From: Peter Zijlstra <a.p.zijlstra@chello.nl>
To: Folkert van Heusden <folkert@vanheusden.com>
Cc: linux-kernel@vger.kernel.org, Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [2.6.23.1] possible circular locking dependency detected
Date: Sun, 14 Oct 2007 01:19:56 +0200 [thread overview]
Message-ID: <1192317596.5625.12.camel@lappy> (raw)
In-Reply-To: <20071013223614.GF25076@vanheusden.com>
On Sun, 2007-10-14 at 00:36 +0200, Folkert van Heusden wrote:
> I've got a deja-vu feeling for this one but in any case:
>
>
> [ 7393.894980] =======================================================
> [ 7393.895081] [ INFO: possible circular locking dependency detected ]
> [ 7393.895130] 2.6.23.1 #2
> [ 7393.895175] -------------------------------------------------------
> [ 7393.895225] moo/28246 is trying to acquire lock:
> [ 7393.895275] (tty_mutex){--..}, at: [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.895486]
> [ 7393.895487] but task is already holding lock:
> [ 7393.895578] (&s->s_dquot.dqptr_sem){----}, at: [<c10a76ab>] dquot_alloc_space+0x50/0x189
> [ 7393.895784]
> [ 7393.895785] which lock already depends on the new lock.
> [ 7393.895788]
> [ 7393.895915]
> [ 7393.895916] the existing dependency chain (in reverse order) is:
> [ 7393.896003]
> [ 7393.896005] -> #3 (&s->s_dquot.dqptr_sem){----}:
> [ 7393.896209] [<c103e375>] check_prev_add+0xc4/0x1fb
> [ 7393.896555] [<c103e537>] check_prevs_add+0x8b/0xe8
> [ 7393.896890] [<c103e7bf>] validate_chain+0x22b/0x354
> [ 7393.897223] [<c103fe7a>] __lock_acquire+0x1a0/0x74a
> [ 7393.897553] [<c1040895>] lock_acquire+0x6b/0x8a
> [ 7393.897882] [<c1036cef>] down_read+0x2b/0x3d
> [ 7393.898205] [<c10a76ab>] dquot_alloc_space+0x50/0x189
> [ 7393.898537] [<c10b90c7>] ext3_new_blocks+0x44b/0x5a2
> [ 7393.898868] [<c10bb6ac>] ext3_alloc_blocks+0x40/0xdf
> [ 7393.899194] [<c10bb79b>] ext3_alloc_branch+0x50/0x21b
> [ 7393.899527] [<c10bbc79>] ext3_get_blocks_handle+0x1b8/0x367
> [ 7393.899858] [<c10bbfa2>] ext3_getblk+0x97/0x228
> [ 7393.900186] [<c10bc14d>] ext3_bread+0x1a/0x78
> [ 7393.900514] [<c10c13a4>] ext3_mkdir+0xf2/0x270
> [ 7393.900851] [<c107fda3>] vfs_mkdir+0xb3/0x161
> [ 7393.901174] [<c107fedd>] sys_mkdirat+0x8c/0xc4
> [ 7393.901512] [<c107ff35>] sys_mkdir+0x20/0x22
> [ 7393.901841] [<c1003ffe>] syscall_call+0x7/0xb
> [ 7393.902169] [<ffffffff>] 0xffffffff
> [ 7393.902511]
> [ 7393.902512] -> #2 (&ei->truncate_mutex){--..}:
> [ 7393.902706] [<c103e375>] check_prev_add+0xc4/0x1fb
> [ 7393.903033] [<c103e537>] check_prevs_add+0x8b/0xe8
> [ 7393.903364] [<c103e7bf>] validate_chain+0x22b/0x354
> [ 7393.903700] [<c103fe7a>] __lock_acquire+0x1a0/0x74a
> [ 7393.904353] [<c1040895>] lock_acquire+0x6b/0x8a
> [ 7393.904682] [<c1232020>] __mutex_lock_slowpath+0x75/0x299
> [ 7393.905015] [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.905339] [<c10bbb9a>] ext3_get_blocks_handle+0xd9/0x367
> [ 7393.905675] [<c10bbea0>] ext3_get_block+0x78/0xe3
> [ 7393.906009] [<c1097beb>] __block_prepare_write+0x168/0x415
