From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] Improve configuration of FPGA subsystem
Date: Mon, 12 Nov 2007 18:18:57 +0100 [thread overview]
Message-ID: <1194887941159-git-send-email-matthias.fuchs@esd-electronics.com> (raw)
This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.
See README for the new options:
CONFIG_FPGA,
CONFIG_FPGA_<vendor>,
CONFIG_FPGA_<family>
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
README | 19 ++++++++++++++-----
board/gen860t/fpga.c | 2 +-
board/gen860t/gen860t.c | 2 +-
common/ACEX1K.c | 4 ++--
common/altera.c | 18 +++++++++---------
common/cmd_fpga.c | 2 +-
common/cyclon2.c | 4 ++--
common/fpga.c | 30 +++++++++++-------------------
common/spartan2.c | 2 +-
common/spartan3.c | 2 +-
common/virtex2.c | 2 +-
common/xilinx.c | 28 ++++++++++++++--------------
include/configs/GEN860T.h | 4 +++-
include/configs/M54455EVB.h | 4 +++-
include/configs/alpr.h | 4 +++-
include/xilinx.h | 4 ++--
16 files changed, 69 insertions(+), 62 deletions(-)
diff --git a/README b/README
index 3dad5fc..a33ced7 100644
--- a/README
+++ b/README
@@ -1379,14 +1379,23 @@ The following options need to be configured:
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA
- Specify the number of FPGA devices to support.
+ Enables FPGA subsystem.
+
+ CONFIG_FPGA_<vendor>
+
+ Enables support for specific chip vendors.
+ (ALTERA, XILINX)
- CONFIG_FPGA
+ CONFIG_FPGA_<family>
- Used to specify the types of FPGA devices. For example,
- #define CONFIG_FPGA CFG_XILINX_VIRTEX2
+ Enables support for FPGA family.
+ (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
+
+ CONFIG_FPGA_COUNT
+
+ Specify the number of FPGA devices to support.
CFG_FPGA_PROG_FEEDBACK
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 2ba7e0e..3816e52 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -34,7 +34,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
#if 0
#define GEN860T_FPGA_DEBUG
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index d448f9f..73cc16d 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -254,7 +254,7 @@ int misc_init_r (void)
mii_init ();
#endif
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
gen860t_init_fpga ();
#endif
return 0;
diff --git a/common/ACEX1K.c b/common/ACEX1K.c
index 2a421e2..76dc166 100644
--- a/common/ACEX1K.c
+++ b/common/ACEX1K.c
@@ -28,7 +28,7 @@
#include <common.h> /* core U-Boot definitions */
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_ACEX1K)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -363,4 +363,4 @@ static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset)
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_ACEX1K */
diff --git a/common/altera.c b/common/altera.c
index 06e8a95..0df7bae 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -40,7 +40,7 @@
#define PRINTF(fmt,args...)
