From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PATCH] final SCSI updates for 2.6.24 merge window
Date: Thu, 07 Feb 2008 18:56:46 -0600 [thread overview]
Message-ID: <1202432206.3171.53.camel@localhost.localdomain> (raw)
Quite a bit of this is fixing things broken previously (the advansys fix
is still pending resolution, but I'll send it as an -rc fix when we have
it). There's the final elimination of all drivers that are esp based
but don't use the scsi_esp core (that's mostly m68k and alpha). Plus
the usual bunch of driver updates and the addition of a new enclosure
services driver and the corresponding ULD.
The patch is available from:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
The short changelog is:
Adrian Bunk (2):
advansys: make 3 functions static
libiscsi: make __iscsi_complete_pdu() static
Aegis Lin (1):
ps3rom: sector size should be 512 bytes
Andrew Morton (1):
dc395x: fix uninitialized var warning
Andrew Vasquez (9):
qla2xxx: Update version number to 8.02.00-k8.
qla2xxx: Correct issue where incorrect init-fw mailbox command was used on
qla2xxx: Move RISC-interrupt-register modifications to qla2x00_request_irq
qla2xxx: Consolidate RISC-parity enablement codes.
qla2xxx: Cleanse memory allocation logic during probe.
qla2xxx: Clear EFT buffer before firmware reinitialization.
qla2xxx: Cleanup any outstanding SRB resources during shutdown.
qla2xxx: Add MODULE_FIRMWARE hint for ISP25XX firmware.
qla2xxx: Correct resource_size_t usages.
Boaz Harrosh (1):
arm: convert to accessors and !use_sg cleanup
James Bottomley (10):
ses: add new Enclosure ULD
enclosure: add support for enclosure services
sr: fix test unit ready responses
NCR53C9x: remove driver
remove m68k NCR53C9x based drivers
dec_esp: Remove driver
update my email address
add protocol definitions
sd: handle bad lba in sense information
mca_53c9x: remove driver
Mike Christie (12):
iscsi: bump version to 2.0-868
libiscsi: fix session age rollover and remove cid encoding
iscsi: fix up iscsi printk prefix
iscsi class: fix iscsi conn attr counter
libiscsi: fix setting of nop timer
qla4xxx: add async scan support
iscsi class: add async scan helper
qla4xxx: fix recovery timer and session unblock race
iscsi class: add session scanning
qla4xxx: use iscsi class session state check ready
qla4xxx: directly call iscsi recovery functions
iscsi class, libiscsi: add iscsi sysfs session state file
Nick Cheng (1):
arcmsr: updates (1.20.00.15)
Pavel Machek (1):
Small cleanups for scsi_host.h
Randy Dunlap (1):
kernel-doc: fix scsi docbook
Roel Kluin (1):
u14-34f: fix data direction bug
Salyzyn, Mark (3):
aacraid: do not set valid bit in sense information
aacraid: pci_set_dma_max_seg_size opened up for late model controllers
aacraid: fib context lock for management ioctls (take 2)
Seokmann Ju (2):
qla2xxx: Access the proper 'physical' port in FC-transport callbacks.