> [ 7393.906339] [<c10986f7>] block_prepare_write+0x28/0x3b
> [ 7393.906673] [<c10bc34c>] ext3_prepare_write+0xe3/0x17e
> [ 7393.907002] [<c10579c5>] generic_file_buffered_write+0x1cb/0x62b
> [ 7393.907333] [<c105805f>] __generic_file_aio_write_nolock+0x23a/0x53d
> [ 7393.907667] [<c105846b>] generic_file_aio_write+0x58/0xc4
> [ 7393.907998] [<c10b9f1f>] ext3_file_write+0x2d/0xba
> [ 7393.908324] [<c1076303>] do_sync_write+0xc7/0x116
> [ 7393.908655] [<c10764aa>] vfs_write+0x158/0x15d
> [ 7393.908981] [<c1076550>] sys_write+0x3d/0x64
> [ 7393.909310] [<c1003ffe>] syscall_call+0x7/0xb
> [ 7393.909635] [<ffffffff>] 0xffffffff
> [ 7393.909974]
> [ 7393.909976] -> #1 (&inode->i_mutex){--..}:
> [ 7393.910163] [<c103e375>] check_prev_add+0xc4/0x1fb
> [ 7393.910496] [<c103e537>] check_prevs_add+0x8b/0xe8
> [ 7393.910823] [<c103e7bf>] validate_chain+0x22b/0x354
> [ 7393.911152] [<c103fe7a>] __lock_acquire+0x1a0/0x74a
> [ 7393.911478] [<c1040895>] lock_acquire+0x6b/0x8a
> [ 7393.911807] [<c1232020>] __mutex_lock_slowpath+0x75/0x299
> [ 7393.912137] [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.912465] [<c10b7385>] get_node+0x21/0x4d
> [ 7393.912788] [<c10b7566>] devpts_get_tty+0xb/0x3b
> [ 7393.913398] [<c1141896>] init_dev+0x22b/0x58b
> [ 7393.913718] [<c114274e>] ptmx_open+0x90/0x1c9
> [ 7393.913992] [<c1078c01>] chrdev_open+0xaf/0x171
> [ 7393.914001] [<c1075456>] __dentry_open+0x152/0x1d3
> [ 7393.914008] [<c10755d5>] nameidata_to_filp+0x28/0x3f
> [ 7393.914018] [<c107551d>] do_filp_open+0x46/0x53
> [ 7393.914024] [<c107585a>] do_sys_open+0x54/0xda
> [ 7393.914031] [<c10758fc>] sys_open+0x1c/0x1e
> [ 7393.914038] [<c1003ffe>] syscall_call+0x7/0xb
> [ 7393.914046] [<ffffffff>] 0xffffffff
> [ 7393.914069]
> [ 7393.914070] -> #0 (tty_mutex){--..}:
> [ 7393.914074] [<c103e2e5>] check_prev_add+0x34/0x1fb
> [ 7393.914084] [<c103e537>] check_prevs_add+0x8b/0xe8
> [ 7393.914092] [<c103e7bf>] validate_chain+0x22b/0x354
> [ 7393.914103] [<c103fe7a>] __lock_acquire+0x1a0/0x74a
> [ 7393.914111] [<c1040895>] lock_acquire+0x6b/0x8a
> [ 7393.914117] [<c1232020>] __mutex_lock_slowpath+0x75/0x299
> [ 7393.914126] [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.914134] [<c10a7039>] print_warning+0x8c/0x15d
> [ 7393.914143] [<c10a77df>] dquot_alloc_space+0x184/0x189
> [ 7393.914154] [<c10b90c7>] ext3_new_blocks+0x44b/0x5a2
> [ 7393.914162] [<c10bb6ac>] ext3_alloc_blocks+0x40/0xdf
> [ 7393.914170] [<c10bb79b>] ext3_alloc_branch+0x50/0x21b
> [ 7393.914177] [<c10bbc79>] ext3_get_blocks_handle+0x1b8/0x367
> [ 7393.914185] [<c10bbea0>] ext3_get_block+0x78/0xe3
> [ 7393.914195] [<c1097beb>] __block_prepare_write+0x168/0x415
> [ 7393.914203] [<c10986f7>] block_prepare_write+0x28/0x3b
> [ 7393.914211] [<c10bc34c>] ext3_prepare_write+0xe3/0x17e
> [ 7393.914218] [<c10579c5>] generic_file_buffered_write+0x1cb/0x62b
> [ 7393.914226] [<c105805f>] __generic_file_aio_write_nolock+0x23a/0x53d
> [ 7393.914238] [<c105846b>] generic_file_aio_write+0x58/0xc4
> [ 7393.914245] [<c10b9f1f>] ext3_file_write+0x2d/0xba
