>  #define SENSOR_TEMP_VRM BIT(ec_sensor_temp_vrm)
> +#define SENSOR_IN_CPU_CORE BIT(ec_sensor_in_cpu_core)
>  #define SENSOR_FAN_CPU_OPT BIT(ec_sensor_fan_cpu_opt)
>  #define SENSOR_FAN_VRM_HS BIT(ec_sensor_fan_vrm_hs)
>  #define SENSOR_FAN_CHIPSET BIT(ec_sensor_fan_chipset)
> @@ -139,6 +143,8 @@ static const struct ec_sensor_info known_ec_sensors[] = {
>  	[ec_sensor_temp_t_sensor] =
>  		EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
>  	[ec_sensor_temp_vrm] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
> +	[ec_sensor_in_cpu_core] =
> +		EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
>  	[ec_sensor_fan_cpu_opt] =
>  		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
>  	[ec_sensor_fan_vrm_hs] = EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
> @@ -172,32 +178,34 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
>  		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "Pro WS X570-ACE",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_VRM |
> -		SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> +		SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),

Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>

on Pro WS X570-ACE:

```
asusec-isa-0000
Adapter: ISA adapter
CPU Core:      1.47 V
…
```

Thanks.

>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
>  			      "ROG CROSSHAIR VIII DARK HERO",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
>  		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
> -		SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> +		SENSOR_FAN_CPU_OPT | SENSOR_FAN_WATER_FLOW |
> +		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
>  			      "ROG CROSSHAIR VIII FORMULA",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
>  		SENSOR_TEMP_VRM | SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> -		SENSOR_CURR_CPU),
> +		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG CROSSHAIR VIII HERO",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
>  		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
>  		SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> -		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> +		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
>  			      "ROG CROSSHAIR VIII HERO (WI-FI)",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
>  		SENSOR_TEMP_VRM | SENSOR_SET_TEMP_WATER |
>  		SENSOR_FAN_CPU_OPT | SENSOR_FAN_CHIPSET |
> -		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU),
> +		SENSOR_FAN_WATER_FLOW | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE,
>  			      "ROG CROSSHAIR VIII IMPACT",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB | SENSOR_TEMP_T_SENSOR |
> -		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> +		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
> +		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-E GAMING",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
>  		SENSOR_TEMP_T_SENSOR |
> @@ -205,17 +213,19 @@ static const struct dmi_system_id asus_ec_dmi_table[] __initconst = {
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX B550-I GAMING",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
>  		SENSOR_TEMP_T_SENSOR |
> -		SENSOR_TEMP_VRM | SENSOR_FAN_VRM_HS | SENSOR_CURR_CPU),
> +		SENSOR_TEMP_VRM | SENSOR_FAN_VRM_HS |
> +		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-E GAMING",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
>  		SENSOR_TEMP_T_SENSOR |
> -		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> +		SENSOR_TEMP_VRM | SENSOR_FAN_CHIPSET |
> +		SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-F GAMING",
>  		SENSOR_SET_TEMP_CHIPSET_CPU_MB |
>  		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET),
>  	DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-I GAMING",
>  		SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
> -		SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),
> +		SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU | SENSOR_IN_CPU_CORE),
>  	{}
>  };
>  
> @@ -467,7 +477,6 @@ static long scale_sensor_value(s32 value, int data_type)
>  	switch (data_type) {
>  	case hwmon_curr:
>  	case hwmon_temp:
> -	case hwmon_in:
>  		return value * MILLI;
>  	default:
>  		return value;
> 


-- 
Oleksandr Natalenko (post-factum)



  reply	other threads:[~2022-02-08 16:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08  9:42 [PATCH] hwmon: (asus-ec-sensors) add CPU core voltage Eugene Shalygin
2022-02-08 16:15 ` Oleksandr Natalenko [this message]
2022-02-08 20:54   ` Denis Pauk
2022-02-08 23:30 ` Guenter Roeck
2022-02-08 23:33   ` Eugene Shalygin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11918951.O9o76ZdvQC@natalenko.name \
    --to=oleksandr@natalenko.name \
    --cc=corbet@lwn.net \
    --cc=eugene.shalygin@gmail.com \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=pauk.denis@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.