From: Glauber de Oliveira Costa <gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Cc: avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org,
virtualization-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
marcelot-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
Glauber de Oliveira Costa
<gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH] cpu hotplug driver: kernel module
Date: Wed, 9 Jan 2008 08:21:05 -0200 [thread overview]
Message-ID: <11998740731943-git-send-email-gcosta@redhat.com> (raw)
In-Reply-To: <11998740663306-git-send-email-gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Glauber de Oliveira Costa <gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/virtio/Kconfig | 6 +
drivers/virtio/Makefile | 1 +
drivers/virtio/virtio_cpu.c | 226 +++++++++++++++++++++++++++++++++++++++++++
drivers/virtio/virtio_pci.c | 1 +
kernel/cpu.c | 2 +
5 files changed, 236 insertions(+), 0 deletions(-)
create mode 100644 drivers/virtio/virtio_cpu.c
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 73a414c..6665d4d 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -23,3 +23,9 @@ config VIRTIO_PCI
If unsure, say M.
+config VIRTIO_CPU
+ tristate "virtio-cpu"
+ depends on VIRTIO_PCI && EXPERIMENTAL
+ ---help---
+ I'll obviously put a better description later
+
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index cc84999..057ebcc 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_VIRTIO) += virtio.o
obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
+obj-$(CONFIG_VIRTIO_CPU) += virtio_cpu.o
diff --git a/drivers/virtio/virtio_cpu.c b/drivers/virtio/virtio_cpu.c
new file mode 100644
index 0000000..8dc0c7d
--- /dev/null
+++ b/drivers/virtio/virtio_cpu.c
@@ -0,0 +1,226 @@
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+
+#include <linux/cpu.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+#include <linux/freezer.h>
+
+#define VIRTIO_ID_CPU 4
+
+#define CMD_CPU_SET 1
+
+struct virtio_hotplug_hdr {
+ u8 cmd;
+ u8 status;
+};
+
+struct hotplug_buf {
+ struct virtio_hotplug_hdr hdr;
+ u32 arg;
+};
+
+struct virtio_hotplug {
+ struct virtio_device *dev;
+ struct virtqueue *cmd_receive;
+ struct task_struct *hotplug_thread;
+ wait_queue_head_t hotplug_wait;
+ u32 hotplug_target;
+ int thread_started;
+};
+
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_CPU, VIRTIO_DEV_ANY_ID},
+ { 0 },
+};
+
+void *__alloc_virtio_buf(int size)
+{
+ return kzalloc(size, GFP_KERNEL);
+}
+
+#define alloc_hotplug_buf() (__alloc_virtio_buf(sizeof(struct hotplug_buf)))
+
+static int __send_hotplug_buf(u8 cmd, struct hotplug_buf *buf,
+ struct virtqueue *vq)
+{
+ struct scatterlist sg[2];
+ int err = 0;
+
+ sg_init_table(sg, 2);
+
+ sg_set_buf(&sg[0], &buf->hdr, sizeof(buf->hdr));
+ sg_set_buf(&sg[1], &buf->arg, sizeof(buf->arg));
+
+ err = vq->vq_ops->add_buf(vq, sg, 0, 2, buf);
+ if (err)
+ return err;
+
+ vq->vq_ops->kick(vq);
+
+ return 0;
+}
+
+/* Prepare the virtio driver to receive a command. */
+static int prepare_to_receive(struct virtio_hotplug *v)
+{
+ void *buf = alloc_hotplug_buf();
+
+ if (!buf)
+ return -ENOMEM;
+
+ return __send_hotplug_buf(0, buf, v->cmd_receive);
+}
+
+static void hotplug_add_cpus(struct virtio_hotplug *v)
+{
+ struct sys_device *dev;
+ struct virtqueue *vq = v->cmd_receive;
+ struct hotplug_buf *buf;
+ int i, len;
+ int err;
+
+ while ((buf = vq->vq_ops->get_buf(vq, &len)) != NULL) {
+ switch (buf->hdr.cmd) {
+ case CMD_CPU_SET:
+ v->hotplug_target = buf->arg;
+
+ if (v->hotplug_target > num_present_cpus())
+ v->hotplug_target = num_present_cpus();
+ break;
+ default:
+ printk("%s: Unrecognized command %d\n",
+ __func__, buf->hdr.cmd);
+ break;
+ }
+ }
+ kfree(buf);
+
+
+ while ((i = num_online_cpus()) < v->hotplug_target) {
+ err = cpu_up(i);
+ dev = get_cpu_sysdev(i);
+ if (!err) {
+ if (dev)
+ kobject_uevent(&dev->kobj, KOBJ_ONLINE);
+ }
+ }
+
+ while ((i = num_online_cpus()) > v->hotplug_target) {
+ i--;
+ dev = get_cpu_sysdev(i);
+ err = cpu_down(i);
+ if (!err) {
+ if (dev)
+ kobject_uevent(&dev->kobj, KOBJ_ONLINE);
+ }
+ }
+}
+
+static int virtio_do_hotplug(void *p)
+{
+ struct virtio_hotplug *v = p;
+ DEFINE_WAIT(wait);
+ set_freezable();
+
+ for (;;) {
+ prepare_to_receive(v);
+ prepare_to_wait(&v->hotplug_wait, &wait, TASK_UNINTERRUPTIBLE);
+ v->thread_started = 1;
+ schedule();
+ finish_wait(&v->hotplug_wait, &wait);
+
+ try_to_freeze();
+
+ if (kthread_should_stop())
+ break;
+
+ hotplug_add_cpus(v);
+ v->hotplug_target = 0;
+ }
+ return 0;
+}
+
+/* We need a separate thread because cpu_up() and cpu_down() cannot