> [ 7393.914252] [<c1076303>] do_sync_write+0xc7/0x116
> [ 7393.914260] [<c10764aa>] vfs_write+0x158/0x15d
> [ 7393.914266] [<c1076550>] sys_write+0x3d/0x64
> [ 7393.914274] [<c1003ffe>] syscall_call+0x7/0xb
> [ 7393.914280] [<ffffffff>] 0xffffffff
> [ 7393.914290]
> [ 7393.914291] other info that might help us debug this:
> [ 7393.914293]
> [ 7393.914295] 3 locks held by moo/28246:
> [ 7393.914298] #0: (&inode->i_mutex){--..}, at: [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.914305] #1: (&ei->truncate_mutex){--..}, at: [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.914315] #2: (&s->s_dquot.dqptr_sem){----}, at: [<c10a76ab>] dquot_alloc_space+0x50/0x189
> [ 7393.914322]
> [ 7393.914323] stack backtrace:
> [ 7393.914325] [<c1004dcc>] show_trace_log_lvl+0x1a/0x30
> [ 7393.914330] [<c1004df4>] show_trace+0x12/0x14
> [ 7393.914334] [<c1004eee>] dump_stack+0x16/0x18
> [ 7393.914339] [<c103db51>] print_circular_bug_tail+0x6f/0x71
> [ 7393.914344] [<c103e2e5>] check_prev_add+0x34/0x1fb
> [ 7393.914348] [<c103e537>] check_prevs_add+0x8b/0xe8
> [ 7393.914354] [<c103e7bf>] validate_chain+0x22b/0x354
> [ 7393.914362] [<c103fe7a>] __lock_acquire+0x1a0/0x74a
> [ 7393.914365] [<c1040895>] lock_acquire+0x6b/0x8a
> [ 7393.914369] [<c1232020>] __mutex_lock_slowpath+0x75/0x299
> [ 7393.914373] [<c1231f9f>] mutex_lock+0x8/0xa
> [ 7393.914377] [<c10a7039>] print_warning+0x8c/0x15d
> [ 7393.914383] [<c10a77df>] dquot_alloc_space+0x184/0x189
> [ 7393.914387] [<c10b90c7>] ext3_new_blocks+0x44b/0x5a2
> [ 7393.914391] [<c10bb6ac>] ext3_alloc_blocks+0x40/0xdf
> [ 7393.914397] [<c10bb79b>] ext3_alloc_branch+0x50/0x21b
> [ 7393.914403] [<c10bbc79>] ext3_get_blocks_handle+0x1b8/0x367
> [ 7393.914407] [<c10bbea0>] ext3_get_block+0x78/0xe3
> [ 7393.914411] [<c1097beb>] __block_prepare_write+0x168/0x415
> [ 7393.914415] [<c10986f7>] block_prepare_write+0x28/0x3b
> [ 7393.914420] [<c10bc34c>] ext3_prepare_write+0xe3/0x17e
> [ 7393.914425] [<c10579c5>] generic_file_buffered_write+0x1cb/0x62b
> [ 7393.914429] [<c105805f>] __generic_file_aio_write_nolock+0x23a/0x53d
> [ 7393.914433] [<c105846b>] generic_file_aio_write+0x58/0xc4
> [ 7393.914440] [<c10b9f1f>] ext3_file_write+0x2d/0xba
> [ 7393.914445] [<c1076303>] do_sync_write+0xc7/0x116
> [ 7393.914448] [<c10764aa>] vfs_write+0x158/0x15d
> [ 7393.914452] [<c1076550>] sys_write+0x3d/0x64
> [ 7393.914455] [<c1003ffe>] syscall_call+0x7/0xb
> [ 7393.914460] =======================
>
I seems that patch hasn't made it into .23... I'll stick it in the
lockdep tree aimed at .24.
next prev parent reply other threads:[~2007-10-13 23:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-13 22:36 [2.6.23.1] possible circular locking dependency detected Folkert van Heusden
2007-10-13 23:19 ` Peter Zijlstra [this message]
2007-10-13 23:59 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1192317596.5625.12.camel@lappy \
--to=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=folkert@vanheusden.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.