#endif
-#if (CONFIG_FPGA & CFG_FPGA_ALTERA)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, char *fn);
@@ -56,11 +56,11 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined CONFIG_FPGA_CYCLON2
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
@@ -88,7 +88,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX)
+#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
@@ -156,9 +156,9 @@ int altera_info( Altera_desc *desc )
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
@@ -192,7 +192,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
} else {
switch (desc->family) {
case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
ret_val = ACEX1K_reloc (desc, reloc_offset);
#else
printf ("%s: No support for ACEX devices.\n",
@@ -200,7 +200,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
#endif
break;
case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_CYCLON2)
+#if defined(CONFIG_FPGA_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
@@ -249,4 +249,4 @@ static int altera_validate (Altera_desc * desc, char *fn)
/* ------------------------------------------------------------------------- */
-#endif /* CONFIG_FPGA & CFG_FPGA_ALTERA */
+#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index cce23ad..3affeba 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -60,7 +60,7 @@ static int fpga_get_op (char *opstr);
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
{
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA_XILINX)
unsigned int length;
unsigned char* swapdata;
unsigned int swapsize;
diff --git a/common/cyclon2.c b/common/cyclon2.c
index dce13b5..06f5e8a 100644
--- a/common/cyclon2.c
+++ b/common/cyclon2.c
@@ -27,7 +27,7 @@
#include <altera.h>
#include <ACEX1K.h> /* ACEX device family */
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
@@ -302,4 +302,4 @@ static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
return ret_val;
}
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */
diff --git a/common/fpga.c b/common/fpga.c
index 2eff239..d8b6ae3 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -67,14 +67,11 @@ static int fpga_dev_info( int devnum );
static void fpga_no_sup( char *fn, char *msg )
{
if ( fn && msg ) {
- printf( "%s: No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- fn, msg, CONFIG_FPGA );
+ printf( "%s: No support for %s.\n", fn, msg);
} else if ( msg ) {
- printf( "No support for %s. CONFIG_FPGA defined as 0x%x.\n",
- msg, CONFIG_FPGA );
+ printf( "No support for %s.\n", msg);
} else {
- printf( "No FPGA suport! CONFIG_FPGA defined as 0x%x.\n",
- CONFIG_FPGA );
+ printf( "No FPGA suport!\n");
}
}
@@ -112,11 +109,6 @@ static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_va
printf( "%s: Null buffer.\n", fn );
return (fpga_desc * const)NULL;
}
- if ( !bsize ) {
- printf( "%s: Null buffer size.\n", fn );
- return (fpga_desc * const)NULL;
- }
-
return desc;
}
@@ -135,7 +127,7 @@ static int fpga_dev_info( int devnum )
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
@@ -143,7 +135,7 @@ static int fpga_dev_info( int devnum )
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
ret_val = altera_info( desc->devdesc );
#else
@@ -175,14 +167,14 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
switch ( devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_reloc( desc, reloc_off );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -268,14 +260,14 @@ int fpga_load( int devnum, void *buf, size_t bsize )
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_load( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -301,14 +293,14 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
if ( desc ) {
switch ( desc->devtype ) {
case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
ret_val = altera_dump( desc->devdesc, buf, bsize );
#else
fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
diff --git a/common/spartan2.c b/common/spartan2.c
index 0fb23b6..0181c35 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -25,7 +25,7 @@
#include <common.h> /* core U-Boot definitions */
#include <spartan2.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN2)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
diff --git a/common/spartan3.c b/common/spartan3.c
index c0f2b05..4bf76a0 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -30,7 +30,7 @@
#include <common.h> /* core U-Boot definitions */
#include <spartan3.h> /* Spartan-II device family */
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN3))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN3)
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
diff --git a/common/virtex2.c b/common/virtex2.c
index b5dc366..1283ff6 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -31,7 +31,7 @@
#include <common.h>
#include <virtex2.h>
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_VIRTEX2)
#if 0
#define FPGA_DEBUG
diff --git a/common/xilinx.c b/common/xilinx.c
index e03e78c..c898238 100644
--- a/common/xilinx.c
+++ b/common/xilinx.c
@@ -32,7 +32,7 @@
#include <spartan2.h>
#include <spartan3.h>
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
#if 0
