From mboxrd@z Thu Jan 1 00:00:00 1970 From: forwind Subject: Re: problems with Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Date: Tue, 22 Jan 2008 22:55:13 +0000 Message-ID: <1201042513.5507.3.camel@localhost> References: Reply-To: forward@forwind.net Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from harwood.textdrive.com (harwood.textdrive.com [207.7.108.201]) by alsa0.perex.cz (Postfix) with ESMTP id 622E424C19 for ; Tue, 22 Jan 2008 23:55:19 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org Takashi wrote: > Good to hear. Could you show the output of "lspci -nv" for the audio > device? We can add the entry for your device so that the driver works > without an extra model option. I think this is what you are after: 00:1b.0 0403: 8086:284b (rev 03) Subsystem: 1071:8253 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 hope this helps. Conor On Mon, 2008-01-21 at 18:01 +0100, Takashi Iwai wrote: > At Mon, 21 Jan 2008 16:49:00 +0000, > Forwinder wrote: > > > > Takashi wrote: > > > > >It's a VERY old version. Try to install the latest ALSA HG version or > > >the daily snapshot tarball. If it still doesn't work, check the codec > > >from /proc/asound/card0/codec#* file, and try to pass model option > > >values listed in ALSA-Configuration.txt. > > > > I installed 1.0.15 from the website and had to add 'acer-aspire' as an > > option inorder to get it to work. With 'acer' as the option the > > speakers worked but the headphones didn't but 'acer-aspire' as the > > option the speakers and headphones worked but the speakers did not mute > > when headphones were plugged into the socket. > > > > now it's working pretty okay. > > Good to hear. Could you show the output of "lspci -nv" for the audio > device? We can add the entry for your device so that the driver works > without an extra model option. > > > thanks, > > Takashi