All of lore.kernel.org
 help / color / mirror / Atom feed
From: Don Fry <pcnet32@verizon.net>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net
Subject: Re: [PATCH 5/7]: [NET]: Fix drivers to handle napi_disable()	disabling interrupts.
Date: Tue, 08 Jan 2008 22:14:29 -0800	[thread overview]
Message-ID: <1199859269.9002.6.camel@Linux.home> (raw)

Tested pcnet32 on x86_64 box and see no problems with the change.
The code is only exercised if doing loopback testing, or changing
the ring size during a receive storm.

Acked-by:  Don Fry <pcnet32@verizon.net>
---

[NET]: Fix drivers to handle napi_disable() disabling interrupts.

When we add the generic napi_disable_pending() breakout
logic to net_rx_action() it means that napi_disable()
can cause NAPI poll interrupt events to be disabled.

And this is exactly what we want.  If a napi_disable()
is pending, and we are looping in the ->poll(), we want
->poll() event interrupts to stay disabled and we want
to complete the NAPI poll ASAP.

When ->poll() break out during device down was being handled on a
per-driver basis, often these drivers would turn interrupts back on
when '!netif_running()' was detected.

And this would just cause a reschedule of the NAPI ->poll() in the
interrupt handler before the napi_disable() could get in there and
grab the NAPI_STATE_SCHED bit.

The vast majority of drivers don't care if napi_disable() might have
the side effect of disabling NAPI ->poll() event interrupts.  In all
such cases, when a napi_disable() is performed, the driver just
disabled interrupts or is about to.

However there were three exceptions to this in PCNET32, R8169, and
SKY2.  To fix those cases, at the subsequent napi_enable() points, I
added code to ensure that the ->poll() interrupt events are enabled in
the hardware.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/pcnet32.c |    5 +++++
 drivers/net/r8169.c   |    2 ++
 drivers/net/sky2.c    |    3 +++
 3 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index ff92aca..90498ff 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -455,9 +455,14 @@ static void pcnet32_netif_start(struct net_device
*dev)
 {
 #ifdef CONFIG_PCNET32_NAPI
 	struct pcnet32_private *lp = netdev_priv(dev);
+	ulong ioaddr = dev->base_addr;
+	u16 val;
 #endif
 	netif_wake_queue(dev);
 #ifdef CONFIG_PCNET32_NAPI
+	val = lp->a.read_csr(ioaddr, CSR3);
+	val &= 0x00ff;
+	lp->a.write_csr(ioaddr, CSR3, val);
 	napi_enable(&lp->napi);
 #endif
 }
-- 
1.5.4.rc2.38.gd6da3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html




             reply	other threads:[~2008-01-09  6:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-09  6:14 Don Fry [this message]
2008-01-09  6:44 ` [PATCH 5/7]: [NET]: Fix drivers to handle napi_disable() disabling interrupts David Miller
  -- strict thread matches above, loose matches on Subject: below --
2008-01-08  5:40 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1199859269.9002.6.camel@Linux.home \
    --to=pcnet32@verizon.net \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.