From: michaelc@cs.wisc.edu
To: linux-scsi@vger.kernel.org
Cc: Mike Christie <michaelc@cs.wisc.edu>
Subject: [PATCH 2/2] qla4xxx: Add target reset functionality
Date: Tue, 18 Dec 2007 22:11:09 -0600 [thread overview]
Message-ID: <11980374792817-git-send-email-michaelc@cs.wisc.edu> (raw)
In-Reply-To: <1198037477766-git-send-email-michaelc@cs.wisc.edu>
From: Mike Christie <michaelc@cs.wisc.edu>
This patch adds target reset functionalty.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
---
drivers/scsi/qla4xxx/ql4_fw.h | 1 +
drivers/scsi/qla4xxx/ql4_glbl.h | 2 +
drivers/scsi/qla4xxx/ql4_mbx.c | 39 ++++++++++++++++++++
drivers/scsi/qla4xxx/ql4_os.c | 74 ++++++++++++++++++++++++++++++++++-----
4 files changed, 107 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index fe415ec..ed8ee66 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -216,6 +216,7 @@ union external_hw_config_reg {
#define MBOX_CMD_ABOUT_FW 0x0009
#define MBOX_CMD_PING 0x000B
#define MBOX_CMD_LUN_RESET 0x0016
+#define MBOX_CMD_TARGET_WARM_RESET 0x0017
#define MBOX_CMD_GET_MANAGEMENT_DATA 0x001E
#define MBOX_CMD_GET_FW_STATUS 0x001F
#define MBOX_CMD_SET_ISNS_SERVICE 0x0021
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index a3608e0..b403a17 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -27,6 +27,8 @@ int qla4xxx_relogin_device(struct scsi_qla_host * ha,
struct ddb_entry * ddb_entry);
int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
int lun);
+int qla4xxx_reset_target(struct scsi_qla_host * ha,
+ struct ddb_entry * ddb_entry);
int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
uint32_t offset, uint32_t len);
int qla4xxx_get_firmware_status(struct scsi_qla_host * ha);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 35cd73c..c577d79 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -713,6 +713,45 @@ int qla4xxx_reset_lun(struct scsi_qla_host * ha, struct ddb_entry * ddb_entry,
return status;
}
+/**
+ * qla4xxx_reset_target - issues target Reset
+ * @ha: Pointer to host adapter structure.
+ * @db_entry: Pointer to device database entry
+ * @un_entry: Pointer to lun entry structure
+ *
+ * This routine performs a TARGET RESET on the specified target.
+ * The caller must ensure that the ddb_entry pointers
+ * are valid before calling this routine.
+ **/
+int qla4xxx_reset_target(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry)
+{
+ uint32_t mbox_cmd[MBOX_REG_COUNT];
+ uint32_t mbox_sts[MBOX_REG_COUNT];
+ int status = QLA_SUCCESS;
+
+ DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
+ ddb_entry->os_target_id));
+
+ /*
+ * Send target reset command to ISP, so that the ISP will return all
+ * outstanding requests with RESET status
+ */
+ memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+ memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+ mbox_cmd[0] = MBOX_CMD_TARGET_WARM_RESET;
+ mbox_cmd[1] = ddb_entry->fw_ddb_index;
+ mbox_cmd[5] = 0x01; /* Immediate Command Enable */
+
+ qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 1, &mbox_cmd[0],
+ &mbox_sts[0]);
+ if (mbox_sts[0] != MBOX_STS_COMMAND_COMPLETE &&
+ mbox_sts[0] != MBOX_STS_COMMAND_ERROR)
+ status = QLA_ERROR;
+
+ return status;
+}
int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr,
uint32_t offset, uint32_t len)
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index f55b9f7..05e6991 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -73,6 +73,7 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session);
static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
void (*done) (struct scsi_cmnd *));
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
+static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
@@ -85,6 +86,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
.queuecommand = qla4xxx_queuecommand,
.eh_device_reset_handler = qla4xxx_eh_device_reset,
+ .eh_target_reset_handler = qla4xxx_eh_target_reset,
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.slave_configure = qla4xxx_slave_configure,
@@ -1506,7 +1508,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
}
/**
- * qla4xxx_eh_wait_for_active_target_commands - wait for active cmds to finish.
+ * qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
* @ha: pointer to to HBA
* @t: target id
* @l: lun id
@@ -1514,20 +1516,22 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
* This function waits for all outstanding commands to a lun to complete. It
* returns 0 if all pending commands are returned and 1 otherwise.