+ * be called in interrupt context */
+static bool hotplug_get_cmd(struct virtqueue *vq)
+{
+ struct virtio_hotplug *v = vq->vdev->priv;
+
+ wake_up(&v->hotplug_wait);
+ return true;
+
+}
+
+static int virtio_cpu_probe(struct virtio_device *vdev)
+{
+ int err;
+ struct virtio_hotplug *v;
+
+ v = kzalloc(sizeof(*v), GFP_KERNEL);
+ if (!v)
+ return -ENOMEM;
+
+
+ if (IS_ERR(v->cmd_receive)) {
+ printk("%s: Couldn't find cmd_receive queue\n", __func__);
+ return PTR_ERR(v->cmd_receive);
+ }
+
+ vdev->priv = v;
+
+ init_waitqueue_head(&v->hotplug_wait);
+
+ v->thread_started = 0;
+ v->hotplug_thread = kthread_run(virtio_do_hotplug, v,
+ "virtio_hotplugd\n");
+
+ if (IS_ERR(v->hotplug_thread)) {
+ err = PTR_ERR(v->hotplug_thread);
+ goto out;
+ }
+
+ v->cmd_receive = vdev->config->find_vq(vdev, 0, hotplug_get_cmd);
+
+ printk("Registered virtio hotplug driver\n");
+ return 0;
+out:
+ vdev->config->del_vq(v->cmd_receive);
+ return err;
+}
+
+static void virtio_cpu_remove(struct virtio_device *vdev)
+{
+ struct virtio_hotplug *v = vdev->priv;
+ kthread_stop(v->hotplug_thread);
+ vdev->config->del_vq(v->cmd_receive);
+ kfree(v);
+}
+
+
+static struct virtio_driver virtio_cpu = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtio_cpu_probe,
+ .remove = __devexit_p(virtio_cpu_remove),
+};
+
+static int __init virtio_cpu_init(void)
+{
+ return register_virtio_driver(&virtio_cpu);
+}
+
+static void __exit virtio_cpu_exit(void)
+{
+ unregister_virtio_driver(&virtio_cpu);
+}
+
+module_init(virtio_cpu_init);
+module_exit(virtio_cpu_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Glauber de Oliveira Costa");
+MODULE_DESCRIPTION("virtio driver for cpu hotplugging");
+MODULE_VERSION("1");
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index e1fa68d..8d5a719 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -67,6 +67,7 @@ static struct pci_device_id virtio_pci_id_table[] = {
{ 0x1AF4, 0x1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dummy entry */
{ 0x1AF4, 0x1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dummy entry */
{ 0x1AF4, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Dummy entry */
+ { 0x2523, 0x2325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* cpu hotplug driver */
{ 0 },
};
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 6b3a0c1..c432c28 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -219,6 +219,7 @@ int cpu_down(unsigned int cpu)
mutex_unlock(&cpu_add_remove_lock);
return err;
}
+EXPORT_SYMBOL_GPL(cpu_down);
#endif /*CONFIG_HOTPLUG_CPU*/
/* Requires cpu_add_remove_lock to be held */
@@ -284,6 +285,7 @@ int __cpuinit cpu_up(unsigned int cpu)
mutex_unlock(&cpu_add_remove_lock);
return err;
}
+EXPORT_SYMBOL_GPL(cpu_up);
#ifdef CONFIG_PM_SLEEP_SMP
static cpumask_t frozen_cpus;
--
1.5.0.6
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
next prev parent reply other threads:[~2008-01-09 10:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-09 10:21 [PATCH/RFC 0/2] CPU hotplug virtio driver Glauber de Oliveira Costa
2008-01-09 10:21 ` [PATCH] cpu hotplug driver: kernel module Glauber de Oliveira Costa
2008-01-09 10:42 ` [kvm-devel] [PATCH/RFC 0/2] CPU hotplug virtio driver Avi Kivity
[not found] ` <11998740663306-git-send-email-gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2008-01-09 10:21 ` Glauber de Oliveira Costa [this message]
2008-01-09 10:21 ` [PATCH] cpu hotplug driver: userspace back end Glauber de Oliveira Costa
[not found] ` <11998740731943-git-send-email-gcosta-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2008-01-09 10:21 ` Glauber de Oliveira Costa
2008-01-09 10:42 ` [PATCH/RFC 0/2] CPU hotplug virtio driver Avi Kivity
2008-01-09 14:12 ` [kvm-devel] " Glauber de Oliveira Costa
[not found] ` <4784A50E.6050302-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-09 14:12 ` Glauber de Oliveira Costa
2008-01-09 11:27 ` Christian Borntraeger
2008-01-09 14:21 ` [kvm-devel] " Glauber de Oliveira Costa
2008-01-09 14:37 ` Avi Kivity
[not found] ` <4784D882.1030104-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2008-01-09 14:37 ` Avi Kivity
[not found] ` <4784DC29.1020907-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2008-01-22 4:11 ` Dong, Eddie
2008-01-22 4:11 ` [kvm-devel] " Dong, Eddie
2008-01-09 11:27 ` Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11998740731943-git-send-email-gcosta@redhat.com \
--to=gcosta-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=marcelot-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=virtualization-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.