From: Tejun Heo <htejun@gmail.com>
To: jeff@garzik.org, linux-ide@vger.kernel.org
Cc: Tejun Heo <htejun@gmail.com>
Subject: [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME
Date: Thu, 24 Jan 2008 00:21:38 +0900 [thread overview]
Message-ID: <12011017013287-git-send-email-htejun@gmail.com> (raw)
In-Reply-To: <12011017011072-git-send-email-htejun@gmail.com>
Now that hardreset is the preferred method of resetting, there's no
need for ATA_LFLAG_HRST_TO_RESUME flag. Kill it.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/ahci.c | 2 +-
drivers/ata/libata-pmp.c | 16 ----------------
drivers/ata/sata_nv.c | 5 -----
drivers/ata/sata_sil.c | 5 -----
include/linux/libata.h | 1 -
5 files changed, 1 insertions(+), 28 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a3caa01..e400fc9 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -407,7 +407,7 @@ static const struct ata_port_info ahci_port_info[] = {
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
+ .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 133246b..9d17158 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -453,9 +453,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -468,9 +465,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -483,9 +477,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
@@ -513,13 +504,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
- } else if (vendor == 0x11ab && devid == 0x4140) {
- /* Marvell 88SM4140 quirks. Fan-out ports require PHY
- * reset to work; other than that, it behaves very
- * nicely.
- */
- ata_port_for_each_link(link, ap)
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
}
}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 233b4ff..e1d05a2 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -578,7 +578,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -589,7 +588,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -600,7 +598,6 @@ static const struct ata_port_info nv_port_info[] = {
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -612,7 +609,6 @@ static const struct ata_port_info nv_port_info[] = {
.sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
@@ -624,7 +620,6 @@ static const struct ata_port_info nv_port_info[] = {
.sht = &nv_swncq_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0b8191b..7052915 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -60,7 +60,6 @@ enum {
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
- SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
@@ -215,7 +214,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -225,7 +223,6 @@ static const struct ata_port_info sil_port_info[] = {
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -234,7 +231,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -243,7 +239,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 52232f1..76bb797 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -162,7 +162,6 @@ enum {
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
- ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H
* Register FIS clearing BSY */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
--
1.5.2.4
next prev parent reply other threads:[~2008-01-23 15:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-23 15:21 [PATCHSET libata-dev#upstream] libata: prefer hardreset Tejun Heo
2008-01-23 15:21 ` [PATCH 1/5] " Tejun Heo
2008-01-28 2:43 ` Tejun Heo
2008-01-28 2:47 ` Tejun Heo
2008-01-23 15:21 ` Tejun Heo [this message]
2008-01-23 15:21 ` [PATCH 3/5] libata: kill ATA_EHI_RESUME_LINK Tejun Heo
2008-01-23 15:21 ` [PATCH 4/5] libata: kill ATA_LFLAG_SKIP_D2H_BSY Tejun Heo
2008-01-23 15:21 ` [PATCH 5/5] libata: kill ata_ehi_schedule_probe() Tejun Heo
2008-02-01 20:17 ` [PATCHSET libata-dev#upstream] libata: prefer hardreset Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2008-03-11 3:41 [PATCHSET libata-dev#upstream] libata: prefer hardreset, take #2 Tejun Heo
2008-03-11 3:41 ` [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME Tejun Heo
2008-03-11 4:27 [PATCHSET #upstream-fixes] block/libata: update and use block layer padding and draining, take 3 Tejun Heo
2008-03-11 4:27 ` [PATCH 2/5] libata: kill ATA_LFLAG_HRST_TO_RESUME Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12011017013287-git-send-email-htejun@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.