From: Timur Tabi <timur@freescale.com>
To: netdev@vger.kernel.org, linuxppc-dev@ozlabs.org,
galak@kernel.crashing.org
Cc: Timur Tabi <timur@freescale.com>
Subject: [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties
Date: Mon, 3 Dec 2007 15:17:59 -0600 [thread overview]
Message-ID: <1196716685975-git-send-email-timur@freescale.com> (raw)
In-Reply-To: <1196716680381-git-send-email-timur@freescale.com>
Updates the ucc_geth device driver to check the new rx-clock-name and
tx-clock-name properties first. If present, it uses the new function
qe_clock_source() to obtain the clock source. Otherwise, it checks the
deprecated rx-clock and tx-clock properties.
Update the device trees for 832x, 836x, and 8568 to contain the new property
names only.
Signed-off-by: Timur Tabi <timur@freescale.com>
---
This patch applies to Kumar's for-2.6.25 branch. ucc_geth will compile but not
run if my other patch, "qe: add function qe_clock_source" has not also been
applied.
arch/powerpc/boot/dts/mpc832x_mds.dts | 8 ++--
arch/powerpc/boot/dts/mpc832x_rdb.dts | 8 ++--
arch/powerpc/boot/dts/mpc836x_mds.dts | 8 ++--
arch/powerpc/boot/dts/mpc8568mds.dts | 8 ++--
drivers/net/ucc_geth.c | 55 ++++++++++++++++++++++++++++++--
5 files changed, 67 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index c64f303..fe54489 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -223,8 +223,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <19>;
- tx-clock = <1a>;
+ rx-clock-name = "clk9";
+ tx-clock-name = "clk10";
phy-handle = < &phy3 >;
pio-handle = < &pio3 >;
};
@@ -244,8 +244,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <17>;
- tx-clock = <18>;
+ rx-clock-name = "clk7";
+ tx-clock-name = "clk8";
phy-handle = < &phy4 >;
pio-handle = < &pio4 >;
};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 388c8a7..e68a08b 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -202,8 +202,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <20>;
- tx-clock = <13>;
+ rx-clock-name = "clk16";
+ tx-clock-name = "clk3";
phy-handle = <&phy00>;
pio-handle = <&ucc2pio>;
};
@@ -223,8 +223,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <19>;
- tx-clock = <1a>;
+ rx-clock-name = "clk9";
+ tx-clock-name = "clk10";
phy-handle = <&phy04>;
pio-handle = <&ucc3pio>;
};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 0b2d2b5..bfd48d0 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -254,8 +254,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <0>;
- tx-clock = <19>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk9";
phy-handle = < &phy0 >;
phy-connection-type = "rgmii-id";
pio-handle = < &pio1 >;
@@ -276,8 +276,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <0>;
- tx-clock = <14>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk4";
phy-handle = < &phy1 >;
phy-connection-type = "rgmii-id";
pio-handle = < &pio2 >;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 5439437..cf45aab 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -333,8 +333,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <0>;
- tx-clock = <20>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk16";
pio-handle = <&pio1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
@@ -355,8 +355,8 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
- rx-clock = <0>;
- tx-clock = <20>;
+ rx-clock-name = "none";
+ tx-clock-name = "clk16";
pio-handle = <&pio2>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index a3ff270..a93342e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3814,6 +3814,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
int err, ucc_num, max_speed = 0;
const phandle *ph;
const unsigned int *prop;
+ const char *sprop;
const void *mac_addr;
phy_interface_t phy_interface;
static const int enet_to_speed[] = {
@@ -3846,10 +3847,56 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.ucc_num = ucc_num;
- prop = of_get_property(np, "rx-clock", NULL);
- ug_info->uf_info.rx_clock = *prop;
- prop = of_get_property(np, "tx-clock", NULL);
- ug_info->uf_info.tx_clock = *prop;
+ sprop = of_get_property(np, "rx-clock-name", NULL);
+ if (sprop) {
+ ug_info->uf_info.rx_clock = qe_clock_source(sprop);
+ if ((ug_info->uf_info.rx_clock < QE_CLK_NONE) ||
+ (ug_info->uf_info.rx_clock > QE_CLK24)) {
+ printk(KERN_ERR
+ "ucc_geth: invalid rx-clock-name property\n");
+ return -EINVAL;
+ }
+ } else {
+ prop = of_get_property(np, "rx-clock", NULL);
+ if (!prop) {
+ /* If both rx-clock-name and rx-clock are missing,
+ we want to tell people to use rx-clock-name. */
+ printk(KERN_ERR
+ "ucc_geth: missing rx-clock-name property\n");
+ return -EINVAL;
+ }
+ if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
+ printk(KERN_ERR
+ "ucc_geth: invalid rx-clock propperty\n");
+ return -EINVAL;
+ }
+ ug_info->uf_info.rx_clock = *prop;
+ }
+
+ sprop = of_get_property(np, "tx-clock-name", NULL);
+ if (sprop) {
+ ug_info->uf_info.tx_clock = qe_clock_source(sprop);
+ if ((ug_info->uf_info.tx_clock < QE_CLK_NONE) ||
+ (ug_info->uf_info.tx_clock > QE_CLK24)) {
+ printk(KERN_ERR
+ "ucc_geth: invalid tx-clock-name property\n");
+ return -EINVAL;
+ }
+ } else {
+ prop = of_get_property(np, "rx-clock", NULL);
+ if (!prop) {
+ printk(KERN_ERR
+ "ucc_geth: mising tx-clock-name property\n");
+ return -EINVAL;
+ }
+ if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
+ printk(KERN_ERR
+ "ucc_geth: invalid tx-clock property\n");
+ return -EINVAL;
+ }
+ ug_info->uf_info.tx_clock = *prop;
+ }
+
err = of_address_to_resource(np, 0, &res);
if (err)
return -EINVAL;
--
1.5.2.4
next prev parent reply other threads:[~2007-12-03 21:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-03 21:17 [PATCH 0/2] QE clock source improvements Timur Tabi
2007-12-03 21:17 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi
2007-12-03 21:17 ` Timur Tabi [this message]
2007-12-12 15:19 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi
2007-12-14 5:07 ` Kumar Gala
2007-12-14 5:07 ` Kumar Gala
2007-12-14 6:45 ` Jeff Garzik
2007-12-14 6:45 ` Jeff Garzik
2007-12-14 7:19 ` Kumar Gala
2007-12-12 15:19 ` [PATCH 1/2] qe: add function qe_clock_source() Timur Tabi
-- strict thread matches above, loose matches on Subject: below --
2007-10-10 22:37 [PATCH 0/2] QE clock source improvements Timur Tabi
2007-10-10 22:37 ` [PATCH 1/2] qe: add function qe_clock_source Timur Tabi
2007-10-10 22:37 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi
2007-10-10 22:18 [PATCH 0/2] QE clock source improvements Timur Tabi
2007-10-10 22:18 ` [PATCH 1/2] qe: add function qe_clock_source Timur Tabi
2007-10-10 22:18 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi
2007-10-10 22:12 [PATCH 1/2] qe: add function qe_clock_source Timur Tabi
2007-10-10 22:12 ` [PATCH 2/2] ucc_geth: use rx-clock-name and tx-clock-name device tree properties Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1196716685975-git-send-email-timur@freescale.com \
--to=timur@freescale.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.