#define FPGA_DEBUG
@@ -59,7 +59,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Loader...\n",
__FUNCTION__);
ret_val = Spartan2_load (desc, buf, bsize);
@@ -69,7 +69,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Loader...\n",
__FUNCTION__);
ret_val = Spartan3_load (desc, buf, bsize);
@@ -79,7 +79,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Loader...\n",
__FUNCTION__);
ret_val = Virtex2_load (desc, buf, bsize);
@@ -106,7 +106,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
PRINTF ("%s: Launching the Spartan-II Reader...\n",
__FUNCTION__);
ret_val = Spartan2_dump (desc, buf, bsize);
@@ -116,7 +116,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
PRINTF ("%s: Launching the Spartan-III Reader...\n",
__FUNCTION__);
ret_val = Spartan3_dump (desc, buf, bsize);
@@ -126,7 +126,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined( CONFIG_FPGA_VIRTEX2)
PRINTF ("%s: Launching the Virtex-II Reader...\n",
__FUNCTION__);
ret_val = Virtex2_dump (desc, buf, bsize);
@@ -198,7 +198,7 @@ int xilinx_info (Xilinx_desc * desc)
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
Spartan2_info (desc);
#else
/* just in case */
@@ -207,7 +207,7 @@ int xilinx_info (Xilinx_desc * desc)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
Spartan3_info (desc);
#else
/* just in case */
@@ -216,7 +216,7 @@ int xilinx_info (Xilinx_desc * desc)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
Virtex2_info (desc);
#else
/* just in case */
@@ -249,7 +249,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
} else
switch (desc->family) {
case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
ret_val = Spartan2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-II devices.\n",
@@ -257,7 +257,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
#endif
break;
case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
ret_val = Spartan3_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Spartan-III devices.\n",
@@ -265,7 +265,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
#endif
break;
case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
ret_val = Virtex2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for Virtex-II devices.\n",
@@ -308,4 +308,4 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn)
return ret_val;
}
-#endif /* CONFIG_FPGA & CFG_FPGA_XILINX */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_XILINX */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index bfbf3a8..3eb3131 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -273,7 +273,9 @@
* Virtex2 FPGA configuration support
*/
#define CONFIG_FPGA_COUNT 1
-#define CONFIG_FPGA CFG_XILINX_VIRTEX2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_VIRTEX2
#define CFG_FPGA_PROG_FEEDBACK
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index db30958..35637f9 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -192,7 +192,9 @@
/* FPGA - Spartan 2 */
/* experiment
-#define CONFIG_FPGA CFG_SPARTAN3
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
#define CONFIG_FPGA_COUNT 1
#define CFG_FPGA_PROG_FEEDBACK
#define CFG_FPGA_CHECK_CTRLC
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index d88c3ad..324537b 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -296,7 +296,9 @@
/*-----------------------------------------------------------------------
* FPGA stuff
*-----------------------------------------------------------------------*/
-#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
#define CFG_FPGA_CHECK_CTRLC
#define CFG_FPGA_PROG_FEEDBACK
#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
diff --git a/include/xilinx.h b/include/xilinx.h
index 3704e1d..95ebe3d 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -31,11 +31,11 @@
*********************************************************************/
#define CFG_SPARTAN2 CFG_FPGA_DEV( 0x1 )
#define CFG_VIRTEX_E CFG_FPGA_DEV( 0x2 )
-#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
+#define CFG_VIRTEX2 CFG_FPGA_DEV( 0x4 )
#define CFG_SPARTAN3 CFG_FPGA_DEV( 0x8 )
#define CFG_XILINX_SPARTAN2 (CFG_FPGA_XILINX | CFG_SPARTAN2)
#define CFG_XILINX_VIRTEX_E (CFG_FPGA_XILINX | CFG_VIRTEX_E)
-#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
+#define CFG_XILINX_VIRTEX2 (CFG_FPGA_XILINX | CFG_VIRTEX2)
#define CFG_XILINX_SPARTAN3 (CFG_FPGA_XILINX | CFG_SPARTAN3)
/* XXX - Add new models here */
--
1.5.3
next reply other threads:[~2007-11-12 17:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-12 17:18 Matthias Fuchs [this message]
2007-11-12 17:18 ` [U-Boot-Users] [PATCH] Add pre and post configuration callbacks for Spartan FPGAs Matthias Fuchs
2007-11-12 17:18 ` [U-Boot-Users] [PATCH] Add new Xilinx Spartan FPGA types Matthias Fuchs
2007-11-12 17:19 ` [U-Boot-Users] [PATCH] Fix MSB check in Xilinx Spartan slave serial mode Matthias Fuchs
2007-11-12 17:19 ` [U-Boot-Users] [PATCH] Remove bit swapping in Xilinx Spartan bitfile loading Matthias Fuchs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1194887941159-git-send-email-matthias.fuchs@esd-electronics.com \
--to=matthias.fuchs@esd-electronics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.