**/
-static int qla4xxx_eh_wait_for_active_target_commands(struct scsi_qla_host *ha,
- int t, int l)
+static int qla4xxx_eh_wait_for_commands(struct scsi_qla_host *ha,
+ struct scsi_target *stgt,
+ struct scsi_device *sdev)
{
int cnt;
int status = 0;
struct scsi_cmnd *cmd;
/*
- * Waiting for all commands for the designated target in the active
- * array
+ * Waiting for all commands for the designated target or dev
+ * in the active array
*/
for (cnt = 0; cnt < ha->host->can_queue; cnt++) {
cmd = scsi_host_find_tag(ha->host, cnt);
- if (cmd && cmd->device->id == t && cmd->device->lun == l) {
+ if (cmd && stgt == scsi_target(cmd->device) &&
+ (!sdev || sdev == cmd->device)) {
if (!qla4xxx_eh_wait_on_command(ha, cmd)) {
status++;
break;
@@ -1580,9 +1584,8 @@ static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd)
* for the device.
*/
if (cmd->device->host->shost_state == SHOST_RECOVERY) {
- if (qla4xxx_eh_wait_for_active_target_commands(ha,
- cmd->device->id,
- cmd->device->lun)){
+ if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device),
+ cmd->device)) {
dev_info(&ha->pdev->dev,
"DEVICE RESET FAILED - waiting for "
"commands.\n");
@@ -1603,6 +1606,59 @@ eh_dev_reset_done:
}
/**
+ * qla4xxx_eh_target_reset - callback for target reset.
+ * @cmd: Pointer to Linux's SCSI command structure
+ *
+ * This routine is called by the Linux OS to reset the target.
+ **/
+static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd)
+{
+ struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
+ struct ddb_entry *ddb_entry = cmd->device->hostdata;
+ int stat;
+
+ if (!ddb_entry)
+ return FAILED;
+
+ starget_printk(KERN_INFO, scsi_target(cmd->device),
+ "WARM TARGET RESET ISSUED.\n");
+
+ DEBUG2(printk(KERN_INFO
+ "scsi%ld: TARGET_DEVICE_RESET cmd=%p jiffies = 0x%lx, "
+ "to=%x,dpc_flags=%lx, status=%x allowed=%d\n",
+ ha->host_no, cmd, jiffies, cmd->timeout_per_command / HZ,
+ ha->dpc_flags, cmd->result, cmd->allowed));
+
+ stat = qla4xxx_reset_target(ha, ddb_entry);
+ if (stat != QLA_SUCCESS) {
+ starget_printk(KERN_INFO, scsi_target(cmd->device),
+ "WARM TARGET RESET FAILED.\n");
+ return FAILED;
+ }
+
+ /* Send marker. */
+ ha->marker_needed = 1;
+
+ /*
+ * If we are coming down the EH path, wait for all commands to complete
+ * for the target
+ */
+ if (cmd->device->host->shost_state == SHOST_RECOVERY) {
+ if (qla4xxx_eh_wait_for_commands(ha, scsi_target(cmd->device),
+ NULL)) {
+ starget_printk(KERN_INFO, scsi_target(cmd->device),
+ "WARM TARGET DEVICE RESET FAILED - "
+ "waiting for commands.\n");
+ return FAILED;
+ }
+ }
+
+ starget_printk(KERN_INFO, scsi_target(cmd->device),
+ "WARM TARGET RESET SUCCEEDED.\n");
+ return SUCCESS;
+}
+
+/**
* qla4xxx_eh_host_reset - kernel callback
* @cmd: Pointer to Linux's SCSI command structure
*
--
1.5.1.2
next prev parent reply other threads:[~2007-12-19 4:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-19 4:11 RFC: add target reset handler to scsi_error.c michaelc
2007-12-19 4:11 ` [PATCH 1/2] scsi error: add target reset eh handler michaelc
2007-12-19 4:11 ` michaelc [this message]
2007-12-21 21:26 ` [PATCH 2/2] qla4xxx: Add target reset functionality David Somayajulu
2007-12-21 21:36 ` [PATCH 1/2] scsi error: add target reset eh handler James Bottomley
2007-12-27 3:21 ` Mike Christie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11980374792817-git-send-email-michaelc@cs.wisc.edu \
--to=michaelc@cs.wisc.edu \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.