From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff
Date: Tue, 27 Nov 2007 19:43:40 +0900 [thread overview]
Message-ID: <11961602303116-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <11961602293422-git-send-email-htejun@gmail.com>
* s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g
* Consistently use 0xff to indicate invalid transfer mode (0x00 is
valid for PIO_SLOW).
* Make ata_xfer_mode2mask() return proper mode mask instead of just
the highest bit.
* Sort ata_timing table in increasing xfermode order and update
ata_timing_find_mode() accordingly.
This patch doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-core.c | 82 ++++++++++++++++++++++-----------------------
include/linux/libata.h | 21 ++++++-----
2 files changed, 52 insertions(+), 51 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6077dc1..4f06ba7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -486,9 +486,9 @@ static const struct ata_xfer_ent {
int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
- { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
- { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 },
- { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 },
+ { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
+ { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
+ { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
{ -1, },
};
@@ -503,7 +503,7 @@ static const struct ata_xfer_ent {
* None.
*
* RETURNS:
- * Matching XFER_* value, 0 if no match found.
+ * Matching XFER_* value, 0xff if no match found.
*/
u8 ata_xfer_mask2mode(unsigned int xfer_mask)
{
@@ -513,7 +513,7 @@ u8 ata_xfer_mask2mode(unsigned int xfer_mask)
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
return ent->base + highbit - ent->shift;
- return 0;
+ return 0xff;
}
/**
@@ -534,7 +534,8 @@ unsigned int ata_xfer_mode2mask(u8 xfer_mode)
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
- return 1 << (ent->shift + xfer_mode - ent->base);
+ return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
+ & ~((1 << ent->shift) - 1);
return 0;
}
@@ -1312,7 +1313,7 @@ void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown)
/* Select the mode in use */
mode = ata_xfer_mask2mode(mask);
- if (mode != 0) {
+ if (mode != 0xff) {
ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
ata_mode_string(mask));
} else {
@@ -2786,38 +2787,33 @@ int sata_set_spd(struct ata_link *link)
*/
static const struct ata_timing ata_timing[] = {
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
+ { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
{ XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
-
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
-
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
-
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
-
-/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
@@ -2852,12 +2848,14 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
{
- const struct ata_timing *t;
+ const struct ata_timing *t = ata_timing;
+
+ while (xfer_mode > t->mode)
+ t++;
- for (t = ata_timing; t->mode != xfer_mode; t++)
- if (t->mode == 0xFF)
- return NULL;
- return t;
+ if (xfer_mode == t->mode)
+ return t;
+ return NULL;
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
@@ -3120,7 +3118,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode)
+ if (dev->dma_mode != 0xff)
used_dma = 1;
}
if (!found)
@@ -3131,7 +3129,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
if (!ata_dev_enabled(dev))
continue;
- if (!dev->pio_mode) {
+ if (dev->pio_mode == 0xff) {
ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
rc = -EINVAL;
goto out;
@@ -3145,7 +3143,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || !dev->dma_mode)
+ if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
continue;
dev->xfer_mode = dev->dma_mode;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 12d62df..2a8c925 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -267,17 +267,20 @@ enum {
/* encoding various smaller bitmaps into a single
* unsigned int bitmap
*/
- ATA_BITS_PIO = 7,
- ATA_BITS_MWDMA = 5,
- ATA_BITS_UDMA = 8,
+ ATA_NR_PIO_MODES = 7,
+ ATA_NR_MWDMA_MODES = 5,
+ ATA_NR_UDMA_MODES = 8,
ATA_SHIFT_PIO = 0,
- ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_BITS_PIO,
- ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_BITS_MWDMA,
-
- ATA_MASK_PIO = ((1 << ATA_BITS_PIO) - 1) << ATA_SHIFT_PIO,
- ATA_MASK_MWDMA = ((1 << ATA_BITS_MWDMA) - 1) << ATA_SHIFT_MWDMA,
- ATA_MASK_UDMA = ((1 << ATA_BITS_UDMA) - 1) << ATA_SHIFT_UDMA,
+ ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
+ ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
+
+ ATA_MASK_PIO = ((1 << ATA_NR_PIO_MODES) - 1)
+ << ATA_SHIFT_PIO,
+ ATA_MASK_MWDMA = ((1 << ATA_NR_MWDMA_MODES) - 1)
+ << ATA_SHIFT_MWDMA,
+ ATA_MASK_UDMA = ((1 << ATA_NR_UDMA_MODES) - 1)
+ << ATA_SHIFT_UDMA,
/* size of buffer to pad xfers ending on unaligned boundaries */
ATA_DMA_PAD_SZ = 4,
--
1.5.2.4
next prev parent reply other threads:[~2007-11-27 10:48 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-27 10:43 [PATCHSET] libata: improve timing code and fix pata_amd transfer mode selection, take #2 Tejun Heo
2007-11-27 10:43 ` [PATCH 01/12] ata_generic: unindent loop in generic_set_mode() Tejun Heo
2007-12-01 23:19 ` Jeff Garzik
2007-11-27 10:43 ` [PATCH 02/12] libata: export xfermode / PATA timing related functions Tejun Heo
2007-11-27 10:43 ` Tejun Heo [this message]
2007-11-27 10:43 ` [PATCH 04/12] libata: kill ata_id_to_dma_mode() Tejun Heo
2007-11-27 11:30 ` Alan Cox
2007-11-27 13:52 ` Tejun Heo
2007-12-01 23:22 ` Jeff Garzik
2007-11-27 10:43 ` [PATCH 05/12] libata: xfer_mask is unsigned long not unsigned int Tejun Heo
2007-11-27 10:43 ` [PATCH 06/12] libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes() Tejun Heo
2007-11-27 10:43 ` [PATCH 07/12] libata: fix ata_acpi_gtm_xfermask() Tejun Heo
2007-11-27 10:43 ` [PATCH 08/12] libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi Tejun Heo
2007-11-27 10:43 ` [PATCH 09/12] libata: implement ata_acpi_init_gtm() Tejun Heo
2007-11-27 10:43 ` [PATCH 10/12] libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() Tejun Heo
2007-11-27 10:43 ` [PATCH 11/12] libata: add ATA_CBL_PATA_IGN Tejun Heo
2007-11-27 10:43 ` [PATCH 12/12] pata_amd: update mode selection for NV PATAs Tejun Heo
2007-11-27 11:23 ` Alan Cox
2007-12-01 23:22 ` Jeff Garzik
2007-12-02 14:15 ` Alan Cox
-- strict thread matches above, loose matches on Subject: below --
2007-11-06 5:38 [PATCHSET] libata: update timing and fix pata_amd transfer mode selection Tejun Heo
2007-11-06 5:39 ` [PATCH 03/12] libata: clean up xfermode / PATA timing related stuff Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11961602303116-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.