From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, "Michael Chan" <mchan@broadcom.com>,
andy@greyhouse.net
Subject: [PATCH 4/8] tg3: Replace some magic 5704S constants
Date: Thu, 20 Dec 2007 15:21:39 -0800 [thread overview]
Message-ID: <1198192899.0@teletran1> (raw)
This patch replaces magic values with preprocessor definitions for
the sg_dig_ctrl and sg_dig_status registers. This is preparatory work
for the next patch.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9e51457..9985166 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2683,7 +2683,7 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status)
sg_dig_ctrl = tr32(SG_DIG_CTRL);
if (tp->link_config.autoneg != AUTONEG_ENABLE) {
- if (sg_dig_ctrl & (1 << 31)) {
+ if (sg_dig_ctrl & SG_DIG_USING_HW_AUTONEG) {
if (workaround) {
u32 val = serdes_cfg;
@@ -2693,7 +2693,8 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status)
val |= 0x4010000;
tw32_f(MAC_SERDES_CFG, val);
}
- tw32_f(SG_DIG_CTRL, 0x01388400);
+
+ tw32_f(SG_DIG_CTRL, SG_DIG_COMMON_SETUP);
}
if (mac_status & MAC_STATUS_PCS_SYNCED) {
tg3_setup_flow_control(tp, 0, 0);
@@ -2703,13 +2704,13 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status)
}
/* Want auto-negotiation. */
- expected_sg_dig_ctrl = 0x81388400;
+ expected_sg_dig_ctrl = SG_DIG_USING_HW_AUTONEG | SG_DIG_COMMON_SETUP;
/* Pause capability */
- expected_sg_dig_ctrl |= (1 << 11);
+ expected_sg_dig_ctrl |= SG_DIG_PAUSE_CAP;
/* Asymettric pause */
- expected_sg_dig_ctrl |= (1 << 12);
+ expected_sg_dig_ctrl |= SG_DIG_ASYM_PAUSE;
if (sg_dig_ctrl != expected_sg_dig_ctrl) {
if ((tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
@@ -2724,7 +2725,7 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status)
restart_autoneg:
if (workaround)
tw32_f(MAC_SERDES_CFG, serdes_cfg | 0xc011000);
- tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl | (1 << 30));
+ tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl | SG_DIG_SOFT_RESET);
udelay(5);
tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl);
@@ -2735,22 +2736,22 @@ restart_autoneg:
sg_dig_status = tr32(SG_DIG_STATUS);
mac_status = tr32(MAC_STATUS);
- if ((sg_dig_status & (1 << 1)) &&
+ if ((sg_dig_status & SG_DIG_AUTONEG_COMPLETE) &&
(mac_status & MAC_STATUS_PCS_SYNCED)) {
u32 local_adv, remote_adv;
local_adv = ADVERTISE_PAUSE_CAP;
remote_adv = 0;
- if (sg_dig_status & (1 << 19))
+ if (sg_dig_status & SG_DIG_PARTNER_PAUSE_CAPABLE)
remote_adv |= LPA_PAUSE_CAP;
- if (sg_dig_status & (1 << 20))
+ if (sg_dig_status & SG_DIG_PARTNER_ASYM_PAUSE)
remote_adv |= LPA_PAUSE_ASYM;
tg3_setup_flow_control(tp, local_adv, remote_adv);
current_link_up = 1;
tp->serdes_counter = 0;
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
- } else if (!(sg_dig_status & (1 << 1))) {
+ } else if (!(sg_dig_status & SG_DIG_AUTONEG_COMPLETE)) {
if (tp->serdes_counter)
tp->serdes_counter--;
else {
@@ -2765,7 +2766,7 @@ restart_autoneg:
tw32_f(MAC_SERDES_CFG, val);
}
- tw32_f(SG_DIG_CTRL, 0x01388400);
+ tw32_f(SG_DIG_CTRL, SG_DIG_COMMON_SETUP);
udelay(40);
/* Link parallel detection - link is up */
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ac47c17..3938eb3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -545,6 +545,8 @@
#define SG_DIG_FIBER_MODE 0x00008000
#define SG_DIG_REMOTE_FAULT_MASK 0x00006000
#define SG_DIG_PAUSE_MASK 0x00001800
+#define SG_DIG_PAUSE_CAP 0x00000800
+#define SG_DIG_ASYM_PAUSE 0x00001000
#define SG_DIG_GBIC_ENABLE 0x00000400
#define SG_DIG_CHECK_END_ENABLE 0x00000200
#define SG_DIG_SGMII_AUTONEG_TIMER 0x00000100
@@ -556,6 +558,11 @@
#define SG_DIG_AUTONEG_LOW_ENABLE 0x00000004
#define SG_DIG_REMOTE_LOOPBACK 0x00000002
#define SG_DIG_LOOPBACK 0x00000001
+#define SG_DIG_COMMON_SETUP (SG_DIG_CRC16_CLEAR_N | \
+ SG_DIG_LOCAL_DUPLEX_STATUS | \
+ SG_DIG_LOCAL_LINK_STATUS | \
+ (0x2 << SG_DIG_SPEED_STATUS_SHIFT) | \
+ SG_DIG_FIBER_MODE | SG_DIG_GBIC_ENABLE)
#define SG_DIG_STATUS 0x000005b4
#define SG_DIG_CRC16_BUS_MASK 0xffff0000
#define SG_DIG_PARTNER_FAULT_MASK 0x00600000 /* If !MRADV_CRC16_SELECT */
next reply other threads:[~2007-12-20 23:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-20 23:21 Matt Carlson [this message]
[not found] <1198191599.0@teletran1>
2007-12-21 4:08 ` [PATCH 4/8] tg3: Replace some magic 5704S constants David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1198192899.0@teletran1 \
--to=mcarlson@broadcom.com \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.