From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 6/8] libata: adjust speed down rules
Date: Mon, 5 Nov 2007 14:45:13 +0900 [thread overview]
Message-ID: <11942415173626-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1194241515653-git-send-email-htejun@gmail.com>
Speed down rules were too conservative. Adjust them a bit.
* More than 10 timeouts can't happen in 5 minutes as command timeout
is 30secs. Lower the limit for rule #1 to 6.
* 10 timeouts is too high for rule #3 too. Lower it to 6.
* SATAPI can benefit from falling back to PIO too. Allow SATAPI
devices to fall back to PIO.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-eh.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7f505f1..cf2afb0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1620,13 +1620,13 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
* Even if multiple verdicts are returned, only one action is
* taken per error. ering is cleared after an action is taken.
*
- * 1. If more than 10 ATA_BUS, TOUT_HSM or UNK_DEV errors
+ * 1. If more than 6 ATA_BUS, TOUT_HSM or UNK_DEV errors
* ocurred during last 5 mins, FALLBACK_TO_PIO
*
* 2. If more than 3 TOUT_HSM or UNK_DEV errors occurred
* during last 10 mins, NCQ_OFF.
*
- * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 10
+ * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6
* UNK_DEV errors occurred during last 10 mins, SPEED_DOWN.
*
* LOCKING:
@@ -1649,7 +1649,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
arg.nr_errors[ATA_ECAT_TOUT_HSM] +
- arg.nr_errors[ATA_ECAT_UNK_DEV] > 10)
+ arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
/* scan past 10 mins of error history */
@@ -1663,7 +1663,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 ||
- arg.nr_errors[ATA_ECAT_UNK_DEV] > 10)
+ arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
verdict |= ATA_EH_SPDN_SPEED_DOWN;
return verdict;
@@ -1742,10 +1742,10 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
}
/* Fall back to PIO? Slowing down to PIO is meaningless for
- * SATA. Consider it only for PATA.
+ * SATA ATA devices. Consider it only for PATA and SATAPI.
*/
if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
- (link->ap->cbl != ATA_CBL_SATA) &&
+ (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) &&
(dev->xfer_shift != ATA_SHIFT_PIO)) {
if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
dev->spdn_cnt = 0;
--
1.5.2.4
next prev parent reply other threads:[~2007-11-05 5:45 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-05 5:45 [PATCHSET] libata: update EH speed down logic, take #2 Tejun Heo
2007-11-05 5:45 ` [PATCH 1/8] libata: rearrange ATA_DFLAG_* Tejun Heo
2007-11-05 5:45 ` [PATCH 2/8] libata: add protocol data transfer tests Tejun Heo
2007-11-05 5:45 ` [PATCH 3/8] libata: factor out ata_eh_schedule_probe() Tejun Heo
2007-11-05 10:36 ` Bartlomiej Zolnierkiewicz
2007-11-05 12:29 ` Tejun Heo
2007-11-06 4:53 ` [PATCH 3/8 UPDATED] " Tejun Heo
2007-11-05 5:45 ` [PATCH 4/8] libata: move ata_set_mode() to libata-eh.c Tejun Heo
2007-11-05 5:45 ` [PATCH 5/8] libata: clean up EH speed down implementation Tejun Heo
2007-11-05 5:45 ` Tejun Heo [this message]
2007-11-05 5:45 ` [PATCH 7/8] libata: implement ATA_DFLAG_DUBIOUS_XFER Tejun Heo
2007-11-05 5:45 ` [PATCH 8/8] libata: implement fast speed down for unverified data transfer mode Tejun Heo
2007-11-23 1:07 ` [PATCHSET] libata: update EH speed down logic, take #2 Tejun Heo
2007-11-24 1:04 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2007-11-27 10:28 [PATCHSET] libata: improve EH speed down logic, take #3 Tejun Heo
2007-11-27 10:28 ` [PATCH 6/8] libata: adjust speed down rules Tejun Heo
2007-11-27 22:32 ` Mark Lord
2007-11-27 23:07 ` Tejun Heo
2007-11-27 23:33 ` Mark Lord
2007-11-27 23:35 ` Tejun Heo
2007-11-28 1:10 ` Mark Lord
2007-11-28 8:30 ` Tejun Heo
2007-11-01 15:51 [PATCHSET] libata: update EH speed down logic Tejun Heo
2007-11-01 15:51 ` [PATCH 6/8] libata: adjust speed down rules Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11942415173626-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.