From: "Denis V. Lunev" <den@openvz.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, devel@openvz.org,
"Denis V. Lunev" <den@openvz.org>
Subject: [PATCH 1/2 net-2.6.25] [IPV4] Remove extra argument from arp_ignore.
Date: Mon, 14 Jan 2008 17:04:40 +0300 [thread overview]
Message-ID: <1200319481-18459-1-git-send-email-den@openvz.org> (raw)
arp_ignore has two arguments: dev & in_dev. dev is used for inet_confirm_addr
calling only.
inet_confirm_addr, in turn, either gets in_dev from the device passed or
iterates over all network devices if the device passed is NULL. It seems
logical to directly pass in_dev into inet_confirm_addr.
Signed-off-by: Denis V. Lunev <den@openvz.org>
---
include/linux/inetdevice.h | 2 +-
net/ipv4/arp.c | 11 +++++------
net/ipv4/devinet.c | 17 ++++++-----------
3 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index b3c5081..45f3731 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -135,7 +135,7 @@ extern int devinet_ioctl(unsigned int cmd, void __user *);
extern void devinet_init(void);
extern struct in_device *inetdev_by_index(int);
extern __be32 inet_select_addr(const struct net_device *dev, __be32 dst, int scope);
-extern __be32 inet_confirm_addr(const struct net_device *dev, __be32 dst, __be32 local, int scope);
+extern __be32 inet_confirm_addr(struct in_device *in_dev, __be32 dst, __be32 local, int scope);
extern struct in_ifaddr *inet_ifa_byprefix(struct in_device *in_dev, __be32 prefix, __be32 mask);
static __inline__ int inet_ifa_match(__be32 addr, struct in_ifaddr *ifa)
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index e944d98..f38e1a9 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -382,8 +382,7 @@ static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
read_unlock_bh(&neigh->lock);
}
-static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
- __be32 sip, __be32 tip)
+static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
{
int scope;
@@ -403,7 +402,7 @@ static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
case 3: /* Do not reply for scope host addresses */
sip = 0;
scope = RT_SCOPE_LINK;
- dev = NULL;
+ in_dev = NULL;
break;
case 4: /* Reserved */
case 5:
@@ -415,7 +414,7 @@ static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
default:
return 0;
}
- return !inet_confirm_addr(dev, sip, tip, scope);
+ return !inet_confirm_addr(in_dev, sip, tip, scope);
}
static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
@@ -807,7 +806,7 @@ static int arp_process(struct sk_buff *skb)
if (sip == 0) {
if (arp->ar_op == htons(ARPOP_REQUEST) &&
inet_addr_type(&init_net, tip) == RTN_LOCAL &&
- !arp_ignore(in_dev,dev,sip,tip))
+ !arp_ignore(in_dev, sip, tip))
arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
dev->dev_addr, sha);
goto out;
@@ -825,7 +824,7 @@ static int arp_process(struct sk_buff *skb)
int dont_send = 0;
if (!dont_send)
- dont_send |= arp_ignore(in_dev,dev,sip,tip);
+ dont_send |= arp_ignore(in_dev,sip,tip);
if (!dont_send && IN_DEV_ARPFILTER(in_dev))
dont_send |= arp_filter(sip,tip,dev);
if (!dont_send)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 03db15b..dc1665a 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -968,24 +968,19 @@ static __be32 confirm_addr_indev(struct in_device *in_dev, __be32 dst,
/*
* Confirm that local IP address exists using wildcards:
- * - dev: only on this interface, 0=any interface
+ * - in_dev: only on this interface, 0=any interface
* - dst: only in the same subnet as dst, 0=any dst
* - local: address, 0=autoselect the local address
* - scope: maximum allowed scope value for the local address
*/
-__be32 inet_confirm_addr(const struct net_device *dev, __be32 dst, __be32 local, int scope)
+__be32 inet_confirm_addr(struct in_device *in_dev,
+ __be32 dst, __be32 local, int scope)
{
__be32 addr = 0;
- struct in_device *in_dev;
-
- if (dev) {
- rcu_read_lock();
- if ((in_dev = __in_dev_get_rcu(dev)))
- addr = confirm_addr_indev(in_dev, dst, local, scope);
- rcu_read_unlock();
+ struct net_device *dev;
- return addr;
- }
+ if (in_dev != NULL)
+ return confirm_addr_indev(in_dev, dst, local, scope);
read_lock(&dev_base_lock);
rcu_read_lock();
--
1.5.3.rc5
next reply other threads:[~2008-01-14 14:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-14 14:04 Denis V. Lunev [this message]
2008-01-14 14:04 ` [PATCH 2/2 net-2.6.25] [NETNS] Process inet_confirm_addr in the correct namespace Denis V. Lunev
2008-01-14 14:37 ` [PATCH 1/2 net-2.6.25] [IPV4] Remove extra argument from arp_ignore David Miller
2008-01-14 14:43 ` Denis V. Lunev
2008-01-14 14:49 ` Denis V. Lunev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200319481-18459-1-git-send-email-den@openvz.org \
--to=den@openvz.org \
--cc=davem@davemloft.net \
--cc=devel@openvz.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.