qla2xxx: Correct issue where vport-state was not updated during an ISP_ABO
Thomas Bogendoerfer (1):
sun3x_esp: convert to esp_scsi
Tony Battersby (2):
fix BUG when sum(scatterlist) > bufflen
sym53c8xx: fix resid calculation
and the diffstat:
Documentation/DocBook/scsi.tmpl | 2
Documentation/scsi/ChangeLog.arcmsr | 41
Documentation/scsi/scsi_mid_low_api.txt | 2
drivers/misc/Kconfig | 9
drivers/misc/Makefile | 1
drivers/misc/enclosure.c | 484 ++++
drivers/scsi/Kconfig | 93
drivers/scsi/Makefile | 12
drivers/scsi/NCR53C9x.c | 3654 --------------------------------
drivers/scsi/NCR53C9x.h | 668 -----
drivers/scsi/aacraid/aachba.c | 81
drivers/scsi/aacraid/commctrl.c | 26
drivers/scsi/aacraid/linit.c | 28
drivers/scsi/advansys.c | 6
drivers/scsi/arcmsr/arcmsr.h | 4
drivers/scsi/arcmsr/arcmsr_hba.c | 87
drivers/scsi/arm/acornscsi.c | 14
drivers/scsi/arm/scsi.h | 87
drivers/scsi/blz1230.c | 353 ---
drivers/scsi/blz2060.c | 306 --
drivers/scsi/cyberstorm.c | 377 ---
drivers/scsi/cyberstormII.c | 314 --
drivers/scsi/dc395x.c | 2
drivers/scsi/dec_esp.c | 687 ------
drivers/scsi/fastlane.c | 421 ---
drivers/scsi/iscsi_tcp.c | 57
drivers/scsi/libiscsi.c | 137 -
drivers/scsi/mac_esp.c | 751 ------
drivers/scsi/mca_53c9x.c | 520 ----
drivers/scsi/oktagon_esp.c | 606 -----
drivers/scsi/oktagon_io.S | 194 -
drivers/scsi/ps3rom.c | 2
drivers/scsi/qla2xxx/qla_attr.c | 24
drivers/scsi/qla2xxx/qla_def.h | 2
drivers/scsi/qla2xxx/qla_gbl.h | 1
drivers/scsi/qla2xxx/qla_init.c | 87
drivers/scsi/qla2xxx/qla_inline.h | 7
drivers/scsi/qla2xxx/qla_isr.c | 27
drivers/scsi/qla2xxx/qla_mbx.c | 2
drivers/scsi/qla2xxx/qla_os.c | 404 +--
drivers/scsi/qla2xxx/qla_sup.c | 36
drivers/scsi/qla2xxx/qla_version.h | 2
drivers/scsi/qla4xxx/ql4_init.c | 1
drivers/scsi/qla4xxx/ql4_os.c | 75
drivers/scsi/scsi.c | 5
drivers/scsi/scsi_lib.c | 1
drivers/scsi/scsi_transport_iscsi.c | 238 +-
drivers/scsi/sd.c | 34
drivers/scsi/ses.c | 689 ++++++
drivers/scsi/sr.c | 49
drivers/scsi/sr.h | 1
drivers/scsi/sr_ioctl.c | 3
drivers/scsi/sun3x_esp.c | 546 ++--
drivers/scsi/sym53c8xx_2/sym_hipd.c | 2
drivers/scsi/u14-34f.c | 2
include/linux/enclosure.h | 129 +
include/scsi/iscsi_proto.h | 4
include/scsi/libiscsi.h | 30
include/scsi/scsi.h | 14
include/scsi/scsi_host.h | 44
include/scsi/scsi_transport_iscsi.h | 43
61 files changed, 2494 insertions(+), 10034 deletions(-)
James
next reply other threads:[~2008-02-08 0:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-08 0:56 James Bottomley [this message]
2008-02-08 1:04 ` [GIT PATCH] final SCSI updates for 2.6.24 merge window Harvey Harrison
2008-02-08 1:07 ` James Bottomley
2008-02-08 1:14 ` Harvey Harrison
2008-02-08 9:03 ` Geert Uytterhoeven
2008-02-08 16:37 ` James Bottomley
2008-02-11 21:13 ` Harvey Harrison
2008-02-11 22:02 ` James Bottomley
2008-02-08 1:37 ` James Bottomley
2008-02-08 3:53 ` FUJITA Tomonori
2008-02-08 2:46 ` Andrew Morton
2008-02-08 3:11 ` Linus Torvalds
2008-02-08 5:05 ` Christoph Hellwig
2008-02-08 3:16 ` James Bottomley
2008-02-08 3:24 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1202432206.3171.53.camel@localhost.localdomain \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.