All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
To: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: Re: iozone write 50% regression in kernel 2.6.24-rc1
Date: Fri, 09 Nov 2007 10:54:24 +0100	[thread overview]
Message-ID: <1194602064.6289.157.camel@twins> (raw)
In-Reply-To: <1194601672.20251.60.camel@ymzhang>

[-- Attachment #1: Type: text/plain, Size: 2994 bytes --]

On Fri, 2007-11-09 at 17:47 +0800, Zhang, Yanmin wrote:
> Comparing with 2.6.23, iozone sequential write/rewrite (512M) has 50% regression
> in kernel 2.6.24-rc1. 2.6.24-rc2 has the same regression.
> 
> My machine has 8 processor cores and 8GB memory.
> 
> By bisect, I located patch
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=04fbfdc14e5f48463820d6b9807daa5e9c92c51f.
> 
> 
> Another behavior: with kernel 2.6.23, if I run iozone for many times after rebooting machine,
> the result looks stable. But with 2.6.24-rc1, the first run of iozone got a very small result and
> following run has 4Xorig_result.

So the second run is 4x as fast as the first run?

> What I reported is the regression of 2nd/3rd run, because first run has bigger regression.

So the 2nd and 3rd run are stable at 50% slower than .23?

> I also tried to change /proc/sys/vm/dirty_ratio,dirty_backgroud_ratio and didn't get improvement.

Could you try:

---
Subject: mm: speed up writeback ramp-up on clean systems

We allow violation of bdi limits if there is a lot of room on the
system. Once we hit half the total limit we start enforcing bdi limits
and bdi ramp-up should happen. Doing it this way avoids many small
writeouts on an otherwise idle system and should also speed up the
ramp-up.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Fengguang Wu <wfg@mail.ustc.edu.cn> 
---
 mm/page-writeback.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

Index: linux-2.6/mm/page-writeback.c
===================================================================
--- linux-2.6.orig/mm/page-writeback.c	2007-09-28 10:08:33.937415368 +0200
+++ linux-2.6/mm/page-writeback.c	2007-09-28 10:54:26.018247516 +0200
@@ -355,8 +355,8 @@ get_dirty_limits(long *pbackground, long
  */
 static void balance_dirty_pages(struct address_space *mapping)
 {
-	long bdi_nr_reclaimable;
-	long bdi_nr_writeback;
+	long nr_reclaimable, bdi_nr_reclaimable;
+	long nr_writeback, bdi_nr_writeback;
 	long background_thresh;
 	long dirty_thresh;
 	long bdi_thresh;
@@ -376,11 +376,26 @@ static void balance_dirty_pages(struct a
 
 		get_dirty_limits(&background_thresh, &dirty_thresh,
 				&bdi_thresh, bdi);
+
+		nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
+					global_page_state(NR_UNSTABLE_NFS);
+		nr_writeback = global_page_state(NR_WRITEBACK);
+
 		bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
 		bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
+
 		if (bdi_nr_reclaimable + bdi_nr_writeback <= bdi_thresh)
 			break;
 
+		/*
+		 * Throttle it only when the background writeback cannot
+		 * catch-up. This avoids (excessively) small writeouts
+		 * when the bdi limits are ramping up.
+		 */
+		if (nr_reclaimable + nr_writeback <
+				(background_thresh + dirty_thresh) / 2)
+			break;
+
 		if (!bdi->dirty_exceeded)
 			bdi->dirty_exceeded = 1;
 


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

  reply	other threads:[~2007-11-09  9:54 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-09  9:47 iozone write 50% regression in kernel 2.6.24-rc1 Zhang, Yanmin
2007-11-09  9:54 ` Peter Zijlstra [this message]
2007-11-12  2:14   ` Zhang, Yanmin
2007-11-12  9:45     ` Peter Zijlstra
2007-11-12  9:51       ` Zhang, Yanmin
2007-11-12 13:26         ` Peter Zijlstra
     [not found]           ` <47386BC4.3050403@panasas.com>
2007-11-12 16:48             ` Peter Zijlstra
2007-11-13  2:19               ` Zhang, Yanmin
2007-11-13  8:34                 ` Zhang, Yanmin
2007-11-13 18:32                   ` Peter Zijlstra
2007-11-12 17:25           ` Mark Lord
2007-11-13  1:49             ` Zhang, Yanmin
  -- strict thread matches above, loose matches on Subject: below --
2007-11-09 12:36 Martin Knoblauch
2007-11-12  0:45 ` Zhang, Yanmin
2007-11-12 12:58 Martin Knoblauch
2007-11-13  2:04 ` Zhang, Yanmin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1194602064.6289.157.camel@twins \
    --to=a.p.zijlstra@chello.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yanmin_zhang@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.