From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org,
alan@lxorguk.ukuu.org.uk, liml@rtr.ca, albertl@mail.com,
jens.axboe@oracle.com
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 02/14] cdrom: add more GPCMD_* constants
Date: Thu, 29 Nov 2007 23:33:25 +0900 [thread overview]
Message-ID: <11963468184135-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <1196346817387-git-send-email-htejun@gmail.com>
Add GPCMD_* constants for READ_BUFFER, WRITE_12 and WRITE_BUFFER for
completeness. These will be used libata.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
include/linux/cdrom.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index c6d3e22..fcdc11b 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -451,6 +451,7 @@ struct cdrom_generic_command
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
#define GPCMD_READ_10 0x28
#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_BUFFER 0x3c
#define GPCMD_READ_BUFFER_CAPACITY 0x5c
#define GPCMD_READ_CDVD_CAPACITY 0x25
#define GPCMD_READ_CD 0xbe
@@ -480,7 +481,9 @@ struct cdrom_generic_command
#define GPCMD_TEST_UNIT_READY 0x00
#define GPCMD_VERIFY_10 0x2f
#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_12 0xaa
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_WRITE_BUFFER 0x3b
/* This is listed as optional in ATAPI 2.6, but is (curiously)
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
--
1.5.2.4
next prev parent reply other threads:[~2007-11-29 14:33 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-29 14:33 [PATCHSET] libata: improve ATAPI data transfer handling, take #2 Tejun Heo
2007-11-29 14:33 ` [PATCH 01/14] libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size Tejun Heo
2007-11-29 15:51 ` Alan Cox
2007-12-04 19:27 ` Jeff Garzik
2007-12-05 0:47 ` Tejun Heo
2007-11-29 14:33 ` Tejun Heo [this message]
2007-11-29 14:33 ` [PATCH 03/14] libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* Tejun Heo
2007-11-29 15:52 ` Alan Cox
2007-11-29 14:33 ` [PATCH 04/14] libata: add ATAPI_* cmd types and implement atapi_cmd_type() Tejun Heo
2007-11-29 14:33 ` [PATCH 05/14] libata: make ->data_xfer return the number of consumed bytes Tejun Heo
2007-11-29 15:55 ` Alan Cox
2007-11-29 16:06 ` Tejun Heo
2007-11-29 17:42 ` Alan Cox
2007-11-29 18:00 ` Tejun Heo
2007-11-29 18:24 ` Alan Cox
2007-11-29 18:57 ` Mark Lord
2007-11-29 19:37 ` Jeff Garzik
2007-11-29 19:36 ` Jeff Garzik
2007-11-29 21:22 ` Alan Cox
2007-12-04 19:30 ` Jeff Garzik
2007-12-05 0:49 ` Tejun Heo
2007-12-05 1:05 ` Jeff Garzik
2007-11-29 14:33 ` [PATCH 06/14] libata: improve ATAPI draining Tejun Heo
2007-11-29 15:59 ` Alan Cox
2007-11-29 16:09 ` Tejun Heo
2007-11-29 16:42 ` Tejun Heo
2007-11-29 17:40 ` Alan Cox
2007-11-29 18:11 ` Tejun Heo
2007-11-29 18:19 ` Alan Cox
2007-12-04 10:06 ` Albert Lee
2007-12-05 1:00 ` Tejun Heo
2007-11-29 14:33 ` [PATCH 07/14] libata: make atapi_request_sense() use sg Tejun Heo
2007-11-29 14:33 ` [PATCH 08/14] libata: kill non-sg DMA interface Tejun Heo
2007-11-29 16:00 ` Alan Cox
2007-12-04 19:31 ` Jeff Garzik
2007-12-05 1:02 ` Tejun Heo
2007-11-29 14:33 ` [PATCH 09/14] libata: change ATA_QCFLAG_DMAMAP semantics Tejun Heo
2007-11-29 14:33 ` [PATCH 10/14] libata: convert to chained sg Tejun Heo
2007-11-29 14:33 ` [PATCH 11/14] libata: add qc->dma_nbytes Tejun Heo
2007-11-29 16:02 ` Alan Cox
2007-12-04 19:33 ` Jeff Garzik
2007-12-05 1:02 ` Tejun Heo
2007-11-29 14:33 ` [PATCH 12/14] libata: implement ATAPI drain buffer Tejun Heo
2007-11-29 14:33 ` [PATCH 13/14] libata: implement ATAPI per-command-type DMA horkages Tejun Heo
2007-11-29 16:04 ` Alan Cox
2007-11-29 16:10 ` Tejun Heo
2007-11-29 14:33 ` [PATCH 14/14] libata: use PIO for misc ATAPI commands Tejun Heo
2007-11-29 16:05 ` Alan Cox
2007-11-29 16:14 ` Tejun Heo
2007-11-29 16:16 ` Tejun Heo
2007-11-29 18:55 ` Mark Lord
2007-11-29 22:52 ` Tejun Heo
2007-11-30 1:03 ` Mark Lord
2007-11-30 1:34 ` Tejun Heo
2007-11-30 4:19 ` Mark Lord
2007-11-30 13:40 ` Alan Cox
2007-11-30 13:59 ` Tejun Heo
2007-11-30 14:12 ` Jeff Garzik
2007-11-30 15:36 ` Alan Cox
2007-11-30 13:09 ` Alan Cox
2007-11-29 17:38 ` Alan Cox
2007-12-04 19:34 ` Jeff Garzik
2007-12-05 1:14 ` Tejun Heo
2007-12-05 12:47 ` Alan Cox
2007-12-05 13:03 ` Tejun Heo
2007-12-05 14:01 ` Alan Cox
2007-12-05 14:22 ` Tejun Heo
2007-12-05 14:46 ` Alan Cox
2007-12-05 15:13 ` Tejun Heo
2007-12-05 18:52 ` Jeff Garzik
2007-12-06 11:03 ` Petr Vandrovec
2007-12-06 11:10 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11963468184135-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertl@mail.com \
--cc=jeff@garzik.org \
--cc=jens.axboe@oracle.